Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules from Cambodia, Malaysia, Thailand, and Vietnam; Inv. No. 701-TA-722-725 and 731-TA-1690-1693 (Final)

=== C–552–842 - Vietnam CVD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === USITC Scheduling === 1191Federal Register / Vol. 90, No. 4 / Tuesday, January 7, 2025 / Notices announced in the Federal Register upon completion of these assessments. Mark A. Foust, Regional Director, Interior Region 2—South Atlantic-Gulf. [FR Doc. 2025–00114 Filed 1–6–25; 8:45 am] BILLING CODE 4312–52–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–722–725 and 731–TA–1690–1693 (Final)] Crystalline Silicon Photovoltaic Products (Solar Panels) From Cambodia, Malaysia, Thailand, and Vietnam; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701–TA–722–725 and 731–TA–1690– 1693 (Final) pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of crystalline silicon photovoltaic products (solar panels) from Cambodia, Malaysia, Thailand, and Vietnam, provided for in statistical reporting numbers 8541.42.0010 and 8541.43.0010 of the Harmonized Tariff Schedule of the United States. Crystalline silicon photovoltaic cells, whether or not assemabled into modules, may also be imported under subheadings 8501.71, 8501.72, and 8501.80 and statistical reporting number 8507.20.8010, preliminarily determined by the Department of Commerce (‘‘Commerce’’) to be subsidized and sold at less-than-fair-value. DATES : December 4, 2024. FOR FURTHER INFORMATION CONTACT : Julie Duffy ((202) 708–2579), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these investigations may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Scope.—For purposes of these investigations, Commerce has defined the subject merchandise as ‘‘The merchandise covered by these investigations is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials. These investigations cover crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell. Merchandise under consideration may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, modules, laminates, panels, buildingintegrated modules, building- integrated panels, or other finished goods kits. Such parts that otherwise meet the definition of merchandise under consideration are included in the scope of the investigations. Excluded from the scope of the investigations are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS). Also excluded from the scope of the investigations are crystalline silicon photovoltaic cells, not exceeding 10,000 mm 2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cell. Where more than one cell is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all cells that are integrated into the consumer good. Additionally, excluded from the scope of the investigations are panels with surface area from 3,450 mm 2 to 33,782 mm 2 with one black wire and one red wire (each of type 22 AWG or 24 AWG not more than 206 mm in length when measured from panel extrusion), and not exceeding 2.9 volts, 1.1 amps, and 3.19 watts. For the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports. Also excluded from the scope of the investigations are: 1. Off grid CSPV panels in rigid form with a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include a permanently connected wire that terminates in either an 8 mm male barrel connector, or a two-port rectangular connector with two pins in square housings of different colors; (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell; and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features, and foam for transport); and 2. Off grid CSPV panels without a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell; and (E) each panel is (1) permanently integrated into a consumer good; (2) encased in a laminated material without stitching, or (3) has all of the following characteristics: (i) the panel is encased in sewn fabric with visible stitching, (ii) includes a mesh zippered storage pocket, and (iii) includes a permanently attached wire that terminates in a female USB–A connector. In addition, the following CSPV panels are excluded from the scope of the investigations: off-grid CSPV panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off- grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 80 watts per panel; (B) a surface area of less than 5,000 square centimeters (cm 2) per panel; (C) do not include a built-in inverter; (D) do not have a frame around the edges of the panel; (E) include a clear glass back panel; and (F) must include a permanently connected wire that VerDate Sep<11>2014 18:44 Jan 06, 2025 Jkt 265001 PO 00000 Frm 00113 Fmt 4703 Sfmt 4703 E:\FR\FM\07JAN1.SGM 07JAN1 ddrumheller on DSK120RN23PROD with NOTICES1 1192 Federal Register / Vol. 90, No. 4 / Tuesday, January 7, 2025 / Notices terminates in a twoport rectangular connector. Additionally excluded from the scope of these investigations are off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (1) a total power output of 200 watts or less per panel; (2) a maximum surface area of 16,000 cm2 per panel; (3) no built-in inverter; (4) an integrated handle or a handle attached to the package for ease of carry; (5) one or more integrated kickstands for easy installation or angle adjustment; and (6) a wire of not less than 3 meters either permanently connected or attached to the package that terminates in an 8 mm diameter male barrel connector. Also excluded from the scope of these investigations are off-grid crystalline silicon photovoltaic panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off-grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 180 watts per panel at 155 degrees Celsius; (B) a surface area of less than 16,000 square centimeters (cm2) per panel; (C) include a keep-out area of approximately 1,200 cm2 around the edges of the panel that does not contain solar cells; (D) do not include a built-in inverter; (E) do not have a frame around the edges of the panel; (F) include a clear glass back panel; (G) must include a permanently connected wire that terminates in a two- port rounded rectangular, sealed connector; (H) include a thermistor installed into the permanently connected wire before the twoport connector; and (I) include exposed positive and negative terminals at opposite ends of the panel, not enclosed in a junction box. Further excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 16,000 cm2 per panel, (C) no built-in inverter, (D) an integrated handle or a handle attached to the package for ease of carry, (E) one or more integrated kickstands for easy installation or angle