Steel Wheels from China; Inv. Nos. 701-TA-602 and 731-TA-1412 (Review)

=== USITC Institution === 22451Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices DATES : March 26, 2024. FOR FURTHER INFORMATION CONTACT : Calvin Chang (202–205–3062), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these investigations may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—These investigations are being instituted, pursuant to section 733(a) of the Tariff Act of 1930 (19 U.S.C. 1673b(a)), in response to petitions filed on March 26, 2024, by Eastman Chemical Company, Kingsport, Tennessee. For further information concerning the conduct of these investigations and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and B (19 CFR part 207). Participation in the investigation and public service list.—Persons (other than petitioners) wishing to participate in the investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in §§ 201.11 and 207.10 of the Commission’s rules, not later than seven days after publication of this notice in the Federal Register. Industrial users and (if the merchandise under investigation is sold at the retail level) representative consumer organizations have the right to appear as parties in Commission antidumping duty investigations. The Secretary will prepare a public service list containing the names and addresses of all persons, or their representatives, who are parties to these investigations upon the expiration of the period for filing entries of appearance. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI gathered in these investigations available to authorized applicants representing interested parties (as defined in 19 U.S.C. 1677(9)) who are parties to the investigations under the APO issued in the investigations, provided that the application is made not later than seven days after the publication of this notice in the Federal Register. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Conference.—The Office of Investigations will hold a staff conference in connection with the preliminary phase of these investigations beginning at 9:30 a.m. on Tuesday, April 16, 2024. Requests to appear at the conference should be emailed to preliminaryconferences@ usitc.gov (DO NOT FILE ON EDIS) on or before Friday, April 12, 2024. Please provide an email address for each conference participant in the email. Information on conference procedures, format, and participation, including guidance for requests to appear as a witness via videoconference, will be available on the Commission’s Public Calendar (Calendar (USITC) | United States International Trade Commission). A nonparty who has testimony that may aid the Commission’s deliberations may request permission to participate by submitting a short statement. Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Written submissions.—As provided in §§ 201.8 and 207.15 of the Commission’s rules, any person may submit to the Commission on or before 5:15 p.m. on April 19, 2024, a written brief containing information and arguments pertinent to the subject matter of the investigations. Parties shall file written testimony and supplementary material in connection with their presentation at the conference no later than noon on April 15, 2024. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with these investigations must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that any information that it submits to the Commission during these investigations may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of these or related investigations or reviews, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.12 of the Commission’s rules. By order of the Commission. Issued: March 26, 2024. Katherine Hiner, Supervisory Attorney. [FR Doc. 2024–06791 Filed 3–29–24; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–602 and 731– TA–1412 (Review)] Steel Wheels From China; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing and antidumping duty orders on imports of steel wheels from China would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00080 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1 22452 Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices notice by submitting the information specified below to the Commission. DATES : Instituted April 1, 2024. To be assured of consideration, the deadline for responses is May 1, 2024. Comments on the adequacy of responses may be filed with the Commission by June 7, 2024. FOR FURTHER INFORMATION CONTACT : Alec Resch (202–708–1448), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On May 24, 2019, the Department of Commerce (‘‘Commerce’’) issued countervailing and antidumping duty orders on imports of steel wheels from China (84 FR 24098). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determination in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Country in these reviews is China. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, the Commission defined the Domestic Like Product as all steel wheels coextensive with Commerce’s scope. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, the Commission defined the Domestic Industry as all domestic producers of steel wheels. (5) The Order Date is the date that the countervailing and antidumping duty orders under review became effective. In these reviews, the Order Date is May 24, 2019. (6) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. appendix 3; or (ii) by U.S. Government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is on or before 5:15 p.m. on May 1, 2024. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct expedited or full reviews. The deadline for filing VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1 22453Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices such comments is on or before 5:15 p.m. on June 7, 2024. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https://www.usitc.gov/documents/ handbook_on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 24–5–596, expiration date June 30, 2026. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determination in the reviews. Information to Be Provided in Response to This Notice of Institution: As used below, the term ‘‘firm’’ includes any related firms. Those responding to this notice of institution are encouraged, but not required, to visit the USITC’s website at https://usitc.gov/reports/response_noi_ worksheet, where one can download and complete the ‘‘NOI worksheet’’ Excel form for the subject proceeding, to be included as attachment/exhibit 1 of your overall response. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the countervailing and antidumping duty orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in § 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in the Subject Country that currently export or have exported Subject Merchandise to the United States or other countries since the Order Date. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and Email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2023, except as noted (report quantity data in wheels and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2023 (report quantity data in wheels and value data in U.S. VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00082 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1 22454 Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject Merchandise imported from the Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from the Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2023 (report quantity data in wheels and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in the Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in the Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in the Subject Country since the Order Date, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in the Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: March 26, 2024. Katherine Hiner, Supervisory Attorney. [FR Doc. 2024–06740 Filed 3–29–24; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–1395] Certain Aerosol Fire Extinguishing Technology, Components Thereof, and Products Containing Same; Notice of Institution of Investigation AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on February 22, 2024, under section 337 of the Tariff Act of 1930, as amended, on behalf of Nano Fire LLC of Plainview, New York and Defender Safety, LLC of Plainview, New York. Supplements to the complaint were filed on February 27, March 12, and March 13, 2024. The complaint, as supplemented, alleges violations of section 337 based upon the importation into the United States, the sale for importation, and the sale within the United States after importation of certain aerosol fire extinguishing technology, components thereof, and products containing same by reason of the infringement of certain claims of U.S. Patent No. 8,865,014 (‘‘the ’014 patent’’) and U.S. Patent No. 9,199,108 (‘‘the ’108 patent’’). The complaint further alleges that an industry in the United States exists as required by the applicable Federal Statute. The complainants request that the Commission institute an investigation and, after the investigation, issue a limited exclusion order and a cease and desist order. ADDRESSES : The complaint, except for any confidential information contained therein, may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. Hearing impaired individuals are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at (202) 205– 2000. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. FOR FURTHER INFORMATION CONTACT : Pathenia M. Proctor, The Office of Unfair Import Investigations, telephone (202) 205–2560. SUPPLEMENTARY INFORMATION : Authority: The authority for institution of this investigation is contained in section 337 of the Tariff Act of 1930, as amended, 19 U.S.C. 1337, and in section 210.10 of the Commission’s Rules of Practice and Procedure, 19 CFR 210.10 (2023). Scope of Investigation: Having considered the complaint, the U.S. International Trade Commission, on March 25, 2024, ordered that— (1) Pursuant to subsection (b) of section 337 of the Tariff Act of 1930, as amended, an investigation be instituted to determine whether there is a violation of subsection (a)(1)(B) of section 337 in the importation into the United States, the sale for importation, or the sale within the United States after importation of certain products identified in paragraph (2) by reason of infringement of one or more of claims 1–4 of the ’014 patent and claims 1–3 VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00083 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Scheduling === 67102 Federal Register / Vol. 89, No. 160 / Monday, August 19, 2024 / Notices 1 A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s website. electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Millicent Brown Wilson, Records Management Branch Chief, Office of the Chief Administrative Officer, Mission Support, Federal Emergency Management Agency, Department of Homeland Security. [FR Doc. 2024–18448 Filed 8–16–24; 8:45 am] BILLING CODE 9111–BW–P DEPARTMENT OF THE INTERIOR Bureau of Land Management [BLM_WY_FRN_MO #4500181816] Filing of Plats of Survey, Wyoming AGENCY : Bureau of Land Management, Interior. ACTION : Notice of official filing. SUMMARY : The Bureau of Land Management (BLM) is scheduled to file plats of survey 30 calendar days from the date of this publication in the BLM Wyoming State Office, Cheyenne, Wyoming. These surveys, which were executed at the request of the U.S. Forest Service, the Bureau of Reclamation and the BLM are necessary for the management of these lands. DATES : Protests must be received by the BLM prior to the scheduled date of official filing by September 18, 2024. ADDRESSES : You may submit written protests to the Wyoming State Director at WY926, Bureau of Land Management, 5353 Yellowstone Road, Cheyenne, Wyoming 82009. FOR FURTHER INFORMATION CONTACT : Sonja Sparks, BLM Wyoming Chief Cadastral Surveyor, by telephone at 307–775–6225 or by email at s75spark@ blm.gov. Persons who use a telecommunications device for the deaf (TDD) may call the Federal Relay Service at 1–800–877–8339 to contact this office during normal business hours. The Service is available 24 hours a day, 7 days a week, to leave a message or question with this office. You will receive a reply during normal business hours. SUPPLEMENTARY INFORMATION : The plats of survey of the following described lands are scheduled to be officially filed in the BLM Wyoming State Office, Cheyenne, Wyoming. Sixth Principal Meridian, Wyoming T. 16 N., R. 78 W., Group No. WY1078, dependent resurvey, accepted July 12, 2024. T. 21 N., R. 88 W., Group No. WY1077, survey, accepted July 12, 2024; T. 22 N., R. 88 W., Group No. WY1077, dependent resurvey, accepted July 12, 2024; T. 14 N., R. 85 W., Group No. WY1083, dependent resurvey, accepted July 12, 2024; T. 52 N., R. 93 W., Group No. WY1087, dependent resurvey, accepted July 12, 2024; T. 24 N., R. 71 W., Group No. WY1092, dependent resurvey and survey, accepted August 2, 2024; T. 25 N., R. 71 W., Group No. WY1092, dependent resurvey, accepted August 2, 2024; T. 26 N., R. 72 W., Group No. WY1092, survey, accepted August 2, 2024; A person or party who wishes to protest one or more plats of survey identified in this notice must file a written notice of protest within 30 calendar days from the date of this publication with the Wyoming State Director at the above address. Any notice of protest received after the scheduled date of official filing will be untimely and will not be considered. A written statement of reasons in support of a protest, if not filed with the notice of protest, must be filed with the State Director within 30 calendar days after the notice of protest is filed. If a notice of protest against a plat of survey is received prior to the scheduled date of official filing, the official filing of the plat of survey identified in the notice of protest will be stayed pending consideration of the protest. A plat of survey will not be officially filed until the next business day following dismissal or resolution of all protests of the plat. Before including your address, phone number, email address, or other personal identifying information in your protest, you should be aware that your entire protest—including your personal identifying information—may be made publicly available at any time. While you can ask us to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Copies of the preceding described plat and field notes are available to the public at a cost of $4.20 per plat and $0.15 per page of field notes. Requests can be made to blm_wy_survey_ records@blm.gov or by telephone at 307–775–6222. (Authority: 43 U.S.C., Chapter 3) Dated: August 14, 2024. Sonja S. Sparks, Chief Cadastral Surveyor of Wyoming. [FR Doc. 2024–18518 Filed 8–16–24; 8:45 am] BILLING CODE 4331–26–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–602 and 731– TA–1412 (Review)] Steel Wheels From China; Scheduling of Expedited Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of expedited reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether revocation of the antidumping duty order and countervailing duty order on steel wheels from China would be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time. DATES : July 5, 2024. FOR FURTHER INFORMATION CONTACT : (Alec Resch 202–708–1448), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On July 5, 2024, the Commission determined that the domestic interested party group response to its notice of institution (89 FR 22451, April 1, 2024) of the subject five-year reviews was adequate and that the respondent interested party group response was inadequate. The Commission did not find any other circumstances that would warrant conducting full reviews. 