ITC Investigation 701-TA-575 is a U.S. International Trade Commission antidumping (AD) proceeding on Tool Chests and Cabinets from China and Vietnam; Inv. No. 701-TA-575 and 731-TA-1360-1361 (Review) from Vietnam and China. It's in the review phase and currently in completed status. Commerce initiated the underlying investigation on December 1, 2022. It links to AD/CVD case A-552-821 — see the linked order for the active deposit rate, scope text, and Federal Register citation.
Phase, parties, documents, and full text from USITC IDS
Tool Chests and Cabinets from China and Vietnam; Inv. No. 701-TA-575 and 731-TA-1360-1361 (Review)
ITC sunset review completed — order continued.
Parties
Documents
Full text (151,850 chars)
=== USITC Institution === 73786 Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2021, except as noted (report quantity data in square feet and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in square feet and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject Merchandise imported from the Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from the Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in square feet and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in the Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in the Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in the Subject Country after 2016, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in the Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: November 23, 2022. Jessica Mullan, Acting Supervisory Attorney. [FR Doc. 2022–26048 Filed 11–30–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–575 and 731– TA–1360–1361 (Review)] Tool Chests and Cabinets From China and Vietnam; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing duty order on tool chests and cabinets from China and the antidumping duty orders on tool chests and cabinets from China and Vietnam would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted December 1, 2022. To be assured of consideration, the deadline for responses is January 3, 2023. Comments on the adequacy of responses may be filed with the Commission by February 13, 2023. VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00045 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 73787Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices FOR FURTHER INFORMATION CONTACT : Alejandro Orozco (202–205–3177), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On January 24, 2018, the Department of Commerce (‘‘Commerce’’) issued a countervailing duty order on imports of certain tool chests and cabinets from China (83 FR 3299). On June 4, 2018, Commerce issued antidumping duty orders on imports of certain tool chests and cabinets from China and Vietnam (83 FR 25645). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Countries in these reviews are China and Vietnam. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, the Commission defined a single Domestic Like Product consisting of tool chests, coextensive with Commerce’s scope. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, the Commission defined the Domestic Industry to include all domestic producers of in-scope tool chests. (5) The Order Dates are the dates that the orders under review became effective. In these reviews, the Order Dates are January 24, 2018 (countervailing duty order) and June 4, 2018 (antidumping duty orders). (6) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is January 3, 2023. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct expedited or full reviews. The deadline for filing such comments is February 13, 2023. All written submissions must conform with the VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00046 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 73788 Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 22–5–549, expiration date June 30, 2023. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determinations in the reviews. Information to be Provided in Response to this Notice of Institution: If you are a domestic producer, union/ worker group, or trade/business association; import/export Subject Merchandise from more than one Subject Country; or produce Subject Merchandise in more than one Subject Country, you may file a single response. If you do so, please ensure that your response to each question includes the information requested for each pertinent Subject Country. As used below, the term ‘‘firm’’ includes any related firms. Those responding to this notice of institution are encouraged, but not required, to visit the USITC’s website for this proceeding at https:// www.usitc.gov/investigations/701731/ 2022/tool_chests_and_cabinets_china_ and_vietnam/adequacy.htm and download and complete the ‘‘NOI worksheet’’ Excel form, to be included as attachment/exhibit 1 of your overall response. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in § 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in each Subject Country that currently export or have exported Subject Merchandise to the United States or other countries since the Order Dates. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and Email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2021, except as noted (report quantity data in units and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/ business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00047 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 73789Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in units and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject Merchandise imported from each Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from each Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in units and value data in U.S. dollars, landed and duty- paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in each Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in each Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in each Subject Country since the Order Dates, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in each Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: November 23, 2022. Jessica Mullan, Acting Supervisory Attorney. [FR Doc. 2022–26050 Filed 11–30–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–573–574 and 731–TA–1349–1358 (Review)] Carbon and Certain Alloy Steel Wire Rod From Belarus, Italy, Russia, South Africa, South Korea, Spain, Turkey, Ukraine, the United Arab Emirates, and the United Kingdom; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing duty orders