adjustment, and (F) a wire either permanently connected or attached to the package terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure. Also excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Small off-grid panels with glass cover, with the following characteristics: (A) surface area from 3,450 mm2 to 33,782 mm2, (B) with one black wire and one red wire (each of type 22AWG or 28 AWG not more than 350 mm in length when measured from panel extrusion), (C) not exceeding 10 volts, (D) not exceeding 1.1 amps, (E) not exceeding 6 watts, and (F) for the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports. Additionally excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 175 watts or less per panel, (B) a maximum surface area of 9,000 cm2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure; (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Off grid CSPV panels without a glass cover, with the following characteristics, (A) a total power output of 220 watts or less per panel, (B) a maximum surface area of 16,000 cm2 per panel, (C) do not include a built-in inverter, (D) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (E) each panel is encased in a laminated material without stitching. Also excluded from the scope of these investigations are off-grid CSPV panels in rigid form, with or without a glass cover, permanently attached to an aluminum extrusion that is an integral component of an automation device that controls natural light, whether or not assembled into a fully completed automation device that controls natural light, with the following characteristics: 1. a total power output of 20 watts or less per panel; 2. a maximum surface area of 1,000 cm2 per panel; 3. does not include a built-in inverter for powering third party devices. Modules, laminates, and panels produced in a third-country from cells produced in a subject country are covered by the investigations; however, modules, laminates, and panels produced in a subject country from cells produced in a third-country are not covered by the investigations. Also excluded from the scope of these investigations are all products covered by the scope of the antidumping and countervailing duty orders on Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People’s Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 77 FR 73018 (December 7, 2012); and Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People’s Republic of China: Countervailing Duty Order, 77 FR 73017 (December 7, 2012). Merchandise covered by the investigations is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 8541.42.0010 and 8541.43.0010. Imports of the subject VerDate Sep<11>2014 18:44 Jan 06, 2025 Jkt 265001 PO 00000 Frm 00114 Fmt 4703 Sfmt 4703 E:\FR\FM\07JAN1.SGM 07JAN1 ddrumheller on DSK120RN23PROD with NOTICES1 1193Federal Register / Vol. 90, No. 4 / Tuesday, January 7, 2025 / Notices merchandise may enter under HTSUS subheadings 8501.71.0000, 8501.72.1000, 8501.72.2000, 8501.72.3000, 8501.72.9000, 8501.80.1000, 8501.80.2000, 8501.80.3000, 8501.80.9000, 8507.20.8010, 8507.20.8031, 8507.20.8041, 8507.20.8061, and 8507.20.8091. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of the investigations is dispositive. Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by Commerce that certain benefits which constitute subsidies within the meaning of § 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in Cambodia, Malaysia, Thailand, and Vietnam of crystalline silicon photovoltaic products (solar panels), and that such products are being sold in the United States at less than fair value within the meaning of § 733 of the Act (19 U.S.C. 1673b). The investigations were requested in petitions filed on on April 24, 2024, by the American Alliance for Solar Manufacturing Trade Committee. For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207). Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11 of the Commission’s rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations. Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on April 1, 2025, and a public version will be issued thereafter, pursuant to § 207.22 of the Commission’s rules. Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on Tuesday, April 15, 2025. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before Wednesday, April 9, 2025. Any requests to appear as a witness via videoconference must be included with your request to appear. Requests to appear via videoconference must include a statement explaining why the witness cannot appear in person; the Chairman, or other person designated to conduct the investigation, may in their discretion for good cause shown, grant such a request. Requests to appear as remote witness due to illness or a positive COVID–19 test result may be submitted by 3pm the business day prior to the hearing. Further information about participation in the hearing will be posted on the Commission’s website at https://www.usitc.gov/calendarpad/ calendar.html. A nonparty who has testimony that may aid the Commission’s deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference, if deemed necessary, to be held at 9:30 a.m. on Friday, April 11, 2025. Parties shall file and serve written testimony and presentation slides in connection with their presentation at the hearing by no later than noon on Monday, April 14, 2025. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission’s rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing. Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of § 207.23 of the Commission’s rules; the deadline for filing is April 8, 2025. Parties shall also file written testimony in connection with their presentation at the hearing, and posthearing briefs, which must conform with the provisions of § 207.25 of the Commission’s rules. The deadline for filing posthearing briefs is April 22, 2025. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before April 22, 2025. On May 13, 2025, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before May 15, 2025, but such final comments must not contain new factual information and must otherwise comply with § 207.30 of the Commission’s rules. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Additional written submissions to the Commission, including requests pursuant to § 201.12 of the Commission’s rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff. In accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the VerDate Sep<11>2014 18:44 Jan 06, 2025 Jkt 265001 PO 00000 Frm 00115 Fmt 4703 Sfmt 4703 E:\FR\FM\07JAN1.SGM 07JAN1 ddrumheller on DSK120RN23PROD with NOTICES1 1194 Federal Register / Vol. 90, No. 4 / Tuesday, January 7, 2025 / Notices 1 Handbook for Electronic Filing Procedures: https://www.usitc.gov/documents/handbook_on_ filing_procedures.pdf. investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.21 of the Commission’s rules. By order of the Commission. Issued: December 20, 2024. Sharon Bellamy, Supervisory Hearings and Information Officer. [FR Doc. 2025–00001 Filed 1–6–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Shapewear Garments and Components Thereof, DN 3799; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant’s filing pursuant to the Commission’s Rules of Practice and Procedure. FOR FURTHER INFORMATION CONTACT : Lisa R. Barton, Secretary to the Commission, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 205–2000. The public version of the complaint can be accessed on the Commission’s Electronic Document Information System (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at United States International Trade Commission (USITC) at https://www.usitc.gov . The public record for this investigation may be viewed on the Commission’s Electronic Document Information System (EDIS) at https://edis.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission has received a complaint and a submission pursuant to § 210.8(b) of the Commission’s Rules of Practice and Procedure filed on behalf of Spanx, LLC on December 31, 2024. The complaint alleges violations of section 337 of the Tariff Act of 1930 (19 U.S.C. 1337) in the importation into the United States, the sale for importation, and the sale within the United States after importation of certain shapewear garments and components thereof. The complaint names as respondents: Honeylove Sculptwear, Inc. of Los Angeles, CA; Guangzhoushi Chiping Dianzi Maoyi Co. Ltd. of China; Daerwene Inc. of Boulder, CO; Guangzhoushi Cedong Shangmao Youxiangongsi of China; Bingrong Co., Ltd of China; and Dolce Vita Intimates LLC of Harrison, NJ. The complainant requests that the Commission issue a general exclusion order or, in the alternative, issue a limited exclusion order, cease and desist orders, and impose a bond upon respondents’ alleged infringing articles during the 60- day Presidential review period pursuant to 19 U.S.C. 1337(j). Proposed respondents, other interested parties, members of the public, and interested government agencies are invited to file comments on any public interest issues raised by the complaint or § 210.8(b) filing. Comments should address whether issuance of the relief specifically requested by the complainant in this investigation would affect the public health and welfare in the United States, competitive conditions in the United States economy, the production of like or directly competitive articles in the United States, or United States consumers. In particular, the Commission is interested in comments that: (i) explain how the articles potentially subject to the requested remedial orders are used in the United States; (ii) identify any public health, safety, or welfare concerns in the United States relating to the requested remedial orders; (iii) identify like or directly competitive articles that complainant, its licensees, or third parties make in the United States which could replace the subject articles if they were to be excluded; (iv) indicate whether complainant, complainant’s licensees, and/or third party suppliers have the capacity to replace the volume of articles potentially subject to the requested exclusion order and/or a cease and desist order within a commercially reasonable time; and (v) explain how the requested remedial orders would impact United States consumers. Written submissions on the public interest must be filed no later than by close of business, eight calendar days after the date of publication of this notice in the Federal Register. There will be further opportunities for comment on the public interest after the issuance of any final initial determination in this investigation. Any written submissions on other issues must also be filed by no later than the close of business, eight calendar days after publication of this notice in the Federal Register. Complainant may file replies to any written submissions no later than three calendar days after the date on which any initial submissions were due, notwithstanding § 201.14(a) of the Commission’s Rules of Practice and Procedure. No other submissions will be accepted, unless requested by the Commission. Any submissions and replies filed in response to this Notice are limited to five (5) pages in length, inclusive of attachments. Persons filing written submissions must file the original document electronically on or before the deadlines stated above. Submissions should refer to the docket number (‘‘Docket No. 3799’’) in a prominent place on the cover page and/or the first page. (See Handbook for Electronic Filing Procedures, Electronic Filing Procedures 1). Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov.) No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Persons with questions regarding filing should contact the Secretary at EDIS3Help@usitc.gov. Any person desiring to submit a document to the Commission in confidence must request confidential treatment. All such requests should be directed to the Secretary to the Commission and must include a full statement of the reasons why the Commission should grant such treatment. See 19 CFR 201.6. Documents for which confidential treatment by the Commission is properly sought will be treated accordingly. All information, including confidential business information and documents for which confidential treatment is properly sought, submitted to the Commission for VerDate Sep<11>2014 18:44 Jan 06, 2025 Jkt 265001 PO 00000 Frm 00116 Fmt 4703 Sfmt 4703 E:\FR\FM\07JAN1.SGM 07JAN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Scheduling (2) === 2023Federal Register / Vol. 90, No. 6 / Friday, January 10, 2025 / Notices INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–1203 (Rescission)] Certain Rolled-Edge Rigid Plastic Food Trays; Notice of Commission Determination to Institute a Rescission Proceeding and to Temporarily Suspend a Limited Exclusion Order AGENCY : International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission has determined to institute a rescission proceeding and to temporarily suspend enforcement of a limited exclusion order (‘‘LEO’’) issued in the underlying investigation. FOR FURTHER INFORMATION CONTACT : Robert Needham, Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 708–5468. Copies of non-confidential documents filed in connection with this investigation may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. SUPPLEMENTARY INFORMATION : On June 23, 2020, the Commission instituted this investigation based on a complaint filed on behalf of Clearly Clean Products, LLC of South Windsor, Connecticut, and Converter Manufacturing, LLC of Orwigsburg, Pennsylvania (together, ‘‘Complainants’’). 