CSMS 5297202·Trade policy·October 24, 2005·View on csms.cbp.gov ↗

CASH DEPOSIT INSTRUCTIONS FOR CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA PRODUCED AND EXPORTED BY SEED TIMBER CO. LTD. (C-122-839-080)

Plain-English explanation

CSMS 5297202 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin (trade policy), published on October 24, 2005. It carries the official CBP guidance brokers and importers must follow for the topic — "CASH DEPOSIT INSTRUCTIONS FOR CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA PRODUCED AND EXPORTED BY SEED TIMBER CO. LTD. (C-122-839-080)". It links to 1 AD/CVD case in Tandom's catalog. CSMS messages are the operational layer between Commerce determinations and at-the-border collections: when Commerce publishes a new rate, scope ruling, or instruction, CBP turns it into a CSMS that ACE/ACS systems and brokers act on.

Linked AD/CVD cases(1)

Cases referenced or affected by this CSMS message

C-122-839

Message body

Full text as published by U.S. Customs and Border Protection

MESSAGE NO: 5297202 DATE: 10 24 2005 CATEGORY: CVD TYPE: ADM REFERENCE: REFERENCE DATE: CASES: C - 122 - 839 - - - - - - - - - - PERIOD COVERED: 09 28 2005 TO LIQ SUSPENSION DATE: TO: DIRECTORS OF FIELD OPERATIONS PORT DIRECTORS FROM: DIRECTOR, SPECIAL ENFORCEMENT RE: CASH DEPOSIT INSTRUCTIONS FOR CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA PRODUCED AND EXPORTED BY SEED TIMBER CO. LTD. (C-122-839-080) 1. THE DEPARTMENT OF COMMERCE HAS PUBLISHED IN THE FEDERAL REGISTER ON SEPTEMBER 28, 2005 (70 FR 56640) THE FINAL RESULTS OF ITS NEW SHIPPER REVIEW OF A CERTAIN PRODUCER/EXPORTER SUBJECT TO THE COUNTERVAILING DUTY ORDER (C-122-839) ON CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA FOR THE PERIOD 01/01/03 THROUGH 12/31/03. 2. IMPORTS COVERED BY THIS REVIEW ARE SOFTWOOD LUMBER, FLOORING AND SIDING (SOFTWOOD LUMBER PRODUCTS). SOFTWOOD LUMBER PRODUCTS INCLUDE ALL PRODUCTS CLASSIFIED UNDER SUBHEADINGS 4407.1000, 4409.1010, 4409.1090, AND 4409.1020, RESPECTIVELY, OF THE HARMONIZED TARIFF SCHEDULE OF THE UNITED STATES (HTSUS), AND ANY SOFTWOOD LUMBER, FLOORING AND SIDING DESCRIBED BELOW. THESE SOFTWOOD LUMBER PRODUCTS INCLUDE: (1) CONIFEROUS WOOD, SAWN OR CHIPPED LENGTHWISE, SLICED OR PEELED, WHETHER OR NOT PLANED, SANDED OR FINGER-JOINTED, OF A THICKNESS EXCEEDING SIX MILLIMETERS; (2) CONIFEROUS WOOD SIDING (INCLUDING STRIPS AND FRIEZES FOR PARQUET FLOORING, NOT ASSEMBLED) CONTINUOUSLY SHAPED (TONGUED, GROOVED, RABBETED, CHAMFERED, V-JOINTED, BEADED, MOLDED, ROUNDED OR THE LIKE) ALONG ANY OF