Steel Racks from China; Inv. No. 701-TA-608 and 731-TA-1420 (Review)

=== Initiation === 62717Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices 9 See Scope Ruling Application; Annual Inquiry Service List; and Informational Sessions, 86 FR 53205 (September 27, 2021) (Procedural Guidance). 10 Id. 11 This segment has been combined with the ACCESS Segment Specific Information (SSI) field which will display the month in which the notice of the order or suspended investigation was published in the Federal Register, also known as the anniversary month. For example, for an order under case number A–000–000 that was published in the Federal Register in January, the relevant segment and SSI combination will appear in ACCESS as ‘‘AISL-January Anniversary.’’ Note that there will be only one annual inquiry service list segment per case number, and the anniversary month will be pre-populated in ACCESS. 12 See Procedural Guidance, 86 FR at 53206. 13 See Final Rule, 86 FR at 52335. 14 Id. Application; Annual Inquiry Service List; and Informational Sessions’’ in the Federal Register. 9 The Final Rule and Procedural Guidance provide that Commerce will maintain an annual inquiry service list for each order or suspended investigation, and any interested party submitting a scope ruling application or request for circumvention inquiry shall serve a copy of the application or request on the persons on the annual inquiry service list for that order, as well as any companion order covering the same merchandise from the same country of origin.10 In accordance with the Procedural Guidance, for orders published in the Federal Register before November 4, 2021, Commerce created an annual inquiry service list segment for each order and suspended investigation. Interested parties who wished to be added to the annual inquiry service list for an order submitted an entry of appearance to the annual inquiry service list segment for the order in ACCESS and, on November 4, 2021, Commerce finalized the initial annual inquiry service lists for each order and suspended investigation. Each annual inquiry service list has been saved as a public service list in ACCESS, under each case number, and under a specific segment type called ‘‘AISL-Annual Inquiry Service List.’’ 11 As mentioned in the Procedural Guidance, beginning in January 2022, Commerce will update these annual inquiry service lists on an annual basis when the Opportunity Notice for the anniversary month of the order or suspended investigation is published in the Federal Register.12 Accordingly, Commerce will update the annual inquiry service lists for the above-listed AD and CVD proceedings. All interested parties wishing to appear on the updated annual inquiry service list must take one of the two following actions: (1) new interested parties who did not previously submit an entry of appearance must submit a new entry of appearance at this time; (2) interested parties who were included in the preceding annual inquiry service list must submit an amended entry of appearance to be included in the next year’s annual inquiry service list. For these interested parties, Commerce will change the entry of appearance status from ‘‘Active’’ to ‘‘Needs Amendment’’ for the annual inquiry service lists corresponding to the above-listed proceedings. This will allow those interested parties to make any necessary amendments and resubmit their entries of appearance. If no amendments need to be made, the interested party should indicate in the area on the ACCESS form requesting an explanation for the amendment that it is resubmitting its entry of appearance for inclusion in the annual inquiry service list for the following year. As mentioned in the Final Rule,13 once the petitioners and foreign governments have submitted an entry of appearance for the first time, they will automatically be added to the updated annual inquiry service list each year. Interested parties have 30 days after the date of this notice to submit new or amended entries of appearance. Commerce will then finalize the annual inquiry service lists five business days thereafter. For ease of administration, please note that Commerce requests that law firms with more than one attorney representing interested parties in a proceeding designate a lead attorney to be included on the annual inquiry service list. Commerce may update an annual inquiry service list at any time as needed based on interested parties’ amendments to their entries of appearance to remove or otherwise modify their list of members and representatives, or to update contact information. Any changes or announcements pertaining to these procedures will be posted to the ACCESS website at https:// access.trade.gov. Special Instructions for Petitioners and Foreign Governments In the Final Rule, Commerce stated that, ‘‘after an initial request and placement on the annual inquiry service list, both petitioners and foreign governments will automatically be placed on the annual inquiry service list in the years that follow.’’ 14 Accordingly, as stated above and pursuant to 19 CFR 351.225(n)(3), the petitioners and foreign governments will not need to resubmit their entries of appearance each year to continue to be included on the annual inquiry service list. However, the petitioners and foreign governments are responsible for making amendments to their entries of appearance during the annual update to the annual inquiry service list in accordance with the procedures described above. This notice is not required by statute but is published as a service to the international trading community. Dated: July 24, 2024. Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2024–16998 Filed 7–31–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In accordance with the Tariff Act of 1930, as amended (the Act), the U.S. Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping and countervailing duty (AD/CVD) order(s) and suspended investigation(s) listed below. The U.S. International Trade Commission (ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable August 1, 2024. FOR FURTHER INFORMATION CONTACT : Commerce official identified in the Initiation of Review section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 62718 Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19; Extension of Effective Period, 85 FR 41363 (July 10, 2020). 2 See 19 CFR 351.218(d)(1)(iii). relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Act and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following antidumping and countervailing duty order(s) and suspended investigation(s): DOC case No. ITC case No. Country Product Commerce contact A–201–820 ........................ 731–TA–747 ...................... Mexico ............................... Fresh Tomatoes (5th Re- view). Jacqueline Arrowsmith, (202) 482–5255. A–570–088 ........................ 731–TA–1420 .................... China ................................. Steel Racks (1st Review) Thomas Martin, (202) 482–3936. A–570–090 ........................ 731–TA–1421 .................... China ................................. Steel Trailer Wheels (1st Review). Mary Kolberg, (202) 482– 1785. C–570–089 ........................ 701–TA–608 ...................... China ................................. Steel Racks (1st Review) Thomas Martin, (202) 482–3936. C–570–091 ........................ 701–TA–609 ...................... China ................................. Steel Trailer Wheels (1st Review). Mary Kolberg, (202) 482– 1785. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https://enforcement. trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in sections 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct from the ITC’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR 351 for definitions of terms and for other general information concerning AD and CVD proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: July 23, 2024. Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2024–16988 Filed 7–31–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–549–833] Citric Acid and Certain Citrate Salts From Thailand: Preliminary Results of Antidumping Duty Administrative Review; 2022–2023 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily determines that certain producers/ VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Institution === 62779Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices organizations; not-for-profit institutions; State, local or Tribal government; Federal government; standards-making bodies; universities. Total Estimated Number of Annual Respondents: 2,500. Total Estimated Number of Annual Responses: 4,500 (2,500 15-minute surveys; 1,500 15-minute follow-up surveys; 500 2-hour follow-up interviews). Estimated Completion Time per Response: Varied, dependent upon the data collection method used. The possible response time to complete a questionnaire may be 15 minutes or 2 hours to participate in an interview. Total Estimated Number of Annual Burden Hours: 2,000. Respondent’s Obligation: Voluntary. Frequency of Collection: The vast majority will be one-time data collection. It is possible that follow-up data collection (pre-/post-conditions) could occur if data are collected from respondents who are impacted by more than one hazard-related incident or a prolonged incident, but we expect this to be very rare. Total Estimated Annual Non-hour Burden Cost: None. An agency may not conduct or sponsor, nor is a person is required to respond to a collection of information unless it displays a currently valid OMB control number. The authority for this action is the PRA of 1995 (44 U.S.C. 3501 et seq.). Michael Grimm, Associate Director for Natural Hazards, USGS. [FR Doc. 2024–16985 Filed 7–31–24; 8:45 am] BILLING CODE 4338–11–P DEPARTMENT OF THE INTERIOR Bureau of Indian Affairs [245A2100DD/AAKC001030/ A0A501010.999900] Tribal Tourism Grant Program; Solicitation of Proposals AGENCY : Bureau of Indian Affairs, Interior. ACTION : Notice. SUMMARY : Through this notice, the Office of the Assistant Secretary— Indian Affairs, through the Office of Indian Economic Development (OIED), announces a forthcoming FY 2024 Tribal Tourism Grant Program (TTGP) Notice of Funding Opportunity (NOFO) for Tribal tourism projects. DATES : Proposals must