on carbon and certain alloy steel wire rod (‘‘wire rod’’) from Italy and Turkey and the antidumping duty orders on wire rod from Belarus, Italy, Russia, South Africa, South Korea, Spain, Turkey, Ukraine, the United Arab Emirates, and the United Kingdom would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted December 1, 2022. To be assured of consideration, the deadline for responses is January 3, 2023. Comments on the adequacy of responses may be filed with the Commission by February 9, 2023. FOR FURTHER INFORMATION CONTACT : Peter Stebbins (202–205–2039), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On January 24, 2018, the Department of Commerce (‘‘Commerce’’) issued antidumping duty orders on imports of wire rod from Belarus, Russia, and the United Arab Emirates (83 FR 3297, corrected 83 FR 5402, February 7, 2018). On March 14, 2018, Commerce issued antidumping duty orders on imports of wire rod from South Africa and Ukraine (83 FR 11175). On May 21, 2018, Commerce issued countervailing duty orders on imports of wire rod from Italy and Turkey (83 FR 23420) and antidumping duty orders on imports of wire rod from Italy, South Korea, Spain, Turkey, and the United Kingdom (83 FR 23417). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00048 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Continuation - AD/CVD - China - Vietnam === 44274 Federal Register / Vol. 88, No. 132 / Wednesday, July 12, 2023 / Notices 11 See Certification of Factual Information To Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule); see also the frequently asked questions regarding the Final Rule, available at https://enforcement.trade.gov/tlei/notices/factual_ info_final_rule_FAQ_07172013.pdf. 12 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19, 85 FR 41363 (July 10, 2020). 13 See section 782(b) of the Act; see also Final Rule; and the frequently asked questions regarding the Final Rule, available at https://enforcement. trade.gov/tlei/notices/factual_info_final_rule_FAQ_ 07172013.pdf. 14 See 19 CFR 351.302. 1 See Certain Tool Chests and Cabinets from the People’s Republic of China: Countervailing Duty Order, 83 FR 3299 (January 24, 2018) (CVD Order). 2 See Certain Tool Chests and Cabinets from the People’s Republic of China and the Socialist Republic of Vietnam: Antidumping Duty Orders, 83 FR 25645 (June 4, 2018) (AD Orders). 3 See Tool Chests and Cabinets from China and Vietnam; Institution of Five-Year Reviews, 87 FR 73786 (December 1, 2022). 4 See Initiation of Five-Year (Sunset) Reviews, 87 FR 73757 (December 1, 2022) (Initiation Notice). 5 See Certain Tool Chests and Cabinets from the People’s Republic of China and the Socialist Republic of Vietnam: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 88 FR 15667 (March 14, 2023) (Tool Chests and Cabinets from China and Vietnam AD), and accompanying Issues and Decision Memorandum (IDM); and Certain Tool Chests and Cabinets from the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 88 FR 19065 (March 30, 2023) (Tool Chests and Cabinets from China CVD), and accompanying IDM. evidence other than factual information described in (i)–(iv). These regulations require any party, when submitting factual information, to specify under which subsection of 19 CFR 351.102(b)(21) the information is being submitted and, if the information is submitted to rebut, clarify, or correct factual information already on the record, to provide an explanation identifying the information already on the record that the factual information seeks to rebut, clarify, or correct. The regulations, at 19 CFR 351.301, also provide specific time limits for such factual submissions based on the type of factual information being submitted. Please review the Final Rule,11 available at https://www.govinfo.gov/content/pkg/ FR-2013-07-17/pdf/2013-17045.pdf, prior to submitting factual information in this segment. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice. 12 Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information using the formats provided at the end of the Final Rule.13 Commerce intends to reject factual submissions in any proceeding segments if the submitting party does not comply with applicable certification requirements. Extension of Time Limits Regulation Parties may request an extension of time limits before a time limit established under Part 351 expires, or as otherwise specified by Commerce. 14 In general, an extension request will be considered untimely if it is filed after the time limit established under Part 351 expires. For submissions which are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. on the due date. Examples include, but are not limited to: (1) case and rebuttal briefs, filed pursuant to 19 CFR 351.309; (2) factual information to value factors under 19 CFR 351.408(c), or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2), filed pursuant to 19 CFR 351.301(c)(3) and rebuttal, clarification and correction filed pursuant to 19 CFR 351.301(c)(3)(iv); (3) comments concerning the selection of a surrogate country and surrogate values and rebuttal; (4) comments concerning CBP data; and (5) Q&V questionnaires. Under certain circumstances, Commerce may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, Commerce will inform parties in the letter or memorandum setting forth the deadline (including a specified time) by which extension requests must be filed to be considered timely. This policy also requires that an extension request must be made in a separate, stand-alone submission, and clarifies the circumstances under which Commerce will grant untimely-filed requests for the extension of time limits. Please review the Final Rule, available at https:// www.gpo.gov/fdsys/pkg/FR-2013-09-20/ html/2013-22853.htm, prior to submitting factual information in these segments. These initiations and this notice are in accordance with section 751(a) of the Act (19 U.S.C. 1675(a)) and 19 CFR 351.221(c)(1)(i). Dated: July 6, 2023. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2023–14753 Filed 7–11–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–056, A–552–821, C–570–057] Certain Tool Chests and Cabinets From the People’s Republic of China and the Socialist Republic of Vietnam: Continuation of Antidumping Duty Orders and Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) orders on certain tool chests and cabinets (tool chests and cabinets) from the People’s Republic of China (China) and from the Socialist Republic of Vietnam (Vietnam), and the countervailing duty (CVD) order on tool chests and cabinets from China would likely lead to the continuation or recurrence of dumping, and countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD and CVD orders. DATES : Applicable July 12, 2023. FOR FURTHER INFORMATION CONTACT : Claudia Cott, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4270. SUPPLEMENTARY INFORMATION : Background On January 24, 2018, Commerce published in the Federal Register the CVD order on tool chests and cabinets from China. 