ITS EDGES OR FACES, WHETHER OR NOT PLANED, SANDED OR FINGER-JOINTED; (3) OTHER CONIFEROUS WOOD (INCLUDING STRIPS AND FRIEZES FOR PARQUET FLOORING, NOT ASSEMBLED) CONTINUOUSLY SHAPED (TONGUED, GROOVED, RABBETED, CHAMFERED, V-JOINTED, BEADED, MOLDED, ROUNDED OR THE LIKE) ALONG ANY OF ITS EDGES OR FACES (OTHER THAN WOOD MOLDINGS AND WOOD DOWEL RODS) WHETHER OR NOT PLANED, SANDED OR FINGER-JOINTED; AND (4) CONIFEROUS WOOD FLOORING (INCLUDING STRIPS AND FRIEZES FOR PARQUET FLOORING, NOT ASSEMBLED) CONTINUOUSLY SHAPED (TONGUED, GROOVED, RABBETED, CHAMFERED, V-JOINTED, BEADED, MOLDED, ROUNDED OR THE LIKE) ALONG ANY OF ITS EDGES OR FACES, WHETHER OR NOT PLANED, SANDED OR FINGER-JOINTED. ALTHOUGH THE HTSUS SUBHEADINGS ARE PROVIDED FOR CONVENIENCE AND CUSTOMS PURPOSES, THE WRITTEN DESCRIPTION OF THE MERCHANDISE SUBJECT TO THIS ORDER IS DISPOSITIVE. AS SPECIFICALLY STATED IN THE ISSUES AND DECISION MEMORANDUM ACCOMPANYING THE NOTICE OF FINAL DETERMINATION OF SALES AT LESS THAN FAIR VALUE: CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA, 67 FR 15539 (APRIL 2, 2002) (SEE COMMENT 53, ITEM D, PAGE 116, AND COMMENT 57, ITEM B-7, PAGE 126), AVAILABLE AT WWW.IA.ITA.DOC.GOV/FRN/, DRILLED AND NOTCHED LUMBER AND ANGLE CUT LUMBER ARE COVERED BY THE SCOPE OF THIS ORDER. THE FOLLOWING SOFTWOOD LUMBER PRODUCTS ARE EXCLUDED FROM THE SCOPE OF THIS ORDER PROVIDED THEY MEET THE SPECIFIED REQUIREMENTS DETAILED BELOW: (1) STRINGERS (PALLET COMPONENTS USED FOR RUNNERS): IF THEY HAVE AT LEAST TWO NOTCHES ON THE SIDE, POSITIONED AT EQUAL DISTANCE FROM THE CENTER, TO PROPERLY ACCOMMODATE FORKLIFT BLADES, PROPERLY CLASSIFIED UNDER HTSUS 4421.90.98.40. (2) BOX-SPRING FRAME KITS: IF THEY CONTAIN THE FOLLOWING WOODEN PIECES - TWO SIDE RAILS, TWO END (OR TOP) RAILS AND VARYING NUMBERS OF SLATS. THE SIDE RAILS AND THE END RAILS SHOULD BE RADIUS-CUT AT BOTH ENDS. THE KITS SHOULD BE INDIVIDUALLY PACKAGED, THEY SHOULD CONTAIN THE EXACT NUMBER OF WOODEN COMPONENTS NEEDED TO MAKE A PARTICULAR BOX SPRING FRAME, WITH NO FURTHER PROCESSING REQUIRED. NONE OF THE COMPONENTS EXCEEDS 1" IN ACTUAL THICKNESS OR 83" IN LENGTH. (3) RADIUS-CUT BOX-SPRING-FRAME COMPONENTS, NOT EXCEEDING 1" IN ACTUAL THICKNESS OR 83" IN LENGTH, READY FOR ASSEMBLY WITHOUT FURTHER PROCESSING. THE RADIUS CUTS MUST BE PRESENT ON BOTH ENDS OF THE BOARDS AND MUST BE SUBSTANTIAL CUTS SO AS TO COMPLETELY ROUND ONE CORNER. (4) FENCE PICKETS REQUIRING NO FURTHER PROCESSING AND PROPERLY CLASSIFIED UNDER HTSUS 4421.90.70, 1" OR LESS IN ACTUAL THICKNESS, UP TO 8" WIDE, 6' OR LESS IN LENGTH, AND HAVE FINIALS