be submitted to no later than 5 p.m. eastern time by the deadline indicated in the NOFO and posting on Grants.gov. ADDRESSES : Proposals must be submitted to https://www.Grants.gov. FOR FURTHER INFORMATION CONTACT : Mr. Dennis Wilson, Grant Management Specialist, Office of Indian Economic Development, telephone (505) 917– 3235; email: dennis.wilson@bia.gov. If you have questions regarding the application process, please contact Ms. Jo Ann Metcalfe, Grant Officer, telephone (410) 703–3390; email: jo.metcalfe@bia.gov. Individuals in the United States who are deaf, deafblind, hard of hearing, or have a speech disability may dial 711 (TTY, TDD, or TeleBraille) to access telecommunications relay services. Additional Program information can be found at: https://www.bia.gov/service/ grants/ttgp. SUPPLEMENTARY INFORMATION : This Office of Indian Economic Development (OIED) announcement for the forthcoming FY 2024 Tribal Tourism Grant Program (TTGP) Notice of Funding Opportunity (NOFO) provides interested applicants time to prepare their applications prior to the opening of the application period. The OIED expects the official NOFO solicitation to run for approximately 90 days on Grants.gov to receive applications. Additional information for the FY 2024 TTGP NOFO, as well as a link to the final NOFO posting on Grants.gov, will be available on OIED’s website at the following URL: https://www.bia.gov/ service/grants/ttgp. Eligible applicants include: • Native American Tribal Governments (federally recognized); • Native American Tribal Organizations (other than federally recognized); and • Indian Tribes and Tribal Organizations, as defined in section 4 of the Indian Self-Determination and Education Assistance Act (ISDEAA) (25 U.S.C. 5304), including Tribal Consortia. The FY 2024 TTGP cohort anticipates awarding $1.4 million in total funding. The OIED estimates awarding 10 to 15 grants, ranging in value from $75,000 to $150,000 in total funding for a 24-month period of performance. The FY 2024 TTGP is to fund implementation projects for tribal tourism which will be achieved within the period of performance. The forthcoming NOFO will provide the structure by which the applications will be reviewed and evaluated as they implement their tourism project. While the OIED will not accept applications until the open solicitation period, interested applicants may submit questions to the grant program contacts. OIED will not fund an implementation project that has comparable activities previously carried out under other Federal assistance programs or has construction or construction related components. Applicants are encouraged to conduct the required registration activities for the System for Award Management (SAM), Unique Entity Identifier (UEI), the Automated Standard Application for Payment (ASAP), as well as acquire Tribal authorizations. The required method of submitting proposals during the open solicitation period is through Grants.gov. For additional information on how to apply, see the grant instructions available at: https://apply07.grants.gov/help/html/ help/Applicants/HowToApplyFor Grants.htm. Bryan Newland, Assistant Secretary—Indian Affairs. [FR Doc. 2024–16904 Filed 7–31–24; 8:45 am] BILLING CODE 4337–15–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–608 and 731– TA–1420 (Review)] Steel Racks From China; Institution of Five-Year Reviews AGENCY : International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the antidumping and countervailing duty orders on steel racks from China would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted August 1, 2024. To be assured of consideration, the deadline for responses is September 3, 2024. Comments on the adequacy of responses may be filed with the Commission by October 10, 2024. FOR FURTHER INFORMATION CONTACT : Peter Stebbins (202–205–2039), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00070 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 62780 Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On September 16, 2019, the Department of Commerce (‘‘Commerce’’) issued antidumping and countervailing duty orders on imports of steel racks from China (84 FR 48584). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Country in these reviews is China. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, the Commission defined the Domestic Like Product as consisting of all steel racks, coextensive with the scope of these investigations. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, the Commission defined the Domestic Industry as all producers of steel racks. (5) The Order Date is the date that the antidumping and countervailing duty orders. In these reviews, the Order Date is September 16, 2019. (6) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is on or before 5:15 p.m. on September 3, 2024. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct expedited or full reviews. The deadline for filing such comments is on or before 5:15 p.m. on October 10, 2024. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00071 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 62781Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 24–5–611, expiration date June 30, 2026. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determinations in the reviews. Information to be Provided in Response to This Notice of Institution: As used below, the term ‘‘firm’’ includes any related firms. Those responding to this notice of institution are encouraged, but not required, to visit the USITC’s website at https://usitc.gov/reports/response_noi_ worksheet, where one can download and complete the ‘‘NOI worksheet’’ Excel form for the subject proceeding, to be included as attachment/exhibit 1 of your overall response. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the antidumping and countervailing duty orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in § 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in the Subject Country that currently export or have exported Subject Merchandise to the United States or other countries since the Order Date. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and Email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2023, except as noted (report quantity data in pounds and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2023 (report quantity data in pounds and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00072 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 62782 Federal Register / Vol. 89, No. 148 / Thursday, August 1, 2024 / Notices Merchandise imported from the Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from the Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2023 (report quantity data in pounds and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in the Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in the Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in the Subject Country since the Order Date, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in the Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: July 24, 2024. Lisa Barton, Secretary to the Commission. [FR Doc. 2024–16628 Filed 7–31–24; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest AGENCY : International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Semiconductor Devices and Products Containing the Same, DN 3763; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant’s filing pursuant to the Commission’s Rules of Practice and Procedure. FOR FURTHER INFORMATION CONTACT : Lisa R. Barton, Secretary to the Commission, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 205–2000. The public version of the complaint can be accessed on the Commission’s Electronic Document Information System (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at United States International Trade Commission (USITC) at https://www.usitc.gov. The public record for this investigation may be viewed on the Commission’s Electronic Document Information System (EDIS) at https://edis.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission has received a complaint and a submission pursuant to § 210.8(b) of the Commission’s Rules of Practice and Procedure filed on behalf of Infineon Technologies Americas Corp. and Infineon Technologies Austria AG on July 26, 2024. The complaint alleges violations of section 337 of the Tariff Act of 1930 (19 U.S.C. 1337) in the importation into the United States, the sale for importation, and the sale within the United States after importation of certain semiconductor devices and products containing the same. The complaint names as respondents: Innoscience (Suzhou) Technology Company, Ltd. of China; Innoscience (Suzhou) Semiconductor Co., Ltd. of China; Innoscience (Zhuhai) Technology Company, Ltd. of China; Innoscience America, Inc. of Santa Clara, CA. The complainant requests that the Commission issue a limited exclusion order, cease and desist orders, and impose a bond upon respondents’ alleged infringing articles during the 60- day Presidential review period pursuant to 19 U.S.C. 1337(j). Proposed respondents, other interested parties, members of the public, and interested government agencies are invited to file comments on any public interest issues raised by the complaint or § 210.8(b) filing. Comments should address whether issuance of the relief specifically requested by the complainant in this investigation would affect the public health and welfare in the United States, competitive conditions in the United States economy, the production of like or directly competitive articles in the United States, or United States consumers. In particular, the Commission is interested in comments that: (i) explain how the articles potentially subject to the requested remedial orders are used in the United States; (ii) identify any public health, safety, or welfare concerns in the United States relating to the requested remedial orders; (iii) identify like or directly competitive articles that complainant, its licensees, or third parties make in the United States which could replace the subject articles if they were to be excluded; VerDate Sep<11>2014 17:17 Jul 31, 2024 Jkt 262001 PO 00000 Frm 00073 Fmt 4703 Sfmt 4703 E:\FR\FM\01AUN1.SGM 01AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Scheduling === 96266 