1 Accordingly, the Commission determined that it would conduct expedited reviews pursuant to section 751(c)(3) of the Act (19 U.S.C. 1675(c)(3)). For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and VerDate Sep<11>2014 18:07 Aug 16, 2024 Jkt 262001 PO 00000 Frm 00046 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 67103Federal Register / Vol. 89, No. 160 / Monday, August 19, 2024 / Notices 2 The Commission has found the response submitted on behalf of Accuride Corporation to be individually adequate. Comments from other interested parties will not be accepted (see 19 CFR 207.62(d)(2)). Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Staff report.—A staff report containing information concerning the subject matter of the reviews has been placed in the nonpublic record, and will be made available to persons on the Administrative Protective Order service list for these reviews on September 25, 2024. A public version will be issued thereafter, pursuant to § 207.62(d)(4) of the Commission’s rules. Written submissions.—As provided in § 207.62(d) of the Commission’s rules, interested parties that are parties to the reviews and that have provided individually adequate responses to the notice of institution, 2 and any party other than an interested party to the reviews may file written comments with the Secretary on what determination the Commission should reach in the reviews. Comments are due on or before 5:15 p.m. on October 3, 2024 and may not contain new factual information. Any person that is neither a party to the five-year reviews nor an interested party may submit a brief written statement (which shall not contain any new factual information) pertinent to the reviews by October 3, 2024. However, should the Department of Commerce (‘‘Commerce’’) extend the time limit for its completion of the final results of its reviews, the deadline for comments (which may not contain new factual information) on Commerce’s final results is three business days after the issuance of Commerce’s results. If comments contain business proprietary information (BPI), they must conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Determination.—The Commission has determined this these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Act; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: August 14, 2024. Lisa Barton, Secretary to the Commission. [FR Doc. 2024–18513 Filed 8–16–24; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE [OMB 1140–0003] Agency Information Collection Activities; Proposed eCollection eComments Requested; Extension of a Previously Approved Collection; Report of Multiple Sale or Other Disposition of Pistols and Revolvers— ATF Form 3310.4 AGENCY : Bureau of Alcohol, Tobacco, Firearms and Explosives, Department of Justice. ACTION : 60-Day notice. SUMMARY : The Department of Justice (DOJ), The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), will be submitting the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995. DATES : Comments are encouraged and will be accepted for 60 days until October 18, 2024. FOR FURTHER INFORMATION CONTACT : If you have additional comments especially on the estimated public burden or associated response time, suggestions, or need a copy of the proposed information collection instrument with instructions or additional information, contact: Matthew Grim, NSC/NTC Division/ Tracing Operations & Records Management (TORM), either by mail at 244 Need Rd., Martinsburg, WV 25405, by email at matthew.grim@atf.gov, or telephone at 304–260–3683. SUPPLEMENTARY INFORMATION : Written comments and suggestions from the public and affected agencies concerning the proposed collection of information are encouraged. Your comments should address one or more of the following four points: —Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the Bureau of Justice Statistics, including whether the information will have practical utility; —Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; —Evaluate whether and if so how the quality, utility, and clarity of the information to be collected can be enhanced; and —Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Abstract: Title 18, United States Code 923 (g) (3) provides that ‘‘Each licensee shall prepare a report of multiple sales of other dispositions whenever the licensee sells or otherwise disposes of, at one time or during any five consecutive business days, two or more pistols, or revolvers, or any combination of pistols or revolvers totaling two or more, to an unlicensed person.’’ The report shall be prepared on ATF F 3310.4, Report of Multiple Sale or Other Disposition of Pistols and Revolvers. Overview of This Information Collection 1. Type of Information Collection: Extension of a previously approved collection. 2. The Title of the Form/Collection: Report of Multiple Sale or Other Disposition of Pistols and Revolvers. 3. The agency form number, if any, and the applicable component of the Department sponsoring the collection: Form number: ATF Form 3310.4. Component: Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of Justice. 4. Affected public who will be asked or required to respond, as well as the obligation to respond: Affected Public: State, local and tribal governments, Private Sector-for or not for profit institutions, Federal Government. The obligation to respond is mandatory per Title 18 U.S.C 923 (g)(3). 5. An estimate of the total number of respondents and the amount of time estimated for an average respondent to respond: An estimated 78,657 respondents will complete this form 8.247 times annually, and it will take each respondent approximately 15 minutes to complete their responses. 6. An estimate of the total annual burden (in hours) associated with the VerDate Sep<11>2014 18:07 Aug 16, 2024 Jkt 262001 PO 00000 Frm 00047 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - AD - China === 65314 Federal Register / Vol. 89, No. 154 / Friday, August 9, 2024 / Notices 1 See Certain Steel Wheels from the People’s Republic of China: Antidumping and Countervailing Duty Orders, 84 FR 24098 (May 24, 2019) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 89 FR 22373 (April 1, 2024). 3 Maxion was a previously petitioner under the corporate name Maxion Wheels Akron LLC. 4 See Petitioners’ Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review,’’ dated April 16, 2024. 5 See Petitioners’ Letter, ‘‘Petitioners’ Substantive Response to the Notice of Initiation,’’ dated May 1, 2024. 