85 FR 37689–90 (Jun. 23, 2020). The complaint alleged violations of section 337 of the Tariff Act of 1930, as amended, 19 U.S.C. 1337, based upon the importation into the United States, the sale for importation, and the sale within the United States after importation of certain rolled-edge rigid plastic food trays that infringe claim 9 of U.S. Patent No. 9,908,281 (‘‘the ’281 patent’’) and claims 1, 12, 20, and 21 of U.S. Patent No. 10,562,680 (‘‘the ’680 patent’’). Id. at 37689–90. The complaint also alleged that a domestic industry exists. Id. at 37689. The Commission’s notice of investigation names as respondents Eco Food Pak (USA), Inc. of Chino, California (‘‘Eco Food Pak’’), and Ningbo Linhua Plastic Co., Ltd. of Xiwu, China (‘‘Ningbo Linhua Plastic’’). Id. at 37690. The Office of Unfair Import Investigations participated in this investigation. Id. The investigation was terminated with respect to Eco Food Pak based on the entry of a consent order. Order No. 6 (Oct. 1, 2020), unreviewed by Comm’n Notice (Oct. 20, 2020). On October 6, 2020, the Commission found Ningbo Linhua Plastic in default for failing to respond to the complaint, the notice of investigation, and an order to show cause why it should not be found in default. Order No. 7 (Oct. 6, 2020), unreviewed by Comm’n Notice (Oct. 20, 2020). On February 25, 2021, the Commission issued a LEO against Ningbo Linhua Plastic with respect to claims claim 9 of the ’281 patent and claims 1, 12, 20, and 21 of the ’680 patent, and terminated the investigation. On December 4, 2024, Ningbo Linhua Plastic filed a petition to rescind the LEO because the subject patent claims were found unpatentable by the United States Patent and Trademark Office’s (‘‘USPTO’’) Patent Trial and Appeal Board (‘‘PTAB’’). Ningbo Linhua Plastic provided the PTAB’s final written decisions that found, inter alia, that claim 9 of the ’281 patent and claims 1, 12, 20, and 21 of the ’680 patent are unpatentable, as well as the U.S. Court of Appeals for the Federal Circuit’s affirmances of those final written decisions and denials of en banc review. Ningbo Linhua Plastic asserts that the unpatentability of the patent claims in the limited exclusion order is now final and unappealable, and constitutes a changed circumstance that warrants recission of the limited exclusion order pursuant to 35 U.S.C. 1337(k)(1) and 19 CFR 210.76. On December 13, 2024, Complainants filed a response opposing the rescission of the LEO. Complainants argue that patent claims are valid until the USPTO cancels the claims, which cannot occur until after the time of filing for a writ of certiorari expires or the completion of a U.S. Supreme Court appeal. Complainants state that Converter Manufacturing LLC intends to seek a writ of certiorari for U.S. Supreme Court review of the appeal prior to the February 10, 2025 deadline. Having reviewed Ningbo Linhua Plastic’s petition seeking to rescind the LEO and Complainants’ response, the Commission has determined to institute a recission proceeding. Based on the Federal Circuit’s summary affirmance of the PTAB’s final written decisions regarding the invalidity of the LEO’s subject claims and its denial of Complainant’s petition for rehearing en banc, the Commission finds that the conditions which led to the LEO no longer exist, and are unlikely to be reinstated, under 19 U.S.C. 1337(k)(1) and (2)(B). The Commission also finds that the requirements of Commission Rule 210.76(a) (19 CFR 210.76(a)) are satisfied. Because the LEO’s patent claims are still subject to U.S. Supreme Court appeal, the Commission has determined to grant partial relief and to temporarily suspend enforcement of the LEO pending the cancellation of its subject patent claims or the reversal or vacatur of the Federal Circuit’s decisions. The Commission Order issued concurrently herewith temporarily suspends enforcement of the LEO. The Commission has determined that no other actions are necessary at this time, so the rescission proceeding remains pending, and the parties are instructed to keep the Commission apprised of any significant developments on appeal or at the USPTO. The Commission vote for this determination took place on January 3, 2025. The authority for the Commission’s determination is contained in section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: January 3, 2025. Lisa Barton, Secretary to the Commission. [FR Doc. 2025–00322 Filed 1–8–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–722–725 and 731–TA–1690–1693 (Final)] Crystalline Silicon Photovoltaic Products (Solar Panels) From Cambodia, Malaysia, Thailand, and Vietnam; Corrected Notice of Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701–TA–722–725 and 731–TA–1690– 1693 (Final) pursuant to the Tariff Act VerDate Sep<11>2014 17:28 Jan 08, 2025 Jkt 265001 PO 00000 Frm 00087 Fmt 4703 Sfmt 4703 E:\FR\FM\10JAN1.SGM 10JAN1 khammond on DSK9W7S144PROD with NOTICES 2024 Federal Register / Vol. 90, No. 6 / Friday, January 10, 2025 / Notices of 1930 (‘‘the Act’’) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of crystalline silicon photovoltaic products (solar panels) from Cambodia, Malaysia, Thailand, and Vietnam, provided for in statistical reporting numbers 8541.42.0010 and 8541.43.0010 of the Harmonized Tariff Schedule of the United States. Crystalline silicon photovoltaic cells, whether or not assemabled into modules, may also be imported under subheadings 8501.71, 8501.72, and 8501.80 and statistical reporting number 8507.20.8010, preliminarily determined by the Department of Commerce (‘‘Commerce’’) to be subsidized and sold at less-than-fair-value. DATES : December 4, 2024. FOR FURTHER INFORMATION CONTACT : Julie Duffy ((202) 708–2579), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these investigations may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Scope.