OR DECORATIVE CUTTINGS THAT CLEARLY IDENTIFY THEM AS FENCE PICKETS. IN THE CASE OF DOG-EARED FENCE PICKETS, THE CORNERS OF THE BOARDS SHOULD BE CUT OFF SO AS TO REMOVE PIECES OF WOOD IN THE SHAPE OF ISOSCELES RIGHT ANGLE TRIANGLES WITH SIDES MEASURING 3/4 INCH OR MORE. (5) U.S. ORIGIN LUMBER SHIPPED TO CANADA FOR MINOR PROCESSING AND IMPORTED INTO THE UNITED STATES, IS EXCLUDED FROM THE SCOPE OF THIS ORDER IF THE FOLLOWING CONDITIONS ARE MET: 1) THE PROCESSING OCCURRING IN CANADA IS LIMITED TO KILN-DRYING, PLANING TO CREATE SMOOTH-TO-SIZE BOARD, AND SANDING, AND 2) IF THE IMPORTER ESTABLISHES TO THE SATISFACTION OF U.S. CUSTOMS AND BORDER PROTECTION (CBP) THAT THE LUMBER IS OF U.S. ORIGIN. (6) SOFTWOOD LUMBER PRODUCTS CONTAINED IN SINGLE FAMILY HOME PACKAGES OR KITS, (TO ENSURE ADMINISTRABILITY, WE CLARIFIED THE LANGUAGE OF EXCLUSION NUMBER 6 TO REQUIRE AN IMPORTER CERTIFICATION AND TO PERMIT SINGLE OR MULTIPLE ENTRIES ON MULTIPLE DAYS AS WELL AS INSTRUCTING IMPORTERS TO RETAIN AND MAKE AVAILABLE FOR INSPECTION SPECIFIC DOCUMENTATION IN SUPPORT OF EACH ENTRY.) REGARDLESS OF TARIFF CLASSIFICATION, ARE EXCLUDED FROM THE SCOPE OF THIS ORDER IF THE IMPORTER CERTIFIES TO ITEMS 6 A, B, C, D, AND REQUIREMENT 6 E IS MET: A. THE IMPORTED HOME PACKAGE OR KIT CONSTITUTES A FULL PACKAGE OF THE NUMBER OF WOODEN PIECES SPECIFIED IN THE PLAN, DESIGN OR BLUEPRINT NECESSARY TO PRODUCE A HOME OF AT LEAST 700 SQUARE FEET PRODUCED TO A SPECIFIED PLAN, DESIGN OR BLUEPRINT; B. THE PACKAGE OR KIT MUST CONTAIN ALL NECESSARY INTERNAL AND EXTERNAL DOORS AND WINDOWS, NAILS, SCREWS, GLUE, SUB FLOOR, SHEATHING, BEAMS, POSTS, CONNECTORS, AND IF INCLUDED IN THE PURCHASE CONTRACT, DECKING, TRIM, DRYWALL AND ROOF SHINGLES SPECIFIED IN THE PLAN, DESIGN OR BLUEPRINT. C. PRIOR TO IMPORTATION, THE PACKAGE OR KIT MUST BE SOLD TO A RETAILER OF COMPLETE HOME PACKAGES OR KITS PURSUANT TO A VALID PURCHASE CONTRACT REFERENCING THE PARTICULAR HOME DESIGN PLAN OR BLUEPRINT, AND SIGNED BY A CUSTOMER NOT AFFILIATED WITH THE IMPORTER; D. SOFTWOOD LUMBER PRODUCTS ENTERED AS PART OF A SINGLE FAMILY HOME PACKAGE OR KIT, WHETHER IN A SINGLE ENTRY OR MULTIPLE ENTRIES ON MULTIPLE DAYS, WILL BE USED SOLELY FOR THE CONSTRUCTION OF THE SINGLE FAMILY HOME SPECIFIED BY THE HOME DESIGN MATCHING THE ENTRY. E. FOR EACH ENTRY, THE FOLLOWING DOCUMENTATION MUST BE RETAINED BY THE IMPORTER AND MADE AVAILABLE TO CBP UPON REQUEST: i. A COPY OF THE APPROPRIATE HOME DESIGN, PLAN, OR BLUEPRINT MATCHING THE ENTRY; ii. A PURCHASE CONTRACT FROM A RETAILER OF HOME KITS OR PACKAGES SIGNED BY A CUSTOMER