Federal Register / Vol. 89, No. 233 / Wednesday, December 4, 2024 / Notices 1 A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s website. B. Articles and Entities Covered by This Finding This Finding covers aluminum extrusions and profile products and derivatives produced or manufactured wholly or in part with aluminum and articles thereof classified under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7604.21.0010, 7604.29.1010, 7604.29.3060, 7604.29.5050, 7604.29.5090, 7608.20.0090, 7610.90.0080 and any other relevant subheadings under Chapter 76, which are produced or manufactured wholly or in part by Kingtom Aluminio S.R.L. The Secretary of Homeland Security has reviewed and approved this Finding. Rose M. Brophy, Acting Executive Assistant Commissioner, Office of Trade. [FR Doc. 2024–27686 Filed 12–3–24; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF THE INTERIOR Bureau of Land Management [BLM_AK_FRN_MO4500183286; AA–10495] Alaska Native Claims Selection AGENCY : Bureau of Land Management, Interior. ACTION : Notice of decision approving lands for conveyance. SUMMARY : The Bureau of Land Management (BLM) hereby provides constructive notice that it will issue an appealable decision approving conveyance of the surface and subsurface estates in certain lands to Sealaska Corporation, an Alaska Native regional corporation, pursuant to the Alaska Native Claims Settlement Act of 1971 (ANCSA), as amended. DATES : Any party claiming a property interest in the lands affected by the decision may appeal the decision in accordance with the requirements of 43 CFR part 4 within the time limits set out in the SUPPLEMENTARY INFORMATION section. ADDRESSES : You may obtain a copy of the decision from the Bureau of Land Management, Alaska State Office, 222 West Seventh Avenue, #13, Anchorage, AK 99513–7504. FOR FURTHER INFORMATION CONTACT : Dina L. Torres, BLM Alaska State Office, 907– 271–5699, or dtorres@blm.gov. Individuals in the United States who are deaf, deafblind, hard of hearing, or have a speech disability may dial 711 (TTY, TDD, or TeleBraille) to access telecommunications relay services. Individuals outside the United States should use the relay services offered within their country to make international calls to the point of contact in the United States. SUPPLEMENTARY INFORMATION : As required by 43 CFR 2650.7(d), notice is hereby given that the BLM will issue an appealable decision to Sealaska Corporation. The decision approves conveyance of the surface and subsurface estates in certain lands pursuant to ANCSA (43 U.S.C. 1601, et seq.), as amended. The lands are located on Baranof Island, Alaska, within T. 57 S., R. 64 E., Copper River Meridian, Alaska, and aggregate 10.54 acres. The decision addresses public access easements, if any, to be reserved to the United States pursuant to sec. 17(b) of ANCSA (43 U.S.C. 1616(b)), in the lands described above. The BLM will also publish notice of the decision once a week for four consecutive weeks in the ‘‘Juneau Empire’’ newspaper. Any party claiming a property interest in the lands affected by the decision may appeal the decision in accordance with the requirements of 43 CFR part 4 within the following time limits: 1. Unknown parties, parties unable to be located after reasonable efforts have been expended to locate, parties who fail or refuse to sign their return receipt, and parties who receive a copy of the decision by regular mail which is not certified, return receipt requested, shall have until January 3, 2025 to file an appeal. 2. Parties receiving service of the decision by certified mail shall have 30 days from the date of receipt to file an appeal. Parties who do not file an appeal in accordance with the requirements of 43 CFR part 4 shall be deemed to have waived their rights. Notices of appeal transmitted by facsimile will not be accepted as timely filed. Dina L. Torres, Management and Program Analyst, Division of Lands and Cadastral. [FR Doc. 2024–28373 Filed 12–3–24; 8:45 am] BILLING CODE 4331–10–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–608 and 731– TA–1420 (Review)] Steel Racks From China; Scheduling of Expedited Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of expedited reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether revocation of the antidumping and countervailing duty orders on steel racks from China would be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time. DATES : November 4, 2024. FOR FURTHER INFORMATION CONTACT : Peter Stebbins (202) 205–2039, Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On November 4, 2024, the Commission determined that the domestic interested party group response to its notice of institution (89 FR 62779, August 1, 2024) of the subject five-year reviews was adequate and that the respondent interested party group response was inadequate. The Commission did not find any other circumstances that would warrant conducting full reviews. 1 Accordingly, the Commission determined that it would conduct expedited reviews pursuant to section 751(c)(3) of the Act (19 U.S.C. 1675(c)(3)). For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Staff report.—A staff report containing information concerning the subject matter of the reviews has been placed in the nonpublic record, and will be made available to persons on the Administrative Protective Order service list for these reviews on January 28, 2025. A public version will be issued VerDate Sep<11>2014 17:36 Dec 03, 2024 Jkt 265001 PO 00000 Frm 00062 Fmt 4703 Sfmt 4703 E:\FR\FM\04DEN1.SGM 04DEN1 ddrumheller on DSK120RN23PROD with NOTICES1 96267Federal Register / Vol. 89, No. 233 / Wednesday, December 4, 2024 / Notices 2 The Commission has found the response submitted on behalf of the Coalition for Fair Rack Imports, an association of U.S. producers of steel racks, to be individually adequate. Comments from other interested parties will not be accepted (see 19 CFR 207.62(d)(2)). thereafter, pursuant to § 207.62(d)(4) of the Commission’s rules. Written submissions.—As provided in § 207.62(d) of the Commission’s rules, interested parties that are parties to the reviews and that have provided individually adequate responses to the notice of institution, 2 and any party other than an interested party to the reviews may file written comments with the Secretary on what determination the Commission should reach in the reviews. Comments are due on or before 5:15 p.m. on February 5, 2025, and may not contain new factual information. Any person that is neither a party to the five-year reviews nor an interested party may submit a brief written statement (which shall not contain any new factual information) pertinent to the reviews by February 5, 2025. However, should the Department of Commerce (‘‘Commerce’’) extend the time limit for its completion of the final results of its reviews, the deadline for comments (which may not contain new factual information) on Commerce’s final results is three business days after the issuance of Commerce’s results. If comments contain business proprietary information (BPI), they must conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Determination.—The Commission has determined that these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Act; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: November 29, 2024. Sharon Bellamy, Supervisory Hearings and Information Officer. [FR Doc. 2024–28413 Filed 12–3–24; 8:45 am] BILLING CODE 7020–02–P NATIONAL SCIENCE FOUNDATION Astronomy and Astrophysics Advisory Committee; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92– 463, as amended), the National Science Foundation (NSF) announces the following meeting: Name and Committee Code: Astronomy and Astrophysics Advisory Committee (13883) (Hybrid). Date and Time: January 30–January 31, 2025; 9:30 a.m.–4:30 p.m. Place: National Science Foundation, 2415 Eisenhower Avenue, Room 2210/ 2220, Alexandria, VA 22314 (In-Person and Virtual). This is a hybrid meeting. Members and the public may attend virtually via Zoom or in person. Attendance information for the meeting will be forthcoming on the website: https://www.nsf.gov/mps/ast/ aaac.jsp. The link for registration for Zoom is: https://nsf.zoomgov.com/webinar/ register/WN_ ihbu7M8uTYG1GQjf0F6YHw. Type of Meeting: Open. Contact Person: Dr. Daniel Fabrycky, Program Director, Division of Astronomical Sciences, Suite W 9176, National Science Foundation, 2415 Eisenhower Avenue, Alexandria, VA 22314; Telephone: 703–292–8490. Purpose of Meeting: To hear presentations of current programming by representatives from NSF, NASA, DOE and other agencies relevant to astronomy and astrophysics; to discuss current and potential areas of cooperation between the agencies; to formulate recommendations for continued and new areas of cooperation and mechanisms for achieving them. Agenda: To provide updates on Agency activities and to discuss the Committees draft annual report due 15 March 2025. Dated: November 29, 2024. Crystal Robinson, Committee Management Officer. [FR Doc. 2024–28400 Filed 12–3–24; 8:45 am] BILLING CODE 7555–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Notice of Intent To Rule on Request To Release Airport Property at the Laredo International Airport (LRD), Laredo, TX AGENCY : Federal Aviation Administration (FAA), DOT. ACTION : Notice of request to release airport property. SUMMARY : The FAA proposes to rule and invite public comment on the release of land at the Laredo International Airport under the provisions of the Federal Property and Administrative Services Act of 1949, and the Surplus Property Act of 1944. DATES : Comments must be received on or before January 3, 2025. ADDRESSES : Comments on this application may be mailed or delivered to the FAA at the following address: Mr. Rodney Clark, Manager, Federal Aviation Administration, Southwest Region, Airports Division, Texas Airports Development Office, ASW– 650, Fort Worth, Texas 76177. In addition, one copy of any comments submitted to the FAA must be mailed or delivered to Gilberto Sanchez, Airport Director, at the following address: 5210 Bob Bullock Loop, Laredo, TX 78041. FOR FURTHER INFORMATION CONTACT : Mr. Sean Newton, Program Manager, Federal Aviation Administration, Texas Airports Development Office, ASW– 650, 10101 Hillwood Parkway, Fort Worth, Texas 76177. Telephone: (817) 222–5560. Email: Sean.A.Newton@ FAA.gov. Fax: (817) 222–5989. SUPPLEMENTARY INFORMATION : The Laredo International Airport is under the provisions of the Federal Property and Administrative Services Act of 1949, and the Surplus Property Act of 1944. The following is a brief overview of the request: The City of Laredo requests the release of 7.498 acres of airport land located at approximately 5210 Bob Bullock Loop, Laredo, TX 78041. The land was acquired by Indenture of the Federal Property and Administrative Services Act of 1949, and the Surplus Property Act of 1944. The property to be released will be sold to Texas Department of Transportation for US Highway 59 right-of-way improvements. The proceeds of the sale will benefit civil aviation through airport improvements. Any person may inspect the request in person at the FAA office listed above VerDate Sep<11>2014 17:36 Dec 03, 2024 Jkt 265001 PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 E:\FR\FM\04DEN1.SGM 04DEN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - AD - China === 96947Federal Register / Vol. 89, No. 235 / Friday, December 6, 2024 / Notices 1 See Initiation of Five-Year (Sunset) Reviews, 89 FR 62717 (August 1, 2024). 