—For purposes of these investigations, Commerce has defined the subject merchandise as ‘‘The merchandise covered by these investigations is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials. These investigations cover crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell. Merchandise under consideration may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, modules, laminates, panels, buildingintegrated modules, building- integrated panels, or other finished goods kits. Such parts that otherwise meet the definition of merchandise under consideration are included in the scope of the investigations. Excluded from the scope of the investigations are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS). Also excluded from the scope of the investigations are crystalline silicon photovoltaic cells, not exceeding 10,000 mm2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cell. Where more than one cell is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all cells that are integrated into the consumer good. Additionally, excluded from the scope of the investigations are panels with surface area from 3,450 mm2 to 33,782 mm2 with one black wire and one red wire (each of type 22 AWG or 24 AWG not more than 206 mm in length when measured from panel extrusion), and not exceeding 2.9 volts, 1.1 amps, and 3.19 watts. For the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports. Also excluded from the scope of the investigations are: 1. Off grid CSPV panels in rigid form with a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm2 per panel; (C) do not include a built-in inverter; (D) must include a permanently connected wire that terminates in either an 8 mm male barrel connector, or a two-port rectangular connector with two pins in square housings of different colors; (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell; and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features, and foam for transport); and 2. Off grid CSPV panels without a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm2 per panel; (C) do not include a built-in inverter; (D) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell; and (E) each panel is (1) permanently integrated into a consumer good; (2) encased in a laminated material without stitching, or (3) has all of the following characteristics: (i) the panel is encased in sewn fabric with visible stitching, (ii) includes a mesh zippered storage pocket, and (iii) includes a permanently attached wire that terminates in a female USB–A connector. In addition, the following CSPV panels are excluded from the scope of the investigations: off-grid CSPV panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off- grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 80 watts per panel; (B) a surface area of less than 5,000 square centimeters (cm2) per panel; (C) do not include a built-in inverter; (D) do not have a frame around the edges of the panel; (E) include a clear glass back panel; and (F) must include a permanently connected wire that terminates in a twoport rectangular connector. Additionally excluded from the scope of these investigations are off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (1) a total power output of 200 watts or less per panel; (2) a maximum surface area of 16,000 cm2 per panel; (3) no built-in inverter; (4) an integrated handle or a handle attached to the package for ease of carry; (5) one or more integrated kickstands for easy installation or angle adjustment; and (6) a wire of not less than 3 meters either permanently connected or attached to the package that terminates in an 8 mm diameter male barrel connector. Also excluded from the scope of these investigations are off-grid crystalline silicon photovoltaic panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off-grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 180 watts per panel at 155 degrees Celsius; (B) a surface area of less than 16,000 square VerDate Sep<11>2014 17:28 Jan 08, 2025 Jkt 265001 PO 00000 Frm 00088 Fmt 4703 Sfmt 4703 E:\FR\FM\10JAN1.SGM 10JAN1 khammond on DSK9W7S144PROD with NOTICES 2025Federal Register / Vol. 90, No. 6 / Friday, January 10, 2025 / Notices centimeters (cm2) per panel; (C) include a keep-out area of approximately 1,200 cm2 around the edges of the panel that does not contain solar cells; (D) do not include a built-in inverter; (E) do not have a frame around the edges of the panel; (F) include a clear glass back panel; (G) must include a permanently connected wire that terminates in a two- port rounded rectangular, sealed connector; (H) include a thermistor installed into the permanently connected wire before the twoport connector; and (I) include exposed positive and negative terminals at opposite ends of the panel, not enclosed in a junction box. Further excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 16,000 cm2 per panel, (C) no built-in inverter, (D) an integrated handle or a handle attached to the package for ease of carry, (E) one or more integrated kickstands for easy installation or angle adjustment, and (F) a wire either permanently connected or attached to the package terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure. Also excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Small off-grid panels with glass cover, with the following characteristics: (A) surface area from 3,450 mm2 to 33,782 mm2, (B) with one black wire and one red wire (each of type 22 AWG or 28 AWG not more than 350 mm in length when measured from panel extrusion), (C) not exceeding 10 volts, (D) not exceeding 1.1 amps, (E) not exceeding 6 watts, and (F) for the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports. Additionally excluded from the scope of the investigations are: 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 175 watts or less per panel, (B) a maximum surface area of 9,000 cm2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure; (E) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and 2. Off grid CSPV panels without a glass cover, with the following characteristics, (A) a total power output of 220 watts or less per panel, (B) a maximum surface area of 16,000 cm2 per panel, (C) do not include a built-in inverter, (D) must include visible parallel grid collector metallic wire lines every 1–4 millimeters across each solar cell, and (E) each panel is encased in a laminated material without stitching. Also excluded from the scope of these investigations are off-grid CSPV panels in rigid form, with or without a glass cover, permanently attached to an aluminum extrusion that is an integral component of an automation device that controls natural light, whether or not assembled into a fully completed automation device that controls natural light, with the following characteristics: 1. a total power output of 20 watts or less per panel; 2. a maximum surface area of 1,000 cm2 per