1 On June 4, 2018, Commerce published the AD orders on tool chests and cabinets from China and Vietnam.2 On December 1, 2022, the ITC instituted, 3 and Commerce initiated, 4 the first sunset review of the AD Orders and the CVD Order (collectively, Orders), pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and subsidy rates likely to prevail should the Orders be revoked. 5 On July 7, 2023, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of VerDate Sep<11>2014 17:29 Jul 11, 2023 Jkt 259001 PO 00000 Frm 00025 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1 lotter on DSK11XQN23PROD with NOTICES1 44275Federal Register / Vol. 88, No. 132 / Wednesday, July 12, 2023 / Notices 6 See Tool Chests and Cabinets from China and Vietnam, 88 FR 43399 (July 7, 2023) (ITC Final Determination). 7 See also Tool Chests and Cabinets from China and Vietnam AD Orders, 83 FR at 25646–47; and Tool Chests and Cabinets from China CVD Order, 83 FR at 3300–01. 8 See ITC Final Determination. material injury to an industry in the United States within a reasonably foreseeable time. 6 Scope of the Orders The scope of the Orders covers certain metal tool chests and tool cabinets, with drawers, from China (AD/CVD) and Vietnam (AD). For a complete description of the scope of the Orders, see Appendix I and II to this notice.7 Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders is July 7, 2023. 8 Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to the fifth anniversary of the date of the last determination by the Commission. Administrative Protective Order (APO) This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4). Dated: July 7, 2023. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix I Scope of the AD Orders The scope of these orders covers certain metal tool chests and tool cabinets, with drawers, (tool chests and cabinets), from the People’s Republic of China (China) and the Socialist Republic of Vietnam (Vietnam). The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics: (1) a body made of carbon, alloy, or stainless steel and/or other metals; (2) two or more drawers for storage in each individual unit; (3) a width (side to side) exceeding 15 inches for side cabinets and exceeding 21 inches for all other individual units but not exceeding 60 inches; (4) a body depth (front to back) exceeding 10 inches but not exceeding 24 inches; and (5) prepackaged for retail sale. For purposes of this scope, the width parameter applies to each individual unit, i.e., each individual top chest, intermediate top chest, tool cabinet, side cabinet, storage unit, mobile work bench, and work station. Prepackaged for retail sale means the units may, for example, be packaged in a cardboard box, other type of container or packaging, and may bear a Universal Product Code, along with photographs, pictures, images, features, artwork, and/or product specifications. Subject tool chests and cabinets are covered whether imported in assembled or unassembled form. Subject merchandise includes tool chests and cabinets produced in China or Vietnam but assembled, prepackaged for retail sale, or subject to other minor processing in a third country prior to importation into the United States. Similarly, it would include tool chests and cabinets produced in China or Vietnam that are assembled, prepackaged for retail sale, or subject to other minor processing after importation into the United States. Subject tool chests and cabinets may also have doors and shelves in addition to drawers, may have handles (typically mounted on the sides), and may have a work surface on the top. Subject tool chests and cabinets may be uncoated (e.g., stainless steel), painted, powder coated, galvanized, or otherwise coated for corrosion protection or aesthetic appearance. Subject tool chests and cabinets may be packaged as individual units or in sets. When packaged in sets, they typically include a cabinet with one or more chests that stack on top of the cabinet. Tool cabinets act as a base tool storage unit and typically have rollers, casters, or wheels to permit them to be moved more easily when loaded with tools. Work stations and mobile work benches are tool cabinets with a work surface on the top that may be made of rubber, plastic, metal, wood, or other materials. Top chests are designed to be used with a tool cabinet to form a tool storage unit. The top chests may be mounted on top of the base tool cabinet or onto an intermediate chest. They are often packaged as a set with tool cabinets or intermediate chests, but may also be packaged separately. They may be packaged with mounting hardware (e.g., bolts) and instructions for assembling them onto the base tool cabinet or onto an intermediate tool chest which rests on the base tool cabinet. Smaller top chests typically have handles on the sides, while the larger top chests typically lack handles. Intermediate tool chests are designed to fit on top of the floor standing tool cabinet and to be used underneath the top tool chest. Although they may be packaged or used separately from the tool cabinet, intermediate chests are designed to be used in conjunction with tool cabinets. The intermediate chests typically do not have handles. The intermediate and top chests may have the capability of being bolted together. Side cabinets are designed to be bolted or otherwise attached to the side of the base storage cabinet to expand the storage capacity of the base tool cabinet. Subject tool chests and cabinets also may be packaged with a tool set included. Packaging a subject tool chest and cabinet with a tool set does not remove an otherwise covered subject tool chest and cabinet from the scope. When this occurs, the tools are not part of the subject merchandise. All tool chests and cabinets that meet the above definition are included in the scope unless otherwise specifically excluded. Excluded from the scope of these Orders are tool boxes, chests, and cabinets with bodies made of plastic, carbon fiber, wood, or other non-metallic substances. Also excluded from the scope of these Orders are industrial grade steel tool chests and cabinets. The excluded industrial grade steel tool chests and cabinets are those: (1) Having a body that is over 60 inches in width; or (2) having each of the following physical characteristics: (a) a body made of steel that is 0.047 inches or more in thickness; (b) a body depth (front to back) exceeding 21 inches; and (c) a unit weight that exceeds the maximum unit weight shown below for each width range: Inches Maximum pounds Weight to Width Ratio Tool Chests 21> <25 ................................ 