2 See Certain Steel Racks and Parts Thereof from the People’s Republic of China: Amended Final Affirmative Antidumping Duty Determination and Antidumping Duty Order, 84 FR 48584 (September 16, 2019) (Order). 3 The domestic interested parties are part of a coalition, Coalition for Fair Rack Imports (‘‘CFRI’’). The members of CFRI are Heartland Steel Products, Speed Rack Products Group, Ltd, Husky Rack and Wire, Steel King Industries Inc., Nucor Warehouse Systems, Tri-Boro Shelving & Partition Corp., Ridg- U-Rack, and UNARCO Material Handling, Inc. 4 See Coalition for Fair Rack Imports’ Letter, ‘‘Notice of Intent to Participate in the First Five- Year Review,’’ dated August 16, 2024, (Domestic Interested Parties’ Intent to Participate). 5 See Domestic Interested Parties’ Letter, ‘‘Substantive Response to Notice of Initiation,’’ dated September 3, 2024 (Domestic Interested Parties’ Substantive Response). 6 See Domestic Interested Parties’ Intent to Participate. 7 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on August 1, 2024,’’ dated September 24, 2024; see also 19 CFR 351.218(3)(1)(ii)(C)(1). DEPARTMENT OF COMMERCE International Trade Administration Agency Information Collection Activities; Submission to the Office of Management and Budget (OMB) for Review and Approval; Comment Request; Surveys for User Satisfaction, Impact and Needs The Department of Commerce will submit the following information collection request to the Office of Management and Budget (OMB) for review and clearance in accordance with the Paperwork Reduction Act of 1995, on or after the date of publication of this notice. We invite the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. Public comments were previously requested via the Federal Register on September 10, 2024, during a 60-day comment period. This notice allows for an additional 30 days for public comments. Agency: International Trade Administration, Commerce. Title: Surveys for User Satisfaction, Impact and Needs. OMB Control Number: 0625–0275. Form Number(s): None. Type of Request: Renewal submission with revision to a currently approved collection. Number of Respondents: 44,149. Average Hours per Response: 30 minutes. Burden Hours: 22,075. Needs and Uses: The International Trade Administration provides a multitude of international trade related programs to help U.S. businesses. These programs include information products, services, and trade events. To accomplish its mission effectively, ITA needs ongoing feedback on its programs. This information collection instrument allows ITA to solicit customer opinions about their use of and engagement with ITA websites, programs, products, services, and events. To promote optimal use and provide focused and effective improvements to ITA programs, we are requesting approval for this clearance package; including: use of Comment Cards (i.e. transactional-based surveys) to collect feedback immediately after ITA assistance is provided to customers; use of annual surveys (i.e. relationship- based surveys) to gauge overall satisfaction, impact and needs for customers with ITA assistance provided over a period time. Without this information, ITA is unable to systematically determine the actual and relative levels of performance for its programs and products/services and to provide clear, actionable insights for managerial intervention. This information will be aggregated as part of ITA’s Voice of Customer (VOC) program, an enterprise approach to analyze, report and act on customer feedback captured across key touchpoints. ITA will use this data for continued evaluation and improvement, strategic planning, allocation of resources, stakeholder reporting, and to ultimately improve customer experiences. Affected Public: Individuals or households; Business or other for-profit organizations, Not-for-profit institutions. Frequency: On occasion. Respondent’s Obligation: Voluntary. Legal Authority: 15 U.S.C. 1512 et seq. and 15 U.S.C. 171 et seq. This information collection request may be viewed at www.reginfo.gov. Follow the instructions to view the Department of Commerce collections currently under review by OMB. Written comments and recommendations for the proposed information collection should be submitted within 30 days of the publication of this notice on the following website www.reginfo.gov/ public/do/PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function and entering either the title of the collection or the OMB Control Number 0625–0275. Sheleen Dumas, Departmental PRA Clearance Officer, Office of the Under Secretary for Economic Affairs, Commerce Department. [FR Doc. 2024–28562 Filed 12–5–24; 8:45 am] BILLING CODE 3510–FP–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–088] Certain Steel Racks and Parts Thereof From the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Antidumping Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of this expedited first sunset review, the U.S. Department of Commerce (Commerce) finds that revocation of the antidumping duty (AD) order on steel racks from the People’s Republic of China (China) would likely lead to continuation or recurrence of dumping at the level indicated in the ‘‘Final Results of Expedited Sunset Review’’ section of this notice. DATES : Applicable December 6, 2024. FOR FURTHER INFORMATION CONTACT : Howard Smith, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–5193. SUPPLEMENTARY INFORMATION : Background After Commerce initiated this sunset review 1 of the Order,2 pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act), domestic interested parties 3 timely submitted a notices of intent to participate in the sunset review,4 and an adequate substantive response regarding the sunset review.5 The domestic interested parties claimed interested party status under section 771(9)(E) of the Act as a trade association of domestic producers of steel racks.6 Commerce did not receive a substantive response from any respondent interested party, nor was a hearing requested. Consequently, on September 24, 2024, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from any respondent interested parties.7 As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of the Order. The VerDate Sep<11>2014 18:02 Dec 05, 2024 Jkt 265001 PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 E:\FR\FM\06DEN1.SGM 06DEN1 lotter on DSK11XQN23PROD with NOTICES1 96948 Federal Register / Vol. 89, No. 235 / Friday, December 6, 2024 / Notices 8 See Memorandum, ‘‘Issues and Decision Memorandum for the Final Results of the Expedited Sunset Review of the Antidumping Duty Order on Steel Racks from the People’s Republic of China,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 9 Id. deadline for the final results of this expedited sunset review is now November 29, 2024. Scope of the Order The merchandise subject to the Order is steel racks from China. For a complete description of the scope of the Order, see the Issues and Decisions Memorandum. 8 Analysis of Comments Received A complete discussion of all issues raised in this sunset review, including the likelihood of continuation or recurrence of dumping and the magnitude of the dumping margin likely to prevail if the Order were to be revoked, is provided in the accompanying Issues and Decision Memorandum. 9 A list of the sections in the Issues and Decision Memorandum is in the appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/ public/FRNoticesListLayout.aspx. Final Results of Expedited Sunset Review Pursuant to sections 751(c)(1) and 752(c)(1) and (3) of the Act, Commerce determines that revocation of the Order would likely lead to continuation or recurrence of dumping, and that the magnitude of the dumping margins likely to prevail are weighted-average dumping margins up to 144.50 percent. Administrative Protective Order This notice serves as the only reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely notification of the return or destruction of APO materials or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing, and publishing notice of, the results of this sunset review in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2) and 19 CFR 351.221(c)(5)(ii). Dated: November 29, 2024. Steven Presing, Acting Deputy Assistant Secretary for Policy and Negotiations. Appendix—List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of Dumping 2. Magnitude of the Margins of Dumping Likely to Prevail VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2024–28505 Filed 12–5–24; 8:45 am] BILLING CODE 3510–DS–P COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Additions and Deletions and Correction AGENCY : Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION : Proposed additions to and deletions from the Procurement List and correction to previous Notice. SUMMARY : The Committee is proposing to add service(s) to the Procurement List that will be furnished by nonprofit agencies employing persons who are blind or have other severe disabilities, deletes product(s) and service(s) previously furnished by