panel; 3. does not include a built-in inverter for powering third party devices. Modules, laminates, and panels produced in a third-country from cells produced in a subject country are covered by the investigations; however, modules, laminates, and panels produced in a subject country from cells produced in a third-country are not covered by the investigations. Also excluded from the scope of these investigations are all products covered by the scope of the antidumping and countervailing duty orders on Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People’s Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 77 FR 73018 (December 7, 2012); and Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People’s Republic of China: Countervailing Duty Order, 77 FR 73017 (December 7, 2012). Merchandise covered by the investigations is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 8541.42.0010 and 8541.43.0010. Imports of the subject merchandise may enter under HTSUS subheadings 8501.71.0000, 8501.72.1000, 8501.72.2000, 8501.72.3000, 8501.72.9000, 8501.80.1000, 8501.80.2000, 8501.80.3000, 8501.80.9000, 8507.20.8010, 8507.20.8031, 8507.20.8041, 8507.20.8061, and 8507.20.8091. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of the investigations is dispositive. Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by Commerce that certain benefits which constitute subsidies within the meaning of § 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in Cambodia, Malaysia, Thailand, and Vietnam of crystalline silicon photovoltaic products (solar panels), and that such products are being sold in the United States at less than fair value within the meaning of § 733 of the Act (19 U.S.C. 1673b). The investigations VerDate Sep<11>2014 17:28 Jan 08, 2025 Jkt 265001 PO 00000 Frm 00089 Fmt 4703 Sfmt 4703 E:\FR\FM\10JAN1.SGM 10JAN1 khammond on DSK9W7S144PROD with NOTICES 2026 Federal Register / Vol. 90, No. 6 / Friday, January 10, 2025 / Notices were requested in petitions filed on on April 24, 2024, by the American Alliance for Solar Manufacturing Trade Committee. For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207). Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11 of the Commission’s rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations. Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on April 1, 2025, and a public version will be issued thereafter, pursuant to § 207.22 of the Commission’s rules. Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on Tuesday, April 15, 2025. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before Wednesday, April 9, 2025. Any requests to appear as a witness via videoconference must be included with your request to appear. Requests to appear via videoconference must include a statement explaining why the witness cannot appear in person; the Chairman, or other person designated to conduct the investigation, may in their discretion for good cause shown, grant such a request. Requests to appear as remote witness due to illness or a positive COVID–19 test result may be submitted by 3 p.m. the business day prior to the hearing. Further information about participation in the hearing will be posted on the Commission’s website at https://www.usitc.gov/calendarpad/ calendar.html. A nonparty who has testimony that may aid the Commission’s deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference, if deemed necessary, to be held at 9:30 a.m. on Friday, April 11, 2025. Parties shall file and serve written testimony and presentation slides in connection with their presentation at the hearing by no later than noon on Monday, April 14, 2025. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission’s rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing. Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of § 207.23 of the Commission’s rules; the deadline for filing is April 8, 2025. Parties shall also file written testimony in connection with their presentation at the hearing, and posthearing briefs, which must conform with the provisions of § 207.25 of the Commission’s rules. The deadline for filing posthearing briefs is April 22, 2025. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before April 22, 2025. On May 13, 2025, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before May 15, 2025, but such final comments must not contain new factual information and must otherwise comply with § 207.30 of the Commission’s rules. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Additional written submissions to the Commission, including requests pursuant to § 201.12 of the Commission’s rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff. In accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.21 of the Commission’s rules. By order of the Commission. Issued: January 6, 2025. Sharon Bellamy, Supervisory Hearings and Information Officer. [FR Doc. 2025–00383 Filed 1–8–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest AGENCY : International Trade Commission. VerDate Sep<11>2014 17:28 Jan 08, 2025 Jkt 265001 PO 00000 Frm 00090 Fmt 4703 Sfmt 4703 E:\FR\FM\10JAN1.SGM 10JAN1 khammond on DSK9W7S144PROD with NOTICES ──────────────────────────────────────────────────────────── === C–549–852 - Thailand CVD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === USITC Determination - Final === 25075Federal Register / Vol. 90, No. 113 / Friday, June 13, 2025 / Notices 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 2 CSPV products may also be imported under subheadings 8501.71, 8501.72, and 8501.80 and statistical reporting number 8507.20.8010. Mitigation Mitigation is included in the Final EIS for Cultural Resources, Water Resources, and Wildlife Resources. Mitigation for cultural resources was developed for potential effects to 20 National Register of Historic Places eligible historic properties and includes development of a Historic Properties Treatment Plan and Memorandum of Availability. Mitigation for Water Resources was developed for surface disturbance, fencing, and potential groundwater drawdown effects to spring sites and includes monitoring for triggers, and different mitigation types to reduce effects. Mitigation for wildlife was developed for potential effects to desert kangaroo rats, greater sage-grouse, and burrowing owls, and includes flushing burrows, use of the State of Nevada Conservation Credit System, and installation of artificial burrows. Based on the analyses contained in the Final EIS for the proposed Project, and after carefully considering input received from the public and cooperating