6 Id. 7 See Memorandum, ‘‘Tolling of Deadlines for Antidumping and Countervailing Duty Proceedings,’’ dated July 22, 2024. 8 See Memorandum, ‘‘Decision Memorandum for the Final Results of the Expedited Sunset Review of the Antidumping Duty Order on Certain Steel Wheels from the People’s Republic of China,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). DEPARTMENT OF COMMERCE International Trade Administration [A–570–082] Certain Steel Wheels From the People’s Republic of China: Final Results of Expedited Sunset Review of the Antidumping Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) finds that revocation of the antidumping duty (AD) order on certain steel wheels (steel wheels) from the People’s Republic of China (China) would be likely to lead to continuation or recurrence of dumping. The magnitude of the dumping margin likely to prevail is indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable August 9, 2024. FOR FURTHER INFORMATION CONTACT : Jacqueline Arrowsmith, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–5255. SUPPLEMENTARY INFORMATION : Background On May 24, 2019, Commerce published the AD Order on steel wheels from China. 1 On April 1, 2024, Commerce published the notice of initiation of the first five-year sunset review of the Order.2 On May 24, 2024, Commerce received a timely notice of intent to participate from Accuride Corporation (Accuride) and Maxion Wheels USA LLC (Maxion), 3 domestic interested parties (the petitioners), within the deadline specified in 19 CFR 351.218(d)(1)(i). 4 On May 1, 2024, Commerce received adequate substantive responses from the petitioners within the 30-day period specified in 19 CFR 351.218(d)(3)(i). 5 The petitioners claimed interested party status under section 771(9)(C) of the Tariff Act of 1930, as amended (the Act).6 We received no substantive responses from any respondent interested parties. As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of the Order, which was due on July 30, 2024. On July 22, 2024, Commerce tolled certain deadlines in this administrative proceeding by seven days. 7 The deadline for the preliminary results is now August 6, 2024. Scope of the Order The scope of the Order covers certain on the road steel wheels, discs, and rims for tubeless tires, with a nominal rim diameter of 22.5 inches and 24.5 inches, regardless of width. For a full description of the scope of the Order, see the Issues and Decision Memorandum. 8 Analysis of Comments Received All issues raised in this sunset review are addressed in the accompanying Issues and Decision Memorandum, which is hereby adopted by this notice. The issues discussed in the Issues and Decision Memorandum are listed as an appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access. trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 752(c)(1) and (3) of the Act, Commerce determines that revocation of the Order on steel wheels from China would be likely to lead to continuation or recurrence of dumping, and that the magnitude of the margin of dumping likely to prevail if the Order is revoked for steel wheels from China is up to 231.70 percent. Administrative Protective Order This notice also serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing the final results of this expedited sunset review in accordance with sections 751(c), 752(c), and 777(i) of the Act, and 19 CFR 351.218. Dated: August 5, 2024. Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of Dumping 1. Magnitude of the Margin of Dumping Likely To Prevail VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2024–17759 Filed 8–8–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–523–812] Circular Welded Carbon-Quality Steel Pipe From the Sultanate of Oman: Preliminary Results of Antidumping Duty Administrative Review; 2021– 2022 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily determines that Al Jazeera Steel Products Co. SAOG (Al Jazeera) sold subject merchandise at prices below normal value (NV) during the period of review (POR) December 1, 2021, through November 30, 2022. We invite interested parties to comment on these preliminary results. DATES : Applicable August 9, 2024. VerDate Sep<11>2014 19:21 Aug 08, 2024 Jkt 262001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\09AUN1.SGM 09AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - CVD - China === 65319Federal Register / Vol. 89, No. 154 / Friday, August 9, 2024 / Notices 14 See Fevisa’s Letter, ‘‘Request for Postponement of Final Determination,’’ dated July 24, 2024; and Owens Ame´rica’s Letter, ‘‘Glass Wine Bottles from Mexico—Owens Ame´rica, S. de R.L. de C.V.’s Request to Extend the Final Determination,’’ dated July 24, 2024. of publication of this notice. Requests should contain the party’s name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date. Postponement of Final Determination and Extension of Provisional Measures Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of Commerce’s regulations requires that a request by exporters for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration. On July 24, 2024, pursuant to 19 CFR 351.210(e), Fevisa and Owens Ame´rica requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months. 14 In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporter(s) account(s) for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination. U.S. International Trade Commission Notification In accordance with section 733(f) of the Act, Commerce will notify the U.S. International Trade Commission (ITC) of its preliminary determination. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry. Notification to Interested Parties This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c). Dated: August 2, 2024. Ryan Majerus, Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance. Appendix I Scope of the Investigation The merchandise covered by this investigation is certain narrow neck glass bottles, with a nominal capacity of 740 milliliters (25.02 ounces) to 760 milliliters (25.70 ounces); a nominal total height between 24.8 centimeters (9.75 inches) to 35.6 centimeters (14 inches); a nominal base diameter between 4.6 centimeters (1.8 inches) to 11.4 centimeters (4.5 inches); and a mouth with an outer diameter of between 25 millimeters (.98 inches) to 37.9 millimeters (1.5 inches); frequently referred to as a ‘‘wine bottle.’’ In scope merchandise may include but is not limited to the following shapes: Bordeaux (also known as ‘‘Claret’’), Burgundy, Hock, Champagne, Sparkling, Port, Provence, or Alsace (also known as ‘‘Germanic’’). In scope glass bottles generally have an approximately round base and have shapes including but not limited to, straight-sided, a tapered slope from shoulder (i.e., the sloping part of the bottle between the neck and the body) to base, or a long neck with sloping shoulders to a wider base. The scope includes glass bottles, whether or not clear, whether or not colored, with or without a punt (i.e., an indentation on the underside of the bottle), and with or without design or functional enhancements (including, but not limited to, embossing, labeling, or etching). In scope merchandise is made of non-‘‘free blown’’ glass, i.e., in scope merchandise is produced with the use of a mold and is distinguished by mold seams, joint marks, or parting lines. In scope merchandise is unfilled and may be imported with or without a closure, including a cork, stelvin (screw cap), crown cap, or wire cage and cork closure. Excluded from the scope of