such agencies and correct a previous Notice. DATES : Comments must be received on or before: January 05, 2025. ADDRESSES : Committee for Purchase From People Who Are Blind or Severely Disabled, 355 E Street SW, Suite 325, Washington, DC 20024. FOR FURTHER INFORMATION CONTACT : For further information or to submit comments contact: Mike Jurkowski, Telephone: (703) 489–1322, or email CMTEFedReg@AbilityOne.gov. SUPPLEMENTARY INFORMATION : This notice is published pursuant to 41 U.S.C. 8503(a)(2) and 41 CFR 51–2.3. Its purpose is to provide interested persons an opportunity to submit comments on the proposed actions. Additions In accordance with 41 CFR 51–5.3(b), the Committee intends to add this services requirement to the Procurement List as a mandatory purchase only for the contracting activity and location listed below with the proposed qualified nonprofit agency as the authorized source of supply. Prior to adding the service to the Procurement List, the Committee will consider other pertinent information, including information from Government personnel and relevant comments from interested parties regarding the Committee’s intent to geographically limit this services requirement. If the Committee approves the proposed additions, the entities of the Federal Government identified in this notice will be required to procure the service(s) listed below from nonprofit agencies employing persons who are blind or have other severe disabilities. The following service(s) are proposed for addition to the Procurement List for production by the nonprofit agencies listed: Service(s) Service Type: Custodial Service Mandatory for: US Air Force, Goodfellow AFB, TX Authorized Source of Supply: Work Services Corporation Contracting Activity: US Air Force FA3030 17 CONS CC Deletions The following product(s) and service(s) are proposed for deletion from the Procurement List: Product(s) NSN(s)—Product Name(s): 7510–01–579–9321—Binder, Removable Slant-D Rings, 100% Recyclable, Turned Edge, Blue, 11 ⁄2″ Capacity, Letter Authorized Source of Supply: South Texas Lighthouse for the Blind, Corpus Christi, TX Contracting Activity: GSA/FAS ADMIN SVCS ACQUISITION BR(2, NEW YORK, NY Contracting Activity: STRATEGIC ACQUISITION CENTER, FREDERICKSBURG, VA Service(s) Service Type: Mail and Messenger Service Mandatory for: US Army, Tobyhanna Army Depot, Tobyhanna, PA; 11 Hap Arnold Boulevard; Tobyhanna, PA Authorized Source of Supply: The Burnley Workshop of the Poconos, Inc., Stroudsburg, PA Contracting Activity: DEPT OF THE ARMY, W0ML USA DEP TOBYHANNA Correction On November 8, 2024 the Committee announced in an initial Federal Register VerDate Sep<11>2014 18:02 Dec 05, 2024 Jkt 265001 PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 E:\FR\FM\06DEN1.SGM 06DEN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - CVD - China === 96945Federal Register / Vol. 89, No. 235 / Friday, December 6, 2024 / Notices 1 See Certain Steel Racks and Parts Thereof From the People’s Republic of China: Amended Final Affirmative Antidumping Duty Determination and Antidumping Duty Order; and Countervailing Duty Order, 84 FR 48584 (September 16, 2019) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 89 FR 62717 (August 1, 2024). 3 See CFRI’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Countervailing Duty Order on Certain Steel Racks and Parts Thereof from the People’s Republic of China,’’ dated August 16, 2024. subassemblies thereof, whether finished or unfinished and whether assembled or unassembled, with or without tires, wheels, seats, steering columns and steering wheels, canopies, roofs, or batteries. LSPTVs meeting this description are generally open-air vehicles with a minimum of four wheels, a steering wheel, a traditional side-by-side or in-line row seating arrangement (i.e., non- straddle), foot operated accelerator and brake pedals, and a gross vehicle weight of no greater than 5,500 pounds. The main power source for subject LSPTVs is either an electric motor and battery (including but not limited to lithium-ion batteries, lithium phosphate batteries, lead acid batteries, and absorbed glass mat batteries) or a gas- powered internal combustion engine. Subject LSPTVs may be described as golf carts, golf cars, low speed vehicles, personal transportation vehicles, or light utility vehicles. LSPTVs subject to this investigation typically have a maximum top nameplate speed of no greater than 25 miles per hour as required by federal, state, and local laws and regulations. Subject LSPTVs with a maximum top nameplate speed greater than 20 miles per hour normally must comply with the U.S. Department of Transportation’s Federal Motor Vehicle Safety Standards for Low-Speed Vehicles set forth in 49 CFR 571.500. LSPTVs that otherwise meet the physical description of this scope but are not certified under 49 CFR 571.500 and are not certified under other sections of subpart B of the Federal Motor Vehicle Safety Standards (49 CFR part 571), are not excluded from this investigation. LSPTVs that are certified under both 49 CFR 571.500 and other sections of subpart B of the Federal Motor Vehicle Safety Standards remain subject to the scope of this investigation. Subject LSPTVs that have a maximum top nameplate speed of less than 25 miles per hour may be certified to the SAE International (SAE) standards SAE J2258 and SAE J2358. LSPTVs that have a maximum top nameplate speed of less than 20 miles per hour may also be certified to the Outdoor Power Equipment Institute (OPEI) standards OPEI Z130.1 and OPEI Z135. An unfinished and/or unassembled LSPTV subject to this investigation covers at a minimum a subassembly, also known as a ‘‘rolling chassis,’’ which is typically comprised of, but not limited to, a frame or body with front and/or rear suspension components (such as arms, springs, axles, spindles, and shafts) installed and powertrain components (including either an electric motor or a gas-powered internal combustion engine) installed or ready for installation. When imported together with a rolling chassis subject to this investigation, other LSPTV components, such as batteries, bumpers, wheel and tire assemblies, cowlings, fenders, grills, kick plates, steering column and steering wheel assemblies, dash assembly, seat assemblies, pedal assemblies, brake assemblies, canopy or roof assemblies, temporary rain enclosures, windshields, mirrors, headlights, taillights, lighting systems, or storage—whether assembled or unassembled, whether as part of a kit or not, and whether or not accompanied by additional components—constitute part of an unfinished and/or unassembled LSPTV that is subject to this investigation. The inclusion of other products, components, or assemblies not described here does not remove the product from the scope. Subject LSPTVs and subassemblies are covered by the scope of this investigation whether or not they are accompanied by other parts. This investigation covers all LSPTVs and subassemblies meeting the physical description of the scope, regardless of overall length, width, or height. Individual components that do not comprise a subject LSPTV or subassembly that are entered and sold by themselves are not subject to the investigation, but components entered with a LSPTV or subassembly, whether finished or unfinished and whether assembled or unassembled, are subject merchandise. LSPTVs and subassemblies subject to this investigation include those that are produced in the subject country whether assembled with other components in the subject country or in a third country. Processing or completion of finished and unfinished LSPTVs and subassemblies either in the subject country or in a third country does not remove the product from the scope. Specifically excluded from the scope of this investigation are all-terrain vehicles (which typically have straddle seating and are steered by handlebars), multipurpose off- highway utility vehicles (which typically have a maximum top nameplate speed of greater than 25 miles per hour), and recreational off-highway vehicles (which typically have a maximum top nameplate speed of greater than 30 miles per hour). Also excluded from the scope are go-karts, electric scooters, golf trolleys, and mobility aids (which include power wheelchairs and scooters which are used for the express purpose of enabling mobility for a person). The LSPTVs subject to the investigation are typically classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 8703.10.5030. LSPTVs subject to the investigation may also enter under HTSUS subheading 8703.10.5060 and 8703.90.0100. The LSPTV subassemblies that are subject to the investigation typically enter under HTSUS subheadings 8706.00.1540 and 8707.10.0040. The HTSUS subheadings are provided for convenience and customs purposes only, and the written description of the merchandise subject to the investigation is dispositive. Appendix II List of Topics Discussed in the Preliminary Decision Memorandum I. Summary II. Background III. Alignment IV. Injury Test V. Preliminary Affirmative Determination of Critical Circumstances VI. Analysis of China’s Financial System VII. Diversification of China’s Economy VIII. Use of Facts Available and Adverse Inferences IX. Subsidies Valuation X. Benchmarks and Interest Rates XI. Analysis of Programs XII. Recommendation [FR Doc. 2024–28697 Filed 12–5–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–089] Steel Racks and Parts Thereof From the People’s Republic of China: Final Results of the Expedited Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) finds that revocation of the countervailing duty (CVD) order on steel racks and parts thereof (steel racks) from the People’s Republic of China (China) would be likely to lead to continuation or recurrence of countervailable subsidies at the levels indicated in the ‘‘Final Results of the Sunset Review’’ section of this notice. DATES : Applicable December 6, 2024. FOR FURTHER INFORMATION CONTACT : Stephanie Trejo, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4390. SUPPLEMENTARY INFORMATION : Background On September 16, 2019, Commerce published the Order on steels racks from China. 1 On August 1, 2024, Commerce published the notice of initiation of the first sunset review of the Order, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.218(c). 