90 25> ≤28 ................................ 115 28> ≤30 ................................ 120 30> ≤32 ................................ 130 32> ≤34 ................................ 140 34> ≤36 ................................ 150 36> ≤38 ................................ 160 38> ≤40 ................................ 170 40> ≤42 ................................ 180 42> ≤44 ................................ 190 44> ≤46 ................................ 200 46> ≤48 ................................ 210 48> ≤50 ................................ 220 50> ≤52 ................................ 230 52> ≤54 ................................ 240 VerDate Sep<11>2014 17:29 Jul 11, 2023 Jkt 259001 PO 00000 Frm 00026 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1 lotter on DSK11XQN23PROD with NOTICES1 44276 Federal Register / Vol. 88, No. 132 / Wednesday, July 12, 2023 / Notices Inches Maximum pounds 54> ≤56 ................................ 250 56> ≤58 ................................ 260 58> ≤60 ................................ 270 Weight to Width Ratio Tool Cabinets 21> ≤25 ................................ 155 25> ≤28 ................................ 170 28> ≤30 ................................ 185 30> ≤32 ................................ 200 32> ≤34 ................................ 215 34> ≤36 ................................ 230 36> ≤38 ................................ 245 38> ≤40 ................................ 260 40> ≤42 ................................ 280 42> ≤44 ................................ 290 44> ≤46 ................................ 300 46> ≤48 ................................ 310 48> ≤50 ................................ 320 50> ≤52 ................................ 330 52> ≤54 ................................ 340 54> ≤56 ................................ 350 56> ≤58 ................................ 360 58> ≤60 ................................ 370 Also excluded from the scope of these Orders are service carts. The excluded service carts have all of the following characteristics: (1) Casters, wheels, or other similar devices which allow the service cart to be rolled from place to place; (2) an open top for storage, a flat top, or a flat lid on top of the unit that opens; (3) a space or gap between the casters, wheels, or other similar devices, and the bottom of the enclosed storage space (e.g., drawers) of at least 10 inches; and (4) a total unit height, including casters, of less than 48 inches. Also excluded from the scope of these Orders are non-mobile work benches. The excluded non-mobile work benches have all of the following characteristics: (1) A solid top working surface; (2) no drawers, one drawer, or two drawers in a side-by-side configuration; and (3) the unit is supported by legs and has no solid front, side, or back panels enclosing the body of the unit. Also excluded from the scope of these Orders are metal filing cabinets that are configured to hold hanging file folders and are classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 9403.10.0020. Merchandise subject to these Orders is classified under HTSUS categories 9403.20.0021, 9403.20.0026, 9403.20.0030, 9403.20.0080, 9403.20.0090, and 7326.90.8688, but may also be classified under HTSUS category 7326.90.3500. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of these Orders is dispositive. Appendix II Scope of the CVD Order The scope of the Order covers certain metal tool chests and tool cabinets, with drawers from China. The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics: (1) a body made of carbon, alloy, or stainless steel and/or other metals; (2) two or more drawers for storage in each individual unit; (3) a width (side to side) exceeding 15 inches for side cabinets and exceeding 21 inches for all other individual units but not exceeding 60 inches; (4) a body depth (front to back) exceeding 10 inches but not exceeding 24 inches; and (5) prepackaged for retail sale. For purposes of this scope, the width parameter applies to each individual unit, i.e., each individual top chest, intermediate top chest, tool cabinet, side cabinet, storage unit, mobile work bench, and work station. Prepackaged for retail sale means the units may, for example, be packaged in a cardboard box, other type of container or packaging, and may bear a Universal Product Code, along with photographs, pictures, images, features, artwork, and/or product specifications. Subject tool chests and cabinets are covered whether imported in assembled or unassembled form. Subject merchandise includes tool chests and cabinets produced in China but assembled, prepackaged for retail sale, or subject to other minor processing in a third country prior to importation into the United States. Similarly, it would include tool chests and cabinets produced in China that are assembled, prepackaged for retail sale, or subject to other minor processing after importation into the United States. Subject tool chests and cabinets may also have doors and shelves in addition to drawers, may have handles (typically mounted on the sides), and may have a work surface on the top. Subject tool chests and cabinets may be uncoated (e.g., stainless steel), painted, powder coated, galvanized, or otherwise coated for corrosion protection or aesthetic appearance. Subject tool chests and cabinets may be packaged as individual units or in sets. When packaged in sets, they typically include a cabinet with one or more chests that stack on top of the cabinet. Tool cabinets act as a base tool storage unit and typically have rollers, casters, or wheels to permit them to be moved more easily when loaded with tools. Work stations and mobile work benches are tool cabinets with a work surface on the top that may be made of rubber, plastic, metal, wood, or other materials. Top chests are designed to be used with a tool cabinet to form a tool storage unit. The top chests may be mounted on top of the base tool cabinet or onto an intermediate