this investigation are: (1) glass containers made of borosilicate glass, meeting United States Pharmacopeia requirements for Type 1 pharmaceutical containers; and (2) glass containers without a ‘‘finish’’ (i.e., the section of a container at the opening including the lip and ring or collar, threaded or otherwise compatible with a type of closure, including but not limited to a cork, stelvin (screw cap), crown cap, or wire cage and cork closure). Glass bottles subject to this investigation are specified within the Harmonized Tariff Schedule of the United States (HTSUS) under subheading 7010.90.5019. The HTSUS subheading is provided for convenience and customs purposes only. The written description of the scope of this investigation is dispositive. Appendix II List of Topics Discussed in the Preliminary Decision Memorandum I. Summary II. Background III. Period of Investigation IV. Affiliation and Single Entity Treatment V. Application of Facts Available and Use of Adverse Inference VI. Discussion of the Methodology VII. Preliminary Negative Determination of Critical Circumstances VIII. Currency Conversion IX. Recommendation [FR Doc. 2024–17755 Filed 8–8–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–083] Certain Steel Wheels From the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) finds that revocation of the countervailing duty (CVD) order on certain steel wheels (steel wheels) from the People’s Republic of China (China) would be likely to lead to continuation or recurrence of countervailing subsidies at the levels indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable August 9, 2024. FOR FURTHER INFORMATION CONTACT : Jacqueline Arrowsmith, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–5255. SUPPLEMENTARY INFORMATION : Background On May 24, 2019, Commerce published in the Federal Register the VerDate Sep<11>2014 19:21 Aug 08, 2024 Jkt 262001 PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 E:\FR\FM\09AUN1.SGM 09AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 65320 Federal Register / Vol. 89, No. 154 / Friday, August 9, 2024 / Notices 1 See Certain Steel Wheels from the People’s Republic of China: Antidumping and Countervailing Duty Orders, 84 FR 24098 (May 24, 2019) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 89 FR 22373 (April 1, 2024) (Initiation Notice). 3 Maxion was a petitioner under the corporate name Maxion Wheels Akron LLC. (Maxion ceased U.S. production of 22.5″ and 24.5″ wheels in 2020 when it closed its Akron plant.) 4 See Petitioners’ Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review, dated April 16, 2024. 5 See Petitioners’ Letter, ‘‘Petitioners’ Substantive Response to the Notice of Initiation,’’ dated May 1, 2024. 6 See Commerce’s Letter, ‘‘Sunset Reviews for April 2024,’’ dated May 22, 2024. 7 See Memorandum, ‘‘Tolling of Deadlines for Antidumping and Countervailing Duty Proceedings,’’ dated July 22, 2024. 8 See Memorandum, ‘‘Decision Memorandum for the Final Results of the Expedited Sunset Review of the Countervailing Duty Order on Steel Wheels from China,’’ dated concurrently with and adopted by this notice (Issues and Decision Memorandum). 1 See Antidumping or Countervailing Duty Order, Finding or Suspended Investigation; Opportunity to CVD order on Steel Wheels from China.1 On April 1, 2024, Commerce initiated the first sunset review of the Order, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).2 On April 16, 2024, Commerce received timely filed notices of intent to participate from Accuride and Maxion 3 (the petitioners) within the deadline specified in 19 CFR 351.218(d)(1)(i). 4 The petitioners claimed interested party status under section 771(9)(C) of the Act as a producer and importer of the domestic like product. On May 1, 2024, Commerce received an adequate substantive response to the Initiation Notice from the petitioners within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). 5 We received no substantive responses from any other interested parties, including the Government of China. On May 22, 2024, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties.6 As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(B)–(C), Commerce conducted an expedited (120-day) sunset review of the Order, which made the deadline July 30, 2024. On July 22, 2024, Commerce tolled certain deadlines in this administrative proceeding by seven days. 7 The deadline for these expedited final results of sunset review is now August 6, 2024. Scope of the Order The scope of the Order covers certain on the road steel wheels, discs, and rims for tubeless tires, with a nominal rim diameter of 22.5 inches and 24.5 inches, regardless of width. For a complete description of the scope of the Order, see the Issues and Decision Memorandum. 8 Analysis of Comments Received All issues raised in this sunset review are addressed in the accompanying Issues and Decision Memorandum, which is hereby adopted by this notice. The issues discussed in the Issues and Decision Memorandum are listed as an appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access. trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Order would likely lead to continuation or recurrence of countervailable subsidy at the rates listed below. Exporter/producer Net subsidy rate (percent) Xiamen Sunrise Wheel Group Co., Ltd ................................... 457.10 Zhejiang Jingu Company Limited 457.10 All-Others .................................... 457.10 Administrative Protective Order (APO) This notice serves as the only reminder to interested parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing these final results and notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act and 19 CFR 351.218. Dated: August 5, 2024. Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Rate Likely To Prevail 3. Nature of the Subsidies VII. Final Results of Review VIII. Recommendation [FR Doc. 2024–17761 Filed 8–8–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–549–842] Passenger Vehicle and Light Truck Tires From Thailand: Preliminary Results and Rescission, in Part, of Antidumping Duty Administrative Review; 2022–2023 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily determines that passenger vehicle and light truck tires (PVLT) from Thailand were sold in the United States at less than normal value during the period of review (POR) July 1, 2022, through June 30, 2023. Interested parties are invited to comment on these preliminary results. DATES : Applicable August 9, 2024. FOR FURTHER INFORMATION CONTACT : Myrna Lobo or Jacob Saude, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–2371 or (202) 482–0981, respectively. SUPPLEMENTARY INFORMATION : Background On July 3, 2023, Commerce published in the Federal Register a notice of opportunity 1 to request an VerDate Sep<11>2014 19:21 Aug 08, 2024 Jkt 262001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\09AUN1.SGM 09AUN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Determination === 88061Federal Register / Vol. 89, No. 215 / Wednesday, November 6, 2024 / Notices 3 The Commission has found the response submitted on behalf of the Laminated Woven Sacks Fair Trade Coalition to be individually adequate. Comments from other interested parties will not be accepted (see 19 CFR 207.62(d)(2)). 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Staff report.