NOT AFFILIATED WITH THE IMPORTER; iii. A LISTING OF INVENTORY OF ALL PARTS OF THE PACKAGE OR KIT BEING ENTERED THAT CONFORMS TO THE HOME DESIGN PACKAGE BEING ENTERED; iv. IN THE CASE OF MULTIPLE SHIPMENTS ON THE SAME CONTRACT, ALL ITEMS LISTED IN E(iii) WHICH ARE INCLUDED IN THE PRESENT SHIPMENT SHALL BE IDENTIFIED AS WELL. LUMBER PRODUCTS THAT CBP MAY CLASSIFY AS STRINGERS, RADIUS CUT BOX-SPRING-FRAME COMPONENTS, AND FENCE PICKETS, NOT CONFORMING TO THE ABOVE REQUIREMENTS, AS WELL AS TRUSS COMPONENTS, PALLET COMPONENTS, AND DOOR AND WINDOW FRAME PARTS, ARE COVERED UNDER THE SCOPE OF THIS ORDER AND MAY BE CLASSIFIED UNDER HTSUS SUBHEADINGS 4418.90.45.90, 4421.90.70.40, AND 4421.90.97.40. FINALLY, AS CLARIFIED THROUGHOUT THE COURSE OF THE INVESTIGATION, THE FOLLOWING PRODUCTS, PREVIOUSLY IDENTIFIED AS GROUP A, REMAIN OUTSIDE THE SCOPE OF THIS ORDER. THEY ARE: 1. TRUSSES AND TRUSS KITS, PROPERLY CLASSIFIED UNDER HTSUS 4418.90; 2. I-JOIST BEAMS; 3. ASSEMBLED BOX SPRING FRAMES; 4. PALLETS AND PALLET KITS, PROPERLY CLASSIFIED UNDER HTSUS 4415.20; 5. GARAGE DOORS; 6. EDGE-GLUED WOOD, PROPERLY CLASSIFIED UNDER HTSUS 4421.90.98.40; 7. PROPERLY CLASSIFIED COMPLETE DOOR FRAMES; 8. PROPERLY CLASSIFIED COMPLETE WINDOW FRAMES; 9. PROPERLY CLASSIFIED FURNITURE. IN ADDITION, THIS SCOPE LANGUAGE WAS FURTHER CLARIFIED TO SPECIFY THAT ALL SOFTWOOD LUMBER PRODUCTS ENTERED FROM CANADA CLAIMING NON-SUBJECT STATUS BASED ON U.S. COUNTRY OF ORIGIN WILL BE TREATED AS NON-SUBJECT U.S.-ORIGIN MERCHANDISE UNDER THE COUNTERVAILING DUTY ORDER, PROVIDED THAT THESE SOFTWOOD LUMBER PRODUCTS MEET THE FOLLOWING CONDITION: UPON ENTRY, THE IMPORTER, EXPORTER, CANADIAN PROCESSOR AND/OR ORIGINAL U.S. PRODUCER ESTABLISH TO CBP'S SATISFACTION THAT THE SOFTWOOD LUMBER ENTERED AND DOCUMENTED AS U.S.-ORIGIN SOFTWOOD LUMBER WAS FIRST PRODUCED IN THE UNITED STATES AS A LUMBER PRODUCT SATISFYING THE PHYSICAL PARAMETERS OF THE SOFTWOOD LUMBER SCOPE. (SEE SCOPE CLARIFICATION MESSAGE # 3034202, DATED FEBRUARY 3, 2003, TO CBP REGARDING TREATMENT OF U.S. ORIGIN LUMBER ON FILE IN THE CRU.) THE PRESUMPTION OF NON-SUBJECT STATUS CAN, HOWEVER, BE REBUTTED BY EVIDENCE DEMONSTRATING THAT THE MERCHANDISE WAS SUBSTANTIALLY TRANSFORMED IN CANADA. FINALLY, CERTAIN SOFTWOOD LUMBER PRODUCTS FROM THE MARITIME PROVINCES ARE EXEMPT FROM THIS COUNTERVAILING DUTY ORDER. THIS EXEMPTION, HOWEVER, DOES NOT APPLY TO SOFTWOOD LUMBER PRODUCTS PRODUCED IN THE MARITIME PROVINCES FROM CROWN TIMBER HARVESTED IN ANY OTHER PROVINCE AND APPLIES ONLY TO ENTRIES OF SOFTWOOD LUMBER PRODUCTS FROM CANADA WHICH ARE ACCOMPANIED BY AN ORIGINAL CERTIFICATE OF ORIGIN ISSUED BY THE MARITIME LUMBER BUREAU (MLB). 