2 On August 16, 2024, Commerce received a notice of intent to participate in this review from the Coalition for Fair Rack Imports (CFRI), the domestic interested party, within the 15-day deadline specified in 19 CFR 351.218(d)(1)(i).3 CFRI claimed interested party status within the meaning of section 771(9)(E) of the Act VerDate Sep<11>2014 18:02 Dec 05, 2024 Jkt 265001 PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 E:\FR\FM\06DEN1.SGM 06DEN1 lotter on DSK11XQN23PROD with NOTICES1 96946 Federal Register / Vol. 89, No. 235 / Friday, December 6, 2024 / Notices 4 Id. at 2. 5 See CFRI’s Letter, ‘‘Certain Steel Racks and Parts Thereof from the People’s Republic of China: Domestic Interested Party’s Substantive Response to the Notice of Initiation,’’ dated September 3, 2024. 6 See Commerce’s Letter, ‘‘Sunset Reviews Initiated August 1, 2024,’’ dated September 24, 2024. 7 See Memorandum, ‘‘Issues and Decision Memorandum for the Final Results of the Expedited First Sunset Review of the Countervailing Duty Order on Steel Racks and Parts Thereof from the People’s Republic of China,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). and 19 CFR 351.102(b)(17) as a trade or business association a majority of whose members manufacture, produce, or wholesale a domestic like product in the United States. 4 On September 3, 2024, Commerce received an adequate substantive response from CFRI, within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).5 Commerce did not receive a substantive response from either the Government of China or any respondent interested party to this proceeding. On September 24, 2024, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from any respondent interested parties. 6 As a result, Commerce conducted an expedited (120-day) sunset review of the Order, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(B)(2) and (C)(2). Scope of the Order The merchandise covered by this Order is steel racks. For a complete description of the scope of the Order, see the Issues and Decision Memorandum. 7 Analysis of Comments Received A complete discussion of all issues raised in this sunset review, including the likelihood of continuation or recurrence of subsidization in the event of revocation of the Order and the countervailable subsidy rates likely to prevail if the Order were to be revoked, is provided in the Issues and Decision Memorandum. A list of the topics discussed in the Issues and Decision Memorandum is attached as an appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), which is available to registered users at https:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 751(c) and 752(b) of the Act, we determine that revocation of the Order would be likely to lead to continuation or recurrence of countervailable subsidies at the following net subsidy rates: Company Subsidy rate (percent ad valorem) Designa Inc .................................................................................................................................................................................... 102.23 Dongguan Baike Electronic Co., Ltd ............................................................................................................................................. 102.23 Ezidone Display Corp. Ltd ............................................................................................................................................................. 102.23 Fenghua Huige Metal Products Co., Ltd ....................................................................................................................................... 102.23 Formost Plastic Metal Works (Jiaxing) Co., Ltd ............................................................................................................................ 102.23 Jiangsu Kingmore Storage Equipment Manufacturing Co., Ltd .................................................................................................... 102.23 Nanjing Dongsheng Shelf Manufacturing Co., Ltd ........................................................................................................................ 1.50 Nanjing Huade Storage Equipment Manufacture Co., Ltd ............................................................................................................ 102.23 Ningbo Bocheng Home Products Co., Ltd .................................................................................................................................... 102.23 Ningbo Joys Imp. & Exp. Co., Ltd ................................................................................................................................................. 102.23 Ningbo Li Zhan Import & Export Co .............................................................................................................................................. 102.23 Qingdao Haineng Hardware Products Co., Ltd ............................................................................................................................. 102.23 Qingdao Huatian Hand Truck Co., Ltd .......................................................................................................................................... 102.23 Qingdao Zeal-Line Stainless Steel Products Co., Ltd ................................................................................................................... 102.23 Seven Seas Furniture Industrial (Xiamen) Co., Ltd ...................................................................................................................... 102.23 Shijiazhuang Wells Trading & Mfg. Co., Ltd ................................................................................................................................. 102.23 Tangshan Apollo Energy Equipment Company ............................................................................................................................ 102.23 All Others ....................................................................................................................................................................................... 1.50 Administrative Protective Order (APO) This notice serves as the only reminder to parties subject to an APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Notification to Interested Parties Commerce is issuing and publishing these final results and this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act, and 19 CFR 351.218. Dated: November 29, 2024. Steven Presing, Acting Deputy Assistant Secretary for Policy and Negotiations. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Rates Likely to Prevail 3. Nature of the Subsidies VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2024–28506 Filed 12–5–24; 8:45 am] BILLING CODE 3510–DS–P VerDate Sep<11>2014 18:02 Dec 05, 2024 Jkt 265001 PO 00000 Frm 00011 Fmt 4703 Sfmt 9990 E:\FR\FM\06DEN1.SGM 06DEN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Continuation - AD/CVD - China === 11720 Federal Register / Vol. 90, No. 46 / Tuesday, March 11, 2025 / Notices 1 See Certain Steel Racks and Parts Thereof, from the People’s Republic of China: Amended Final Affirmative Antidumping Duty Determination and Antidumping Duty Order; Countervailing Duty Order, 84 FR 48584 (September 16, 2019) (Orders). 2 See Steel Racks from China; Institution of Five- Year Reviews, 89 FR 62779 (August 1, 2024). 3 See Initiation of Five-Year (Sunset) Reviews, 89 FR 62717 (August 1, 2024). 4 See Certain Steel Racks and Parts Thereof from the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Antidumping Duty Order, 89 FR 96947 (December 6, 2024); see also Steel Racks and Parts Thereof, from the People’s Republic of China: Final Results of the Expedited Sunset Review of the Countervailing Duty Order, 89 FR 96945 (December 6, 2024). 5 See Steel Racks from China, 90 FR 11328 (March 5, 2025) (ITC Final Determination). Dated: March 4, 2025. Christopher Abbott, Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance. Appendix—List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of Dumping 2. Magnitude of the Margins of Dumping Likely to Prevail VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2025–03827 Filed 3–10–25; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–088, C–570–089] Steel Racks and Parts Thereof, From the People’s Republic of China: Continuation of Antidumping and Countervailing Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) and countervailing duty (CVD) orders on certain steel racks and parts thereof (steel racks) from the People’s Republic of China (China) would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD and CVD orders. DATES : Applicable March 5, 2025. FOR FURTHER INFORMATION CONTACT : Angelo Gonzalez, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–5521. SUPPLEMENTARY INFORMATION : Background On September 16, 2019, Commerce published in the Federal Register the AD and CVD orders on steel racks from China. 1 On August 1, 2024, the ITC instituted, 2 and Commerce initiated, 3 the first sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and subsidy rates likely to prevail should the Orders be revoked. 