chest. They are often packaged as a set with tool cabinets or intermediate chests, but may also be packaged separately. They may be packaged with mounting hardware (e.g., bolts) and instructions for assembling them onto the base tool cabinet or onto an intermediate tool chest which rests on the base tool cabinet. Smaller top chests typically have handles on the sides, while the larger top chests typically lack handles. Intermediate tool chests are designed to fit on top of the floor standing tool cabinet and to be used underneath the top tool chest. Although they may be packaged or used separately from the tool cabinet, intermediate chests are designed to be used in conjunction with tool cabinets. The intermediate chests typically do not have handles. The intermediate and top chests may have the capability of being bolted together. Side cabinets are designed to be bolted or otherwise attached to the side of the base storage cabinet to expand the storage capacity of the base tool cabinet. Subject tool chests and cabinets also may be packaged with a tool set included. Packaging a subject tool chest and cabinet with a tool set does not remove an otherwise covered subject tool chest and cabinet from the scope. When this occurs, the tools are not part of the subject merchandise. All tool chests and cabinets that meet the above definition are included in the scope unless otherwise specifically excluded. Excluded from the scope of the Order are tool boxes, chests, and cabinets with bodies made of plastic, carbon fiber, wood, or other non-metallic substances. Also excluded from the scope of the Order are industrial grade steel tool chests and cabinets. The excluded industrial grade steel tool chests and cabinets are those: (1) having a body that is over 60 inches in width; or (2) having each of the following physical characteristics: (a) a body made of steel that is 0.047 inches or more in thickness; (b) a body depth (front to back) exceeding 21 inches; and (c) a unit weight that exceeds the maximum unit weight shown below for each width range: Inches Maximum pounds Weight to Width Ratio Tool Chests Greater than 21 and less than or equal to 25 ..................................................................................................................................... 90 Greater than 25 and less than or equal to 28 ..................................................................................................................................... 115 Greater than 28 and less than or equal to 30 ..................................................................................................................................... 120 Greater than 30 and less than or equal to 32 ..................................................................................................................................... 130 Greater than 32 and less than or equal to 34 ..................................................................................................................................... 140 VerDate Sep<11>2014 17:29 Jul 11, 2023 Jkt 259001 PO 00000 Frm 00027 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1 lotter on DSK11XQN23PROD with NOTICES1 44277Federal Register / Vol. 88, No. 132 / Wednesday, July 12, 2023 / Notices 1 See Vulcan’s Letter, ‘‘Request for Circumvention Inquiry,’’ dated May 22, 2023 (Circumvention Request). Inches Maximum pounds Greater than 34 and less than or equal to 36 ..................................................................................................................................... 150 Greater than 36 and less than or equal to 38 ..................................................................................................................................... 160 Greater than 38 and less than or equal to 40 ..................................................................................................................................... 170 Greater than 40 and less than or equal to 42 ..................................................................................................................................... 180 Greater than 42 and less than or equal to 44 ..................................................................................................................................... 190 Greater than 44 and less than or equal to 46 ..................................................................................................................................... 200 Greater than 46 and less than or equal to 48 ..................................................................................................................................... 210 Greater than 48 and less than or equal to 50 ..................................................................................................................................... 220 Greater than 50 and less than or equal to 52 ..................................................................................................................................... 230 Greater than 52 and less than or equal to 54 ..................................................................................................................................... 240 Greater than 54 and less than or equal to 56 ..................................................................................................................................... 250 Greater than 56 and less than or equal to 58 ..................................................................................................................................... 260 Greater than 58 and less than or equal to 60 ..................................................................................................................................... 270 Weight to Width Ratio Tool Cabinets Greater than 21 and less than or equal to 25 ..................................................................................................................................... 155 Greater than 25 and less than or equal to 28 ..................................................................................................................................... 170 Greater than 28 and less than or equal to 30 ..................................................................................................................................... 185 Greater than 30 and less than or equal to 32 ..................................................................................................................................... 