—A staff report containing information concerning the subject matter of the reviews has been placed in the nonpublic record, and will be made available to persons on the Administrative Protective Order service list for these reviews on December 18, 2024. A public version will be issued thereafter, pursuant to § 207.62(d)(4) of the Commission’s rules. Written submissions.—As provided in § 207.62(d) of the Commission’s rules, interested parties that are parties to the reviews and that have provided individually adequate responses to the notice of institution, 3 and any party other than an interested party to the reviews may file written comments with the Secretary on what determination the Commission should reach in the reviews. Comments are due on or before 5:15 p.m. on December 26, 2024, and may not contain new factual information. Any person that is neither a party to the five-year reviews nor an interested party may submit a brief written statement (which shall not contain any new factual information) pertinent to the reviews by December 26, 2024. However, should the Department of Commerce (‘‘Commerce’’) extend the time limit for its completion of the final results of its reviews, the deadline for comments (which may not contain new factual information) on Commerce’s final results is three business days after the issuance of Commerce’s results. If comments contain business proprietary information (BPI), they must conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Determination.—The Commission has determined these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Act; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: November 1, 2024. Lisa Barton, Secretary to the Commission. [FR Doc. 2024–25772 Filed 11–5–24; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–602 and 731– TA–1412 (Review)] Steel Wheels From China; Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing and antidumping duty orders on steel wheels from China would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on April 1, 2024 (89 FR 22451), and determined on July 5, 2024, that it would conduct expedited reviews (89 FR 67102, August 19, 2024). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on October 31, 2024. The views of the Commission are contained in USITC Publication 5557 (October 2024), entitled Steel Wheels from China: Investigation Nos. 701–TA– 602 and 731–TA–1412 (Review). By order of the Commission. Issued: October 31, 2024. Lisa Barton, Secretary to the Commission. [FR Doc. 2024–25749 Filed 11–5–24; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–701 and 731– TA–1659 (Final)] Frozen Warmwater Shrimp From Indonesia and Ecuador; Termination of Investigations AGENCY : United States International Trade Commission. ACTION : Notice. On October 28, 2024, the Department of Commerce published notices in the Federal Register of a negative final countervailing duty determination in connection with the subject investigation concerning Indonesia and of a negative final determination of sales at less than fair value in connection with the subject investigation concerning Ecuador (89 FR 85512 and 89 FR 85508). Accordingly, the U.S. International Trade Commission’s countervailing duty investigation concerning frozen warmwater shrimp from Indonesia (Investigation No. 701– TA–701 (Final)) and its antidumping duty investigation concerning frozen warmwater shrimp from Ecuador (Investigation No. 731–TA–1659 (Final)) are terminated. DATES : October 28, 2024. FOR FURTHER INFORMATION CONTACT : Calvin Chang (202–205–3062), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired individuals are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these investigations may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. Authority: These investigations are being terminated under authority of title VII of the Tariff Act of 1930 and pursuant to section 207.40(a) of the Commission’s Rules of Practice and Procedure (19 CFR 207.40(a)). This notice is published pursuant to section 201.10 of the Commission’s rules (19 CFR 201.10). By order of the Commission. VerDate Sep<11>2014 16:22 Nov 05, 2024 Jkt 265001 PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 E:\FR\FM\06NON1.SGM 06NON1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Continuation - AD/CVD - China === 90665Federal Register / Vol. 89, No. 222 / Monday, November 18, 2024 / Notices 1 See Certain Steel Wheels from the People’s Republic of China: Antidumping and Countervailing Duty Orders, 84 FR 24098 (May 24, 2019)) (collectively, the Orders). 2 See Steel Wheels from China; Institution of Five- Year Reviews, 89 FR 22451 (April 1, 2024). 3 See Initiation of Five-Year (Sunset) Reviews, 89 FR 22373 (April 1, 2024). 4 See Certain Steel Wheels from the People’s Republic of China: Final Results of Expedited Sunset Review of the Antidumping Duty Order, 89 Continued DEPARTMENT OF COMMERCE Census Bureau Agency Information Collection Activities; Submission to the Office of Management and Budget (OMB) for Review and Approval; Comment Request; Construction Progress Reporting Surveys The Department of Commerce will submit the following information collection request to the Office of Management and Budget (OMB) for review and clearance in accordance with the Paperwork Reduction Act of 1995, on or after the date of publication of this notice. We invite the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. Public comments were previously requested via the Federal Register on July 16, 2024 during a 60-day comment period. This notice allows for an additional 30 days for public comments. Agency: U.S. Census Bureau, Department of Commerce. Title: Construction Progress Reporting Surveys. OMB Control Number: 0607–0153. Form Number(s): C–700, C–700R, C– 700SL, C–700F. Type of Request: Regular submission, Request for an Extension, without Change, of a Currently Approved Collection. Number of Respondents: 22,000 respondents report monthly over the duration of the construction project (an average of 12 months). Average Hours per Response: 30 minutes for month 1; 10 minutes for months 2 through 12. Burden Hours: 51,333. Needs and Uses: The U.S. Census Bureau is requesting an extension of a currently approved collection for forms: C–700, for Private Construction Projects; C–700(R), for Multifamily Residential Projects; C–700(SL), for State and Local Governments Projects; and C–700(F), for Federal Government Projects. These forms are used to conduct the Construction Progress Reporting Surveys (CPRS) which collect information on the dollar value of construction put in place on non- residential building projects under construction by private companies or individuals, private multifamily residential buildings, and building projects under construction by federal and state and local governments. The Census Bureau uses the information collected on these forms to publish estimates of the monthly dollar value of construction put in place. Statistics from the CPRS become part of the monthly ‘‘Value of Construction Put in Place’’ or ‘‘Construction Spending’’ series, a Principal Economic Indicator that is used extensively by the federal government in making policy decisions and is used by the Bureau of Economic Analysis (BEA) to estimate the gross domestic product (GDP). The private sector uses the statistics for market analysis and other research. Construction now accounts for 7.4 percent of GDP. Published estimates are used by a variety of private business and trade associations to estimate the demand for building