4 On March 5, 2025, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 5 Scope of the Orders The merchandise covered by these Orders is steel racks and parts thereof, assembled, to any extent, or unassembled, including but not limited to, vertical components (e.g., uprights, posts, or columns), horizontal or diagonal components (e.g., arms or beams), braces, frames, locking devices (e.g., end plates and beam connectors), and accessories (including, but not limited to, rails, skid channels, skid rails, drum/coil beds, fork clearance bars, pallet supports, row spacers, and wall ties). Subject steel racks and parts thereof are made of steel, including, but not limited to, cold and/or hot-formed steel, regardless of the type of steel used to produce the components and may, or may not, include locking tabs, slots, or bolted, clamped, or welded connections. Subject steel racks have the following physical characteristics: (1) Each steel vertical and horizontal load bearing member (e.g., arms, beams, posts, and columns) is composed of steel that is at least 0.044 inches thick; (2) Each steel vertical and horizontal load bearing member (e.g., arms, beams, posts, and columns) is composed of steel that has a yield strength equal to or greater than 36,000 pounds per square inch; (3) The width of each steel vertical load bearing member (e.g., posts and columns) exceeds two inches; and (4) The overall depth of each steel roll-formed horizontal load bearing member (e.g., beams) exceeds two inches. In the case of steel horizontal load bearing members other than roll-formed (e.g., structural beams, Z-beams, or cantilever arms), only the criteria in subparagraphs (1) and (2) apply to these horizontal load bearing members. The depth limitation in subparagraph (4) does not apply to steel horizontal load bearing members that are not roll- formed. Steel rack components can be assembled into structures of various dimensions and configurations by welding, bolting, clipping, or with the use of devices such as clips, end plates, and beam connectors, including, but not limited to the following configurations: (1) Racks with upright frames perpendicular to the aisles that are independently adjustable, with positive- locking beams parallel to the aisle spanning the upright frames with braces; and (2) cantilever racks with vertical components parallel to the aisle and cantilever beams or arms connected to the vertical components perpendicular to the aisle. Steel racks may be referred to as pallet racks, storage racks, stacker racks, retail racks, pick modules, selective racks, or cantilever racks and may incorporate moving components and be referred to as pallet-flow racks, carton-flow racks, push-back racks, movable-shelf racks, drive-in racks, and drive-through racks. While steel racks may be made to ANSI MH16.l or ANSI MH16.3 standards, all steel racks and parts thereof meeting the description set out herein are covered by the scope of these Orders, whether or not produced according to a particular standard. The scope includes all steel racks and parts thereof meeting the description above, regardless of (1) other dimensions, weight, or load rating; (2) vertical components or frame type (including structural, roll-form, or other); (3) horizontal support or beam/brace type (including but not limited to structural, roll-form, slotted, unslotted, Z-beam, C-beam, L-beam, step beam, and cantilever beam); (4) number of supports; VerDate Sep<11>2014 17:19 Mar 10, 2025 Jkt 265001 PO 00000 Frm 00022 Fmt 4703 Sfmt 4703 E:\FR\FM\11MRN1.SGM 11MRN1 lotter on DSK11XQN23PROD with NOTICES1 11721Federal Register / Vol. 90, No. 46 / Tuesday, March 11, 2025 / Notices 6 See Boltless Steel Shelving Units Prepackaged for Sale from the People’s Republic of China: Antidumping Duty Order, 80 FR 63,741 (October 21, 2017); and Boltless Steel Shelving Units Prepackaged for Sale from the People’s Republic of China: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order, 80 FR 63,745 (October 21, 2017). (5) number of levels; (6) surface coating, if any (including but not limited to paint, epoxy, powder coating, zinc, or other metallic coatings); (7) rack shape (including but not limited to rectangular, square, corner, and cantilever); (8) the method by which the vertical and horizontal supports connect (including but not limited to locking tabs or slots, bolting, clamping, and welding); and (9) whether or not the steel rack has moving components (including but not limited to rails, wheels, rollers, tracks, channels, carts, and conveyors). Subject merchandise includes merchandise matching the above description that has been finished or packaged in a third country. Finishing includes, but is not limited to, coating, painting, or assembly, including attaching the merchandise to another product, or any other finishing or assembly operation that would not remove the merchandise from the scope of these Orders if performed in the country of manufacture of the steel racks and parts thereof. Packaging includes packaging the merchandise with or without another product or any other packaging operation that would not remove the merchandise from the scope of these Orders if performed in the country of manufacture of the steel racks and parts thereof. Steel racks and parts thereof are included in the scope of these Orders whether or not imported attached to, or included with, other parts or accessories such as wire decking, nuts, and bolts. If steel racks and parts thereof are imported attached to, or included with, such non-subject merchandise, only the steel racks and parts thereof are included in the scope. The scope of these Orders does not cover: (1) decks, i.e., shelving that sits on or fits into the horizontal supports to provide the horizontal storage surface of the steel racks; (2) wire shelving units, i.e., units made from wire that incorporate both a wire deck and wire horizontal supports (taking the place of the horizontal beams and braces) into a single piece with tubular collars that slide over the posts and onto plastic sleeves snapped on the posts to create a finished unit; (3) pins, nuts, bolts, washers, and clips used as connecting devices; and (4) non-steel components. Specifically excluded from the scope of these Orders are any products covered by Commerce’s existing antidumping and countervailing duty orders on boltless steel shelving units prepackaged for sale from the People’s Republic of China.6 Also excluded from the scope of these Orders are bulk-packed parts or components of boltless steel shelving units that were specifically excluded from the scope of the Boltless Steel Shelving Orders because such bulk- packed parts or components do not contain the steel vertical supports (i.e., uprights and posts) and steel horizontal supports (i.e., beams, braces) packaged together for assembly into a completed boltless steel shelving unit. Such excluded components of boltless steel shelving are defined as: (1) Boltless horizontal supports (beams, braces) that have each of the following characteristics: (a) A length of 95 inches or less, (b) made from steel that has a thickness of 0.068 inches or less, and (c) a weight capacity that does not exceed 2,500 lbs. per pair of beams for beams that are 78″ or shorter, a weight capacity that does not exceed 2,200 lbs. per pair of beams for beams that are over 78″ long but not longer than 90″, and/or a weight capacity that does not exceed 1,800 lbs. per pair of beams for beams that are longer than 90″; (2) shelf supports that mate with the aforementioned horizontal supports; and (3) boltless vertical supports (upright welded frames and posts) that have each of the following characteristics: (a) A length of 95 inches or less, (b) with no face that exceeds 2.90 inches wide, and (c) made from steel that has a thickness of 0.065 inches or less. Excluded from the scope of these Orders are: (1) Wall-mounted shelving and racks, defined as shelving and racks that suspend all of the load from the wall, and do not stand on, or transfer load to, the floor; (2) ceiling-mounted shelving and racks, defined as shelving and racks that suspend all of the load from the ceiling and do not stand on, or transfer load to, the floor; and (3) wall/ ceiling mounted shelving and racks, defined as shelving and racks that suspend the load from the ceiling and the wall and do not stand on, or transfer load to, the floor. The addition of a wall or ceiling bracket or other device to attach otherwise subject merchandise to a wall or ceiling does not meet the terms of this exclusion. Also excluded from the scope of these Orders is scaffolding that complies with ANSI/ASSE A10.8—2011—Scaffolding Safety Requirements, CAN/CSA S269.2– M87 (Reaffirmed 2003)—Access Scaffolding for Construction Purposes, and/or Occupational Safety and Health Administration regulations at 29 CFR part 1926 subpart L—Scaffolds. Also excluded from the scope of these Orders are tubular racks such as garment racks and drying racks, i.e., racks in which the load bearing vertical and horizontal steel members consist solely of: (1) round tubes that are no more than two inches in diameter; (2) round rods that are no more than two inches in diameter; (3) other tubular shapes that have both an overall height of no more than two inches and an overall width of no more than two inches; and/or (4) wire. Also excluded from the scope of these Orders are portable tier racks. Portable tier racks must meet each of the following criteria to qualify for this exclusion: (1) They are freestanding, portable assemblies with a fully welded base and four freely inserted and easily removable corner posts; (2) They are assembled without the use of bolts, braces, anchors, brackets, clips, attachments, or connectors; (3) One assembly may be stacked on top of another without applying any additional load to the product being stored on each assembly, but individual portable tier racks are not securely attached to one another to provide interaction or interdependence; and (4) The assemblies have no mechanism (e.g., a welded foot plate with bolt holes) for anchoring the assembly to the ground. Also excluded from the scope of these Orders are accessories that are independently bolted to the floor and not attached to the rack system itself, i.e., column protectors, corner guards, bollards, and end row and end of aisle protectors. Merchandise covered by these Orders is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under the following subheadings: 7326.90.8688, 9403.20.0081, and 9403.90.8041. Subject merchandise may also enter under subheadings 7308.90.3000, 7308.90.6000, 7308.90.9590, and 9403.20.0090. The HTSUS subheadings are provided for convenience and U.S. Customs purposes only. The written description of the scope is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation VerDate Sep<11>2014 17:19 Mar 10, 2025 Jkt 265001 PO 00000 Frm 00023 Fmt 4703 Sfmt 4703 E:\FR\FM\11MRN1.SGM 11MRN1 lotter on DSK11XQN23PROD with NOTICES1 11722 Federal Register / Vol. 90, No. 46 / Tuesday, March 11, 2025 / Notices 7 See ITC Final Determination. of the Orders would likely lead to the continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders will be March 5, 2025.7 Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders no later than 30 days prior to the fifth anniversary of the date of the last determination by the ITC. Administrative Protective Order (APO) This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) and 751(d)(2) of the Act and this notice is published pursuant to section 777(i) of the Act and 19 CFR 351.218(f)(4). Dated: March 5, 2025. Christopher Abbott, Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance. [FR Doc. 2025–03860 Filed 3–10–25; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648–XE731] North Pacific Fishery Management Council; Public Meeting AGENCY : National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION : Notice of webconference. SUMMARY : The North Pacific Fishery Management Council (Council)’s Enforcement Committee will hold a webconference on Thursday, March 27, 2025. DATES : The Enforcement Committee will meet on Thursday, March 27, 2025, from 10 a.m. to 12 p.m., Alaska Time. ADDRESSES : The meeting will be by webconference. Join online through the link at https://meetings.npfmc.org/ Meeting/Details/3085. Council address: North Pacific Fishery Management Council, 1007 W 3rd Ave., Anchorage, AK 99501–2252; telephone: (907) 271–2809. Instructions for attending the meeting via webconference are given under SUPPLEMENTARY INFORMATION, below. FOR FURTHER INFORMATION CONTACT : Taylor Holman, Council staff; phone: (907) 271–2809; email: taylor.holman@ noaa.gov. For technical support, please contact our administrative staff, email: npfmc.admin@noaa.gov. SUPPLEMENTARY INFORMATION : Agenda Thursday, March 27, 2025 The Enforcement Committee will review the Council’s Small sablefish release analysis, the Maximum Retainable Amount (MRA) adjustments analysis, and other business including the Enforcement Committee Terms of Reference. The Small sablefish release analysis evaluates a proposed management measure to allow sablefish IFQ/CDQ harvesters using fixed gear in the BSAI and GOA to carefully release small sablefish. The MRA adjustment analysis evaluates proposed management measures to revise the MRA regulations to clarify and/or revise (1) the definition of a fishing trip, (2) calculations for MRAs, and (3) applications of MRAs. The agenda is subject to change, and the latest version will be posted at https://meetings.npfmc.org/Meeting/ Details/3085 prior to the meeting, along with meeting materials. Connection Information You can attend the meeting online using a computer, tablet, or smart phone; or by phone only. Connection information will be posted online at: https://meetings.npfmc.org/Meeting/ Details/3085. For technical support, please contact our administrative staff, email: npfmc.admin@noaa.gov. Public Comment Public comment letters will be accepted and should be submitted electronically to https://meetings. npfmc.org/Meeting/Details/3085. Authority: 16 U.S.C. 1801 et seq. Dated: March 6, 2025. Rey Israel Marquez, Acting Deputy Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2025–03873 Filed 3–10–25; 8:45 am] BILLING CODE 3510–22–P DEPARTMENT OF COMMERCE: National Oceanic and Atmospheric Administration [RTID 0648–XE735] Gulf of Mexico Fishery Management Council; Public Meeting AGENCY : National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION : Notice of public hybrid meeting. SUMMARY : The Gulf of Mexico Fishery Management Council (Council) will hold a four-day meeting to consider actions affecting the Gulf of Mexico fisheries in the exclusive economic zone (EEZ). DATES : The meeting will convene Monday, April 7 through Thursday, April 10, 2025. Daily schedule as follows: Monday, Tuesday & Thursday from 8:30 a.m. to 5 p.m., and Wednesday, April 9, from 8:30 a.m. to 5:30 p.m., CDT. ADDRESSES : The meeting will take place at The Lodge at Gulf State Park, located at 21196 East Beach Boulevard, Gulf Shores, AL 36542. If you prefer to ‘‘listen in,’’ you may access the log-on information by visiting our website at www.gulfcouncil.org. Council address: Gulf of Mexico Fishery Management Council, 4107 W Spruce Street, Suite 200, Tampa, FL 33607; telephone: (813) 348–1630. FOR FURTHER INFORMATION CONTACT : Dr. Carrie Simmons, Executive Director, Gulf of Mexico Fishery Management Council; telephone: (813) 348–1630. SUPPLEMENTARY INFORMATION : Monday, April 7, 2025; 8:30 a.m.–5 p.m., CDT The meeting will begin with the Coral Committee receiving a presentation and update on Florida Keys National Marine Sanctuary: Restoration Blueprint Final Management Plan, review Draft Memorandum of Agreement between VerDate Sep<11>2014 17:19 Mar 10, 2025 Jkt 265001 PO 00000 Frm 00024 Fmt 4703 Sfmt 4703 E:\FR\FM\11MRN1.SGM 11MRN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Determination === 11328 Federal Register / Vol. 90, No. 42 / Wednesday, March 5, 2025 / Notices 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–608 and 731– TA–1420 (Review)] Steel Racks From China Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing duty order and antidumping duty order on steel racks from China would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on August 1, 2024 (89 FR 62779, August 1, 2024) and determined on November 4, 2024, that it would conduct expedited reviews (89 FR 96266, December 4, 2024). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on February 27, 2025. The views of the Commission are contained in USITC Publication 5593 (February 2025), entitled Steel Racks from China: Investigation Nos. 701–TA– 608 and 731–TA–1420 (Review). By order of the Commission. Issued: February 27, 2025. Lisa Barton, Secretary to the Commission. [FR Doc. 2025–03505 Filed 3–4–25; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–1396] Certain Medical Programmers With Printed Circuit Boards, Components Thereof, and Products and Systems for Use With the Same; Notice of Commission Determination Not To Review an Initial Determination Terminating the Investigation in Its Entirety Based on Settlement; Termination of Investigation AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission has determined not to review an initial determination (‘‘ID’’) (Order No. 30) of the presiding administrative law judge (‘‘ALJ’’) granting a joint motion of the complainants and the respondent to terminate the investigation based on settlement. The investigation is terminated. FOR FURTHER INFORMATION CONTACT : Richard P. Hadorn, Esq., Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 205–3179. Copies of non-confidential documents filed in connection with this investigation may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal, telephone (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission instituted this investigation on April 3, 2024, based on a complaint filed by Medtronic, Inc., Medtronic Logistics, LLC, and Medtronic USA, Inc., all of Minneapolis, Minnesota, and Medtronic Puerto Rico Operations Co. of Juncos, Puerto Rico (collectively, ‘‘Medtronic’’). 89 FR 23043–44 (Apr. 3, 2024). The complaint, as supplemented, alleges violations of section 337 of the Tariff Act of 1930, as amended, 19 U.S.C. 1337, based on the importation into the United States, the sale for importation, and the sale within the United States after importation of certain medical programmers with printed circuit boards, components thereof, and products and systems for use with the same by reason of the infringement of certain claims of U.S. Patent Nos. 8,712,540 (‘‘the ’540 patent’’) and 9,174,059 (‘‘the ’059 patent’’). Id. at 23043. The complaint further alleges that a domestic industry exists. Id. The notice of investigation (‘‘NOI’’) names one respondent, Axonics, Inc. (‘‘Axonics’’) of Irvine, California. Id. at 23044. The Office of Unfair Import Investigations (‘‘OUII’’) is also named as a party. Id. On August 12, 2024, the Commission amended (i) the complaint to substitute ‘‘UNITED’’ in place of ‘‘MUNITED’’ on the cover page and (ii) the NOI so that the plain language description of the accused products reads ‘‘sacral neuromodulation systems to control neurostimulators surgically implanted into a human patient, components thereof, and medical programmers and printed circuit boards used in same.’’ Order No. 11 (July 11, 2024), unreviewed by 89 FR 66442 (Aug. 15, 2024). On September 30, 2024, the Commission terminated the investigation as to (i) claim 17 of the ’540 patent and (ii) the ’059 patent in its entirety based on Medtronic’s partial withdrawal of the complaint. Order No. 16 (Sept. 9, 2024), unreviewed by Comm’n Notice (Sept. 30, 2024). On November 15, 2024, the Commission terminated the investigation as to claim 5, solely for the purposes of infringement, and claims 11, 12, 14, 15, 18, 20, 39, and 40 of the ’540 patent based on Medtronic’s partial withdrawal of the complaint. Order No. 21 (Oct. 31, 2024), unreviewed by Comm’n Notice (Nov. 15, 2024). On February 10, 2025, Medtronic and Axonics filed a joint motion to terminate the investigation in its entirety based on a settlement agreement, attaching thereto confidential and non-confidential versions of the subject agreement. OUII did not file a response to the motion. On February 11, 2025, the ALJ issued Order No. 29, which (i) ordered Medtronic and Axonics to ‘‘revise and refile the non-confidential version of the agreement required by Commission Rules 210.21(a)(2) and 210.21(b)(1) [19 CFR 210.21(a)(2) and (b)(1)], and in accordance with Commission Rule 201.6 [19 CFR 201.6],’’ and (ii) stated that the motion to terminate will be ruled upon after the revised non- confidential version of the agreement is refiled. Order No. 29 at 2 (Feb. 11, 2025). On February 18, 2025, Medtronic and Axonics filed a revised non- confidential version of the subject agreement. On February 19, 2025, the ALJ issued the subject ID (Order No. 30) granting the joint motion. The ID finds that, as supplemented, the joint motion complies with the requirements of Commission Rule 210.21(b)(1), that there are ‘‘no extraordinary circumstances that warrant denying the motion,’’ and that ‘‘there is no evidence indicating that terminating this investigation based on the settlement agreement would be contrary to the public interest.’’ No petitions for review of the subject ID were filed. The Commission has determined not to review the subject ID. The investigation is hereby terminated in its entirety. VerDate Sep<11>2014 16:51 Mar 04, 2025 Jkt 265001 PO 00000 Frm 00080 Fmt 4703 Sfmt 4703 E:\FR\FM\05MRN1.SGM 05MRN1 khammond on DSK9W7S144PROD with NOTICES