200 Greater than 32 and less than or equal to 34 ..................................................................................................................................... 215 Greater than 34 and less than or equal to 36 ..................................................................................................................................... 230 Greater than 36 and less than or equal to 38 ..................................................................................................................................... 245 Greater than 38 and less than or equal to 40 ..................................................................................................................................... 260 Greater than 40 and less than or equal to 42 ..................................................................................................................................... 280 Greater than 42 and less than or equal to 44 ..................................................................................................................................... 290 Greater than 44 and less than or equal to 46 ..................................................................................................................................... 300 Greater than 46 and less than or equal to 48 ..................................................................................................................................... 310 Greater than 48 and less than or equal to 50 ..................................................................................................................................... 320 Greater than 50 and less than or equal to 52 ..................................................................................................................................... 330 Greater than 52 and less than or equal to 54 ..................................................................................................................................... 340 Greater than 54 and less than or equal to 56 ..................................................................................................................................... 350 Greater than 56 and less than or equal to 58 ..................................................................................................................................... 360 Greater than 58 and less than or equal to 60 ..................................................................................................................................... 370 Also excluded from the scope of the Order are service carts. The excluded service carts have all of the following characteristics: (1) casters, wheels, or other similar devices which allow the service cart to be rolled from place to place; (2) an open top for storage, a flat top, or a flat lid on top of the unit that opens; (3) a space or gap between the casters, wheels, or other similar devices, and the bottom of the enclosed storage space (e.g., drawers) of at least 10 inches; and (4) a total unit height, including casters, of less than 48 inches. Also excluded from the scope of the Order are non-mobile work benches. The excluded non-mobile work benches have all of the following characteristics: (1) a solid top working surface; (2) no drawers, one drawer, or two drawers in a side-by-side configuration; and (3) the unit is supported by legs and has no solid front, side, or back panels enclosing the body of the unit. Also excluded from the scope of the Order are metal filing cabinets that are configured to hold hanging file folders and are classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 9403.10.0020. Merchandise subject to the Order is classified under HTSUS categories 9403.20.0021, 9403.20.0026, 9403.20.0030 and 7326.90.8688, but may also be classified under HTSUS category 7326.90.3500. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of the Order is dispositive. [FR Doc. 2023–14756 Filed 7–11–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–104, C–570–105] Alloy and Certain Carbon Steel Threaded Rod From the People’s Republic of China; Carbon and Alloy Steel Threaded Rod From the People’s Republic of China: Initiation of Circumvention Inquiries on the Antidumping Duty Order and Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In response to a request from Vulcan Threaded Products Inc. (Vulcan), the U.S. Department of Commerce (Commerce) is initiating country-wide circumvention inquiries to determine whether steel threaded rod, made from alloy steel, that is produced in the United States from unthreaded pins imported from the People’s Republic of China (China) is circumventing the antidumping duty (AD) order on alloy and certain carbon steel threaded rod from China and the countervailing duty (CVD) order on carbon and alloy steel threaded rod from China. DATES : Applicable July 12, 2023. FOR FURTHER INFORMATION CONTACT : Robert Galantucci; AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–2923. SUPPLEMENTARY INFORMATION : Background On May 22, 2023, pursuant to section 781(a) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.226(c), Vulcan filed a request for circumvention inquiries 1 alleging that steel threaded rod completed in the United States using unthreaded pins imported from China was circumventing the AD and CVD orders on steel VerDate Sep<11>2014 17:29 Jul 11, 2023 Jkt 259001 PO 00000 Frm 00028 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Initiation === 73757Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices 2 See 1-Hydroxyethylidene-1,1-Diphosphonic Acid (HEDP) from China; Institution of Five-Year Reviews, 87 FR 19125 (April 1, 2022); and Initiation of Five-Year (Sunset) Reviews, 87 FR 19069 (April 1, 2022). 3 See 1-Hydroxyethylidene-1,1-Diphosphonic Acid from the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Antidumping Duty Order, 87 FR 42705 (July 18, 2022) (AD Sunset Final); and 1-Hydroxyethylidene- 1,1-Diphosphonic Acid from the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 87 FR 42707 (July 18, 2022) (CVD Sunset Final). 4 See 1-Hydroxyethylidene-1,1-Diphosphonic Acid (HEDP) from China, 87 FR 72510 (November 25, 2022); see also 1-Hydroxyethylidene-1,1- Diphosphonic Acid (HEDP) from China, Inv. Nos. 701–TA–558 and 731–TA–1316 (Review), USITC Pub. 5386 (November 2022). 