materials and to schedule production, distribution, and sales efforts. They also provide various government agencies with a tool to evaluate economic policy. For example, Bureau of Economic Analysis staff use data to develop the construction components of gross private domestic investment in the gross domestic product. The Federal Reserve Board and the Department of the Treasury use the value put in place data to predict the gross domestic product, which is presented to the Board of Governors and has an impact on monetary policy. Frequency: Monthly. Respondent’s Obligation: Voluntary. Legal Authority: Title 13 U.S.C., Sections 131 and 182. This information collection request may be viewed at www.reginfo.gov. Follow the instructions to view the Department of Commerce collections currently under review by OMB. Written comments and recommendations for the proposed information collection should be submitted within 30 days of the publication of this notice on the following website www.reginfo.gov/ public/do/PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function and entering either the title of the collection or the OMB Control Number 0607–0153. Sheleen Dumas, Departmental PRA Clearance Officer, Office of the Under Secretary for Economic Affairs, Commerce Department. [FR Doc. 2024–26802 Filed 11–15–24; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–082, C–570–083] Certain Steel Wheels From the People’s Republic of China: Continuation of Antidumping Duty and Countervailing Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) and countervailing duty (CVD) orders on certain steel wheels (steel wheels) from the People’s Republic of China (China) would likely lead to a continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD and CVD orders. DATES : Applicable November 6, 2024. FOR FURTHER INFORMATION CONTACT : Jacqueline Arrowsmith, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–5255. SUPPLEMENTARY INFORMATION : Background On May 24, 2019, Commerce published the AD and CVD orders on steel wheels from China. 1 On April 1, 2024, the ITC instituted, 2 and Commerce initiated, 3 the second sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to continuation or recurrence of dumping and/or countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and net countervailable subsidy rates likely to prevail should the Orders be revoked.4 VerDate Sep<11>2014 17:17 Nov 15, 2024 Jkt 265001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\18NON1.SGM 18NON1 lotter on DSK11XQN23PROD with NOTICES1 90666 Federal Register / Vol. 89, No. 222 / Monday, November 18, 2024 / Notices FR 65314, (August 9, 2024); see also Certain Steel Wheels from the People’s Republic of China: Final Results of Expedited Sunset Review of the Countervailing Duty Order, 89 FR 65319 (August 9, 2024). 5 See Steel Wheels from China; Determinations, 89 FR 88061 (November 6, 2024). On November 6, 2024, the ITC published its determination pursuant to sections 751(c) and 752(a) of the Act that revocation of the Orders would likely lead to the continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 5 Scope of the Orders The scope of the Orders covers certain on the road steel wheels, discs, and rims for tubeless tires, with a nominal rim diameter of 22.5 inches and 24.5 inches, regardless of width. Certain on-the-road steel wheels with a nominal wheel diameter of 22.5 inches and 24.5 inches are generally for Class 6, 7, and 8 commercial vehicles (as classified by the Federal Highway Administration Gross Vehicle Weight Rating system), including tractors, semi-trailers, dump trucks, garbage trucks, concrete mixers, and buses, and are the current standard wheel diameters for such applications. The standard widths of certain on-the- road steel wheels are 7.5 inches, 8.25 inches, and 9.0 inches, but all certain on-the-road steel wheels, regardless of width, are covered by the scope. While 22.5 inches and 24.5 inches are standard wheel sizes used by Class 6, 7, and 8 commercial vehicles, the scope covers sizes that may be adopted in the future for Class 6, 7, and 8 commercial vehicles. The scope includes certain on-the- road steel wheels with either a ‘‘hub- piloted’’ or ‘‘stud- piloted’’ mounting configuration, and includes rims and discs for such wheels, whether imported as an assembly or separately. The scope includes certain on the road steel wheels, discs, and rims, of carbon and/ or alloy steel composition, whether cladded or not cladded, whether finished or not finished, and whether coated or uncoated. All on-the-road wheels sold in the United States are subject to the requirements of the National Highway Traffic Safety Administration and bear markings, such as the ‘‘DOT’’ symbol, indicating compliance with applicable motor vehicle standards. See 49 CFR 571.120. The scope includes certain on-the-road steel wheels imported with or without the required markings. Certain on-the- road steel wheels imported as an assembly with a tire mounted on the wheel and/or with a valve stem attached are included. However, if the certain on- the-road steel wheel is imported as an assembly with a tire mounted on the wheel and/or with a valve stem attached, the certain on-the-road steel wheel is covered by the scope, but the tire and/or valve stem is not covered by the scope. The scope includes rims and discs that have been further processed in a third country, including, but not limited to, the welding and painting of rims and discs from China to form a steel wheel, or any other processing that would not otherwise remove the merchandise from the scope of the proceeding if performed in China. Excluded from the scope are: (1) Steel wheels for tube-type tires that require a removable side ring; (2) Aluminum wheels; (3) Wheels where steel represents less than fifty percent of the product by weight; and (4) Steel wheels that do not meet National Highway Traffic Safety Administration requirements, other than the rim marking requirements found in 49 CFR 571.120S5.2. Imports of the subject merchandise are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 8708.70.4530, 8708.70.4560, 8708.70.6030, 8708.70.6060, and 8716.90.5059. Merchandise meeting the scope description may also enter under the following HTSUS subheadings: 4011.20.1015, 4011.20.5020, and 8708.99.4850. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the Orders is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to a continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of these Orders is November 6, 2024. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next sunset review of these Orders no later than 30 days prior to the fifth anniversary of the date of the last determination by the ITC. Administrative Protective Order (APO) This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) and 751(d)(2) of the Act, and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: November 12, 2024. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. [FR Doc. 2024–26768 Filed 11–15–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Renewable Energy and Energy Efficiency Advisory Committee AGENCY : International Trade Administration, U.S. Department of Commerce. ACTION : Notice of an open meeting. SUMMARY : The Renewable Energy and Energy Efficiency Advisory Committee (REEEAC or the Committee) will hold a virtual meeting, accessible to the public online, on Tuesday, December 3, 2024 at the U.S. Department of Commerce in Washington, DC. Registration instructions for the public to attend virtually are provided below. DATES : Tuesday, December 3, 2024, from approximately 9:30 a.m. to 12 p.m. Eastern Standard Time (EST). Members of the public wishing to participate must register in advance with the Designated Federal Officer (DFO), Cora Dickson, at the contact information below by 5 p.m. EST on Monday December 2, 2024, including any requests to make comments during the meeting or for accommodations or auxiliary aids. ADDRESSES : To register, please contact Cora Dickson, DFO, Office of Energy and Environmental Industries, Industry VerDate Sep<11>2014 17:17 Nov 15, 2024 Jkt 265001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\18NON1.SGM 18NON1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Initiation === 22373Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices 3 The companies not selected for individual review are listed in Appendix II. 4 See Order; and Utility Scale Wind Towers from Canada, Indonesia, the Republic of Korea, and the Socialist Republic of Vietnam: Notice of Correction to the Antidumping Duty Orders, 85 FR 56213 (September 11, 2020) (correcting the date that the provisional measures period expired). For a full discussion of the ‘‘automatic assessment’’ practice, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). 5 See section 751(a)(2)(C) of the Act. suspended entries that entered under Hyosung’s and CS Wind’s AD case numbers (i.e., at that exporter’s rate), at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. Final Results of Review We determine that the following weighted-average dumping margins exist for the period August 1, 2021, through July 31, 2022: Producer/exporter Weighted- average dumping margin (percent) Dongkuk S&C Co., Ltd ......... 1.95 Companies Not Selected for Individual Review 3 ............ 1.95 Assessment Rates Pursuant to section 751(a)(2)(C) of the Act, and 19 CFR 351.212(b)(1), Commerce has determined, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review. Pursuant to 19 CFR 351.212(b)(1), Dongkuk S&C Co., Ltd. (Dongkuk) reported the entered value of its U.S. sales such that we calculated importer- specific ad valorem duty assessment rates based on the ratio of the total amount of dumping calculated for the examined sales to the total entered value of the sales for which entered value was reported. Where either the respondent’s weighted-average dumping margin is zero or de minimis within the meaning of 19 CFR 351.106(c)(1), or an importer-specific assessment rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties. Commerce’s ‘‘automatic assessment’’ practice will apply to entries of subject merchandise during the POR produced by Dongkuk for which the company did not know that the merchandise it sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all- others rate of 5.41 percent if there is no rate for the intermediate company(ies) involved in the transaction.4 For the companies not selected for individual review, we used an assessment rate based on the cash deposit rate calculated for Dongkuk. The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for the future deposits of estimated duties where applicable. 5 Commerce intends to issue liquidation instructions to CBP no earlier than 35 days after the date of publication of the final results of this review in the Federal Register. If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired (i.e., within 90 days of publication). Notification to Interested Parties This notice is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Tariff Act of 1930, as amended. Dated: March 26, 2024. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. Appendix II Review-Specific Rate Applicable to Companies Not Selected for Individual Review 1. CS Wind China Co., Ltd. 2. CS Wind Malaysia Sdn. Bhd. 3. CS Wind Taiwan Ltd. 4. CS Wind Turkey Kule Imalati A.S. 5. CS Wind UK Limited 6. CS Wind Vietnam Co., Ltd. 7. Enercon Korea Inc. 8. GE Renewable Energy 9. Nordex SE 10. Siemens Gamesa Renewable Energy Limited 11. Vestas Korea 12. Vestas Korea Wind Technology Ltd. [FR Doc. 2024–06835 Filed 3–29–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In accordance with the Tariff Act of 1930, as amended (the Act), the U.S. Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping duty (AD) and countervailing duty (CVD) order(s) and suspended investigation(s) listed below. The U.S. International Trade Commission (ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable April 1, 2024. FOR FURTHER INFORMATION CONTACT : Commerce official identified in the Initiation of Review section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Act and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following AD and CVD order(s) and suspended investigation(s): VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1 22374 Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Notices 1 See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 2023) 2 See 19 CFR 351.218(d)(1)(iii). DOC case No. ITC case No. Country Product Commerce contact A–570–079 ... 731–TA–1407 .................... China ....... Cast Iron Soil Pipe (1st Review) .................................... Thomas Martin (202) 482– 3936. A–201–842 ... 731–TA–1200 .................... Mexico ..... Large Residential Washers (2nd Review) ..................... Mary Kolberg (202) 482– 1785. A–570–082 ... 731–TA–1412 .................... China ....... Steel Wheels (1st Review) ............................................. Jacqueline Arrowsmith (202) 482–5255. A–570–981 ... 731–TA–1195 .................... China ....... Utility Wind Towers (2nd Review) .................................. Thomas Martin (202) 482– 3936. A–552–863 ... 731–TA–1196 .................... Vietnam ... Utility Wind Towers (2nd Review) .................................. Thomas Martin (202) 482– 3936. C–570–080 .. 701–TA–597 ...................... China ....... Cast Iron Soil Pipe (1st Review) .................................... Thomas Martin (202) 482– 3936. C–570–083 .. 701–TA–602 ...................... China ....... Steel Wheels (1st Review) ............................................. Jacqueline Arrowsmith (202) 482–5255. C–570–982 .. 701–TA–486 ...................... China ....... Utility Wind Towers (2nd Review) .................................. Mary Kolberg (202) 482– 1785. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at https://enforcement.trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).1 Information Required From Interested Parties Domestic interested parties, as defined in sections 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct from the ITC ’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR part 351 for definitions of terms and for other general information concerning AD and CVD proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: March 22, 2024. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2024–06793 Filed 3–29–24; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–552–838] Frozen Warmwater Shrimp From the Socialist Republic of Vietnam: Preliminary Affirmative Countervailing Duty Determination, and Alignment of Final Determination With Final Antidumping Duty Determination AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of frozen VerDate Sep<11>2014 17:17 Mar 29, 2024 Jkt 262001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\01APN1.SGM 01APN1 ddrumheller on DSK120RN23PROD with NOTICES1