3. AS A RESULT OF COMMERCE'S REVIEW, THE CASH DEPOSIT RATE HAS BEEN REVISED FOR A CERTAIN PRODUCER/EXPORTER. THERE IS NO LONGER AN OPTION TO POST A BOND. THEREFORE, FOR ALL SHIPMENTS OF CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA, PRODUCED AND EXPORTED BY THE PRODUCER/EXPORTER LISTED BELOW, AND ENTERED OR WITHDRAWN FROM WAREHOUSE FOR CONSUMPTION ON OR AFTER SEPTEMBER 28, 2005 (70 FR 56640) THE REQUIRED CASH DEPOSIT HAS BEEN REVISED AS FOLLOWS: PRODUCER/EXPORTER CUSTOMS ID CASH DEPOSIT RATE SEED TIMBER CO. LTD. C-122-839-080 2.22 PERCENT 4. THESE CASH DEPOSIT REQUIREMENTS WILL REMAIN IN EFFECT UNTIL PUBLICATION OF THE FINAL RESULTS FOR THE NEXT ADMINISTRATIVE REVIEW. DO NOT LIQUIDATE ANY ENTRIES COVERED BY THIS REVIEW UNTIL YOU HAVE RECEIVED LIQUIDATION INSTRUCTIONS. 5. IF THERE ARE ANY QUESTIONS REGARDING THIS MATTER BY U.S. CUSTOMS AND BORDER PROTECTION (CBP) OFFICERS, THE IMPORTING PUBLIC AND INTERESTED PARTIES, CONTACT DAVINA HASHIMI OR RON TRENTHAM AT THE OFFICE OF AD/CVD OPERATIONS, IMPORT ADMINISTRATION, INTERNATIONAL TRADE ADMINISTRATION, U.S. DEPARTMENT OF COMMERCE, (202) 482-0984 OR (202) 482-3577, RESPECTIVELY (GENERATED BY G2O3:KJ). 6. THERE ARE NO RESTRICTIONS ON THE RELEASE OF THIS INFORMATION. CATHY SAUCEDA

Frequently asked questions

What is CSMS 5297202?

CSMS 5297202 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin titled "CASH DEPOSIT INSTRUCTIONS FOR CERTAIN SOFTWOOD LUMBER PRODUCTS FROM CANADA PRODUCED AND EXPORTED BY SEED TIMBER CO. LTD. (C-122-839-080)". CSMS bulletins are the operational instructions CBP issues to brokers, importers, and ACE filers covering rate changes, system updates, scope guidance, and other day-to-day customs-operations changes.

When was CSMS 5297202 published?

CBP published CSMS 5297202 on October 24, 2005. The bulletin's instructions are typically operative as of the publication date unless the body specifies a different effective date.

Which AD/CVD cases does CSMS 5297202 affect?

CSMS 5297202 references 1 AD/CVD case (C-122-839). The links on this page take you to each linked order with its current scope, rates, and history.

Is the CBP CSMS the legally binding instruction?

Learn more

Tandom guides relevant to CBP CSMS messages

Trade compliance APIs in broker workflows

Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.

Open resource

Find the right manufacturer or exporter rate in an AD/CVD order

Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.