5 On September 24, 2020, U.S. Customs and Border Protection (CBP) notified Commerce of additional HTSUS subheadings under which subject merchandise can be entered. Accordingly, the scope of the Orders now reflects those additional HTSUS subheadings. See AD Sunset Final, 87 FR at 42706; and CVD Sunset Final, 87 FR at 42707. Act of 1930, as amended (the Act).2 As a result of its review, Commerce determined that revocation of the Orders would likely lead to continuation or recurrence of dumping and countervailable subsidies and, therefore, notified the ITC of the magnitude of the margins and net countervailable subsidy rates likely to prevail should the Orders be revoked.3 On November 25, 2022, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.4 Scope of the Orders The merchandise covered by the Orders includes all grades of aqueous acidic (non-neutralized) concentrations of HEDP, also referred to as hydroxyethylidenendiphosphonic acid, hydroxyethanediphosphonic acid, acetodiphosphonic acid, and etidronic acid. The Chemical Abstract Service (CAS) registry number for HEDP is 2809–21–4. The merchandise subject to the Orders is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 2931.90.9043. It may also enter under HTSUS subheadings 2811.19.6090, 2931.90.9041, 2931.90.9051, 2811.19.6190, and 2931.39.0018.5 While HTSUS subheadings and the CAS registry number are provided for convenience and customs purposes only, the written description of the scope of the Orders is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to a continuation or a recurrence of dumping and countervailable subsidies, as well as material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. CBP will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act, Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to the fifth anniversary of the effective date of continuation. Administrative Protective Order This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of the APO is a sanctionable violation. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) of the Act and published in accordance with section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: November 25, 2022. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–26160 Filed 11–30–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In accordance with the Tariff Act of 1930, as amended (the Act), the Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping and countervailing duty (AD/CVD) order(s) and suspended investigation(s) listed below. The International Trade Commission (the ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable December 1, 2022. FOR FURTHER INFORMATION CONTACT : Commerce official identified in the Initiation of Review section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Act and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following antidumping and countervailing duty order(s) and suspended investigation(s): DOC case No. ITC case No. Country Product Commerce contact A–357–820 ... 731–TA–1347 Argentina ...... Biodiesel (1st Review) .................................................. Jacky Arrowsmith (202) 482–5255. VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 73758 Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19; Extension of Effective Period, 85 FR 41363 (July 10, 2020). 2 See 19 CFR 351.218(d)(1)(iii). DOC case No. ITC case No. Country Product Commerce contact A–560–830 ... 731–TA–1348 Indonesia ..... Biodiesel (1st Review) .................................................. Jacky Arrowsmith (202) 482–5255. A–822–806 ... 731–TA–1349 Belarus ......... Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–475–836 ... 731–TA–1350 Italy .............. Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–580–891 ... 731–TA–1351 Korea ........... Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–821–824 ... 731–TA–1352 Russia .......... Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–791–823 ... 731–TA–1353 South Africa Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–469–816 ... 731–TA–1354 Spain ............ Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–489–831 ... 731–TA–1355 Turkey .......... Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–823–816 ... 731–TA–1356 Ukraine ......... Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785 A–520–808 ... 731–TA–1357 United Arab Emirates. Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–412–826 ... 731–TA–1358 United King- dom. Carbon and Certain Alloy Steel Wire Rod (1st Review) Mary Kolberg (202) 482–1785. A–122–857 ... 731–TA–1342 Canada ........ Certain Softwood Lumber (1st Review) ........................ Thomas Martin (202) 482–3936. A–570–051 ... 731–TA–1341 China ............ Hardwood Plywood (1st Review) .................................. Thomas Martin (202) 482–3936. A–570–970 ... 731–TA–1179 China ............ Multilayered Wood Flooring (2nd Review) ................... Mary Kolberg (202) 482–1785. A–570–056 ... 731–TA–1360 China ............ Tool Chest and Cabinets (1st Review) ......................... Mary Kolberg (202) 482–1785. A–552–821 ... 731–TA–1361 Vietnam ........ Tool Chest and Cabinets (1st Review) ......................... Mary Kolberg (202) 482–1785. C–357–821 ... 701–TA–571 Argentina ...... Biodiesel (1st Review) .................................................. Jacky Arrowsmith (202) 482–5255. C–560–831 ... 701–TA–572 Indonesia ..... Biodiesel (1st Review) .................................................. Jacky Arrowsmith (202) 482–5255. C–475–837 ... 701–TA–573 Italy .............. Carbon and Certain Alloy Steel Wire Rod (1st Review) Jacky Arrowsmith (202) 482–5255. C–489–832 ... 701–TA–574 Turkey .......... Carbon and Certain Alloy Steel Wire Rod (1st Review) Thomas Martin (202) 482–3936. C–122–858 ... 701–TA–566 Canada ........ Certain Softwood Lumber (1st Review) ........................ Mary Kolberg (202) 482–1785. C–570–052 ... 701–TA–565 China ............ Hardwood Plywood (1st Review) .................................. Thomas Martin (202) 482–3936. C–570–971 ... 701–TA–476 China ............ Multilayered Wood Flooring (2nd Review) ................... Mary Kolberg (202) 482–1785. C–570–057 ... 701–TA–575 China ............ Tool Chest and Cabinets (1st Review) ......................... Mary Kolberg (202) 482–1785. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https:// enforcement.trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in section 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct from the ITC ’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR part 351 for definitions of terms and for other general information concerning antidumping and VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 73759Federal Register / Vol. 87, No. 230 / Thursday, December 1, 2022 / Notices countervailing duty proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: November 25, 2022. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2022–26154 Filed 11–30–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Institute of Standards and Technology [Docket Number: 221004–0210] Manufacturing USA Semiconductor Institutes; Extension of Comment Period AGENCY : National Institute of Standards and Technology (NIST), Commerce. ACTION : Notice; extension of comment period. SUMMARY : The National Institute of Standards and Technology (NIST) is extending the period for submitting comments relating to potential Manufacturing USA semiconductor institutes until December 12, 2022. In a Request for Information (RFI) that published in the Federal Register on October 13, 2022, NIST requested information to inform the design of, and requirements for, potential Manufacturing USA institutes to strengthen the semiconductor and microelectronics innovation ecosystem, which could include design, fabrication, advanced test, assembly, and packaging capability. Responses to the RFI will inform NIST’s development of funding opportunities for federal assistance to establish Manufacturing USA semiconductor institutes. DATES : Comments must be received by 11:59 p.m. Eastern time on December 12, 2022. Comments received after November 28, 2022 and before publication of this notice are deemed to be timely. Submissions received after December 12, 2022 may not be considered. Those who have already submitted comments need not resubmit. ADDRESSES : Comments may be submitted by either of the following methods: • Electronic submission: Submit electronic public comments via the Federal eRulemaking Portal. 1. Go to www.regulations.gov and enter NIST–2022–0002 in the search field, 2. Click the ‘‘Comment Now!’’ icon, complete the required fields, and 3. Enter or attach your comments. • Email: Comments in electronic form may also be sent to MfgRFI@nist.gov in any of the following formats: HTML; ASCII; Word; RTF; or PDF. Please submit comments only and include your name, organization’s name (if any), and cite ‘‘Manufacturing USA semiconductor institutes’’ in all correspondence. Comments containing references, studies, research, and other empirical data that are not widely published should include copies of the referenced materials. All comments responding to this document will be a matter of public record. Relevant comments will generally be available on the Federal eRulemaking Portal at http:// www.Regulations.gov and on NIST’s website at https://www.nist.gov/oam/ manufacturing-usa-semiconductor- institute-request-information-rfi. NIST will not accept comments accompanied by a request that part or all of the material be treated confidentially because of its business proprietary nature or for any other reason. Therefore, do not submit confidential business information or otherwise sensitive, protected, or personal information, such as account numbers, Social Security numbers, or names of other individuals. FOR FURTHER INFORMATION CONTACT : For questions about this RFI contact: Kelley Rogers in the Office of Advanced Manufacturing, National Institute of Standards and Technology, telephone number 301–219–8543 or email manufacturingusa@nist.gov. Please direct media inquiries to NIST’s Office of Public Affairs at (301) 975–2762. SUPPLEMENTARY INFORMATION : In an RFI that published in the Federal Register on October 13, 2022 (87 FR 62080), NIST requested information to inform the design of, and requirements for, potential Manufacturing USA institutes to strengthen the semiconductor and microelectronics innovation ecosystem, which could include design, fabrication, advanced test, assembly, and packaging capability. These Manufacturing USA institutes are envisioned in Title XCIX of the William M. (Mac) Thornberry National Defense Authorization Act for Fiscal Year 2021 (Creating Helpful Incentives to Produce Semiconductors (CHIPS) for America) to support efforts in research and development as well as education and workforce development, and that Act also provides for complementary initiatives including the National Semiconductor Technology Center, the National Advanced Packaging Manufacturing Program, and the NIST laboratories program supporting measurement science and standards. Responses to the RFI will inform NIST’s development of funding opportunities for federal assistance to establish Manufacturing USA semiconductor institutes. NIST is extending the comment period announced in the October 13, 2022 RFI from November 28, 2022 to December 12, 2022 in response to stakeholder requests for more time to respond to this important issue. NIST held three informational webinars explaining how the public could submit comments to the RFI, on October 20, November 2 and November 16, 2022. A link to a recording of the October 20, 2022 webinar as well as answers to Frequently Asked Questions can be found at https://www.nist.gov/oam/ manufacturing-usa-semiconductor- institute-request-information-rfi. Alicia Chambers, NIST Executive Secretariat. [FR Doc. 2022–26147 Filed 11–30–22; 8:45 am] BILLING CODE 3510–13–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648–XC584] Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification Workshops AGENCY : National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION : Notice of public workshops. SUMMARY : Free Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops will be held in January, February, and March of 2023. Certain fishermen and shark dealers are required to attend a workshop to meet regulatory requirements and to maintain valid permits. Specifically, the Atlantic Shark Identification Workshop is mandatory for all Federally permitted Atlantic shark dealers. The Safe Handling, Release, and Identification Workshop is mandatory for vessel owners and operators who use bottom longline, pelagic longline, or gillnet gear, and who have also been issued shark or swordfish limited access permits. Additional free workshops will be conducted in 2023 and will be announced in a future notice. In addition, NMFS has implemented online recertification workshops for VerDate Sep<11>2014 16:31 Nov 30, 2022 Jkt 259001 PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 E:\FR\FM\01DEN1.SGM 01DEN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Final Results - AD - China - Vietnam === 15667Federal Register / Vol. 88, No