agencies, the BLM has selected the Proposed Action as the BLM’s preferred alternative and the No Action Alternative as the environmentally preferred alternative. Comments on the Draft EIS received from the public and internal BLM review were considered and incorporated as appropriate into the Final EIS. Public comments resulted in the addition of clarifying text, but did not significantly change proposed decisions. (Authority: 43 CFR 46.415(c)) Samuel R. Burton, District Manager, Winnemucca District Office. [FR Doc. 2025–10525 Filed 6–12–25; 8:45 am] BILLING CODE 4331–21–P DEPARTMENT OF THE INTERIOR Bureau of Land Management [A2407–014–004–065516; #O2412–014–004– 047181.1] Public Meeting for the Missouri Basin Resource Advisory Council AGENCY : Bureau of Land Management, Interior. ACTION : Notice of public meeting. SUMMARY : In accordance with the Federal Land Policy and Management Act of 1976 and the Federal Advisory Committee Act of 1972, the U.S. Department of the Interior, Bureau of Land Management (BLM) Missouri Basin Resource Advisory Council (RAC) will meet as follows. DATE : The RAC will meet on July 15, 2025, from 8 a.m. to 4 p.m. Mountain Time (MT). ADDRESSES : The meeting will be held virtually using a web-based video- conferencing application. The meeting is open to the public. A public-comment period will be held from 11 a.m. to noon MT. Individuals who wish to attend must register with the person listed in the FOR FURTHER INFORMATION CONTACT section of this notice at least 7 business days prior to the meeting date. FOR FURTHER INFORMATION CONTACT : Mark Jacobsen, Missouri Basin RAC Coordinator, BLM Eastern Montana- Dakotas District, 111 Garryowen Road, Miles City, Montana 59301; telephone: 406–233–2831; email: mjacobse@ blm.gov. Persons in the United States who are deaf, deafblind, hard of hearing, or have a speech disability may dial 711 (TTY, TDD, or TeleBraille) to access telecommunications relay services. Individuals outside the United States should use the relay services offered within their country to make international calls to the point-of- contact in the United States. SUPPLEMENTARY INFORMATION : The 15- member council advises the Secretary of the Interior, through the BLM, on a variety of planning and management issues associated with public land management in Central and Eastern Montana, and North and South Dakota. Agenda topics will include North- Central Montana and Eastern Montana/ Dakotas District reports, Field Office reports, a public comment period, and other topics the RAC may wish to cover. A final agenda will be posted on the RAC’s web page at https:// www.blm.gov/get-involved/resource- advisory-council/near-you/montana- dakotas/missouri-basin-rac two weeks in advance of the meeting. Public Comment Procedures: The BLM welcomes comments from all interested parties. A public-comment period will be held from 11 a.m. to noon MT. Depending on the number of persons wishing to comment and time available, the time for individual oral comments may be limited. Written comments to the RAC can be emailed in advance of the meeting to the individual listed in the FOR FURTHER INFORMATION CONTACT section of this notice. All comments will be provided to the RAC. Please include ‘‘RAC Comment’’ in your submission. Before including your address, phone number, email address, or other personal identifying information in your comment, you should be aware that your entire comment—including your personal identifying information—may be made publicly available at any time. While you can ask us in your comment to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Requests for Accommodations: Please make requests in advance for sign language interpreter services, assistive listening devices, language translation services, or other reasonable accommodations. We ask that you contact the person listed in the FOR FURTHER INFORMATION CONTACT section of this notice at least 14 business days prior to the meeting to give the Department of the Interior sufficient time to process your request. All reasonable accommodation requests are managed on a case-by-case basis. (Authority: 43 CFR 1784.4–2). Wendy Warren, Eastern Montana/Dakotas District Manager and Missouri Basin RAC Designated Federal Officer. [FR Doc. 2025–10836 Filed 6–12–25; 8:45 am] BILLING CODE 4331–20–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–722–725 and 731–TA–1690–1693 (Final)] Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From Cambodia, Malaysia, Thailand, and Vietnam Determinations On the basis of the record 1 developed in the subject investigations, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that an industry in the United States is materially injured by reason of imports of crystalline silicon photovoltaic cells, whether or not assembled into modules (‘‘CSPV products’’), from Malaysia and Vietnam and that a U.S. industry is threatened with material injury by reason of imports of CSPV products from Cambodia and Thailand, provided for in statistical reporting numbers 8541.42.0010 and 8541.43.0010 of the Harmonized Tariff Schedule of the United States, 2 that have been found by the U.S. Department of Commerce (‘‘Commerce’’) to be sold in the United States at less than fair value (‘‘LTFV’’) VerDate Sep<11>2014 17:02 Jun 12, 2025 Jkt 265001 PO 00000 Frm 00059 Fmt 4703 Sfmt 4703 E:\FR\FM\13JNN1.SGM 13JNN1 khammond on DSK9W7S144PROD with NOTICES 25076 Federal Register / Vol. 90, No. 113 / Friday, June 13, 2025 / Notices 3 90 FR 17392, 90 FR 17406, 90 FR 173765, 90 FR 17384, 90 FR 17395, 90 FR 17380, 90 FR 17388, and 90 FR 17399 (April 25, 2025). 4 The Commission also finds that imports subject to Commerce’s affirmative critical circumstances determination are not likely to undermine seriously the remedial effect of the countervailing and antidumping duty orders on CSPV products from Vietnam. Because of its threat determination, no critical circumstances findings with regard to imports of this product from Thailand were reached. 