Certain Softwood Lumber Products

are softwood lumber, flooring and siding (softwood lumber products). Softwood lumber products include all products classified under headings 4407.1000, 4409.1010, 4409.1090, and 4409.1020, respectively, of the Harmonized Tariff Schedule of the United States (HTSUS), and any softwood lumber, flooring and siding described below. These softwood lumber products include: (1) Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding six millimeters; (2) Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed; (3) Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or finger-jointed; and (4) Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed. Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise subject to this order is dispositive. As specifically stated in the Issues and Decision Memorandum accompanying the Notice of Final Determination of Sales at Less Than Fair Value: Certain Softwood Lumber Products from Canada, 67 FR 15539 (April 2, 2002) (See comment 53, item D, page 116, and comment 57, item B-7, page 126), available at WWW.IA.ITA.DOC.GOV, drilled and notched lumber and angle cut lumber are covered by the scope of this order. The following softwood lumber products are excluded from the scope of this order provided they meet the specified requirements detailed below: (1) Stringers (pallet components used for runners): if they have at least two notches on the side, positioned at equal distance from the center, to properly accommodate forklift blades, properly classified under HTSUS 4421.90.98.40. (2) Box-spring frame kits: if they contain the following wooden pieces--two side rails, two end (or top) rails and varying numbers of slats. The side rails and the end rails should be radius-cut at both ends. The kits should be individually packaged, they should contain the exact number of wooden components needed to make a particular box spring frame, with no further processing required. None of the components exceeds 1'' in actual thickness or 83'' in length. (3) Radius-cut box-spring-frame components, not exceeding 1'' in actual thickness or 83'' in length, ready for assembly without further processing. The radius cuts must be present on both ends of the boards and must be [[Page 36071]] substantial cuts so as to completely round one corner. (4) Fence pickets requiring no further processing and properly classified under HTSUS heading 4421.90.70, 1'' or less in actual thickness, up to 8'' wide, 6' or less in length, and have finials or decorative cuttings that clearly identify them as fence pickets. In the case of dog-eared fence pickets, the corners of the boards should be cut off so as to remove pieces of wood in the shape of isosceles right angle triangles with sides measuring \3/4\ inch or more. (5) U.S. origin lumber shipped to Canada for minor processing and imported into the United States, is excluded from the scope of this order if the following conditions are met: 1) the processing occurring in Canada is limited to kiln-drying, planing to create smooth-to-size board, and sanding, and 2) if the importer establishes to Customs' satisfaction that the lumber is of U.S. origin. (6) Softwood lumber products contained in single family home packages or kits,\1\ regardless of tariff classification, are excluded from the scope of this order if the importer certifies to items 6 A, B, C, D, and requirement 6 E is met: --------------------------------------------------------------------------- \1\ To ensure administrability, we clarified the language of exclusion number 6 to require an importer certification and to permit single or multiple entries on multiple days as well as instructing importers to retain and make available for inspection specific documentation in support of each entry. --------------------------------------------------------------------------- A. The imported home package or kit constitutes a full package of the number of wooden pieces specified in the plan, design or blueprint necessary to produce a home of at least 700 square feet produced to a specified plan, design or blueprint; B. The package or kit must contain all necessary internal and external doors and windows, nails, screws, glue, sub floor, sheathing, beams, posts, connectors, contract decking, trim, drywall and roof shingles specified in the plan, design or blueprint; C. Prior to importation, the package or kit must be sold to a retailer of complete home packages or kits pursuant to a valid purchase contract referencing the particular home design plan or blueprint, and signed by a customer not affiliated with the importer; D. Softwood lumber products entered as part of a single family home package or kit, whether in a single entry or multiple entries on multiple days, will be used solely for the construction of the single family home specified by the home design matching the entry. E. For each entry, the following documentation must be retained by the importer and made available to the U.S. Customs Service upon request: i. A copy of the appropriate home design, plan, or blueprint matching the entry; ii. A purchase contract from a retailer of home kits or packages signed by a customer not affiliated with the importer; iii. A listing of inventory of all parts of the package or kit being entered that conforms to the home design package being entered; iv. In the case of multiple shipments on the same contract, all items listed in E(iii) which are included in the present shipment shall be identified as well. Lumber products that the Customs Service may classify as stringers, radius cut box-spring-frame components, and fence pickets, not conforming to the above requirements, as well as truss components, pallet components, and door and window frame parts, are covered under the scope of this order and may be classified under HTSUS subheadings 4418.90.45.90 , 4421.90.70.40, and 4421.90.97.40. Finally, as clarified throughout the course of the investigation, the following products, previously identified as Group A, remain outside the scope of this order. They are: 1. Trusses and truss kits, properly classified under HTSUS 4418.90; 2. I-joist beams; 3. Assembled box spring frames; 4. Pallets and pallet kits, properly classified under HTSUS 4415.20; 5. Garage doors; 6. Edge-glued wood, properly classified under HTSUS item 4421.90.98.40; 7. Properly classified complete door frames; 8. Properly classified complete window frames; 9. Properly classified furniture.