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 2 90 FR 21741 May 21, 2025, and 90 FR 21746, May 21, 2025 and subsidized by the governments of Cambodia, Malaysia, Thailand, and Vietnam.3 4 Background The Commission instituted these investigations effective April 24, 2024, following receipt of petitions filed with the Commission and Commerce by the American Alliance for Solar Manufacturing Trade Committee. The final phase of the investigations was scheduled by the Commission following notification of preliminary determinations by Commerce that imports of CSPV products from Cambodia, Malaysia, Thailand and Vietnam were subsidized within the meaning of section 703(b) of the Act (19 U.S.C. 1671b(b)) and sold at LTFV within the meaning of 733(b) of the Act (19 U.S.C. 1673b(b)). Notice of the scheduling of the final phase of the Commission’s investigations and of a public hearing to be held in connection therewith was given by posting copies of the notice in the Office of the Secretary, U.S. International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register on December 30, 2024 and subsequently after (89 FR 106578, December 30, 2024; 90 FR 1191, January 7, 2025; and 90 FR 2023, January 10, 2025). The Commission conducted its hearing on April 15, 2025. All persons who requested the opportunity were permitted to participate. The Commission made these determinations pursuant to §§ 705(b) and 735(b) of the Act (19 U.S.C. 1671d(b) and 19 U.S.C. 1673d(b)). It completed and filed its determinations in these investigations on June 9, 2025. The views of the Commission are contained in USITC. Publication 5631 (June 20252), entitled Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Cambodia, Malaysia, Thailand, and Vietnam: Investigation Nos. 701–TA–722–725 and 1690–1693 (Final). By order of the Commission. Issued: June 9, 2025. Lisa Barton, Secretary to the Commission. [FR Doc. 2025–10744 Filed 6–12–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–611 and 731– TA–1428 (Review)] Aluminum Wire and Cable From China Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing and antidumping duty orders on aluminum wire and cable from China would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on November 1, 2024 (89 FR 87401) and determined on February 4, 2025, that it would conduct expedited reviews (90 FR 11181, March 4, 2025). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on June 9, 2025. The views of the Commission are contained in USITC Publication 5635 (June 2025), entitled Aluminum Wire and Cable from China: Investigation Nos. 701–TA–611 and 731–TA–1428 (Review). By order of the Commission. Issued: June 9, 2025. Lisa Barton, Secretary to the Commission. [FR Doc. 2025–10751 Filed 6–12–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–760–763 and 731–TA–1743–1746 (Preliminary)] Silicon Metal From Angola, Australia, Laos, Norway, and Thailand Determinations On the basis of the record 1 developed in the subject investigations, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that there is a reasonable indication that an industry in the United States is materially injured by reason of imports of silicon metal from Australia, Laos, and Norway, provided for in subheadings 2804.69.10 and 2804.69.50 of the Harmonized Tariff Schedule of the United States, that are alleged to be sold in the United States at less than fair value (‘‘LTFV’’) and subsidized by the governments of Australia, Laos, and Norway. The Commission also determines that there is a reasonable indication that a U.S. industry is threatened with material injury by reason of imports of silicon metal from Angola that are allegedly sold in the United States at LTFV and imports of silicon metal from Thailand that are allegedly subsidized by the government of Thailand. 2 Commencement of Final Phase Investigations Pursuant to section 207.18 of the Commission’s rules, the Commission also gives notice of the commencement of the final phase of its investigations. The Commission will issue a final phase notice of scheduling, which will be published in the Federal Register as provided in § 207.21 of the Commission’s rules, upon notice from the U.S. Department of Commerce (‘‘Commerce’’) of affirmative preliminary determinations in the investigations under §§ 703(b) or 733(b) of the Act, or, if the preliminary determinations are negative, upon notice of affirmative final determinations in those investigations under §§ 705(a) or 735(a) of the Act. Parties that filed entries of appearance in the preliminary phase of the investigations need not enter a separate appearance for the final phase of the investigations. Any other party may file an entry of appearance for the final phase of the investigations after VerDate Sep<11>2014 17:02 Jun 12, 2025 Jkt 265001 PO 00000 Frm 00060 Fmt 4703 Sfmt 4703 E:\FR\FM\13JNN1.SGM 13JNN1 khammond on DSK9W7S144PROD with NOTICES ──────────────────────────────────────────────────────────── === A–552–841 - Vietnam AD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === A–555–003 - Cambodia AD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === A–549–851 - Thailand AD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === C–555–004 - Cambodia CVD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === A–557–830 - Malaysia AD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help ──────────────────────────────────────────────────────────── === C–557–831 - Malaysia CVD === Federal Register :: Request Access { "imports": { "application": "/assets/application-cc464116.js", "@hotwired/turbo-rails": "/assets/turbo.min-86bf8853.js", "@hotwired/stimulus": "/assets/stimulus.min-7ea3d58b.js", "@hotwired/stimulus-loading": "/assets/stimulus-loading-25917588.js", "controllers/application": "/assets/controllers/application-e5a449db.js", "controllers/site_feedback_controller": "/assets/controllers/site_feedback_controller-a99fc93f.js", "controllers/unblock_controller": "/assets/controllers/unblock_controller-9520f896.js" } } import "application" Request Access Due to aggressive automated scraping of FederalRegister.gov and eCFR.gov, programmatic access to these sites is limited to access to our extensive developer APIs. Please visit FederalRegister.gov API documentation or eCFR.gov API documentation to learn more about how to access the API. Your request has been flagged as potentially automated. If you are human user receiving this message, please complete the CAPTCHA (bot test) below and click "Request Access". You may occassionally be asked to complete the CAPTCHA again, this is normal and part of our security measures. unblock#handleSubmit"> Request Access An official website of the United States government. If you experiencing issues with the CAPTCHA or want to request a wider IP range, you can use the "Site Help" button found in the lower, right of this page to make a request. × IP Access Help This contact form is only for IP Access help. Please do not provide confidential information or personal data. * Your Name * Email * How can we help you? Upload Attachment * I am requesting technical help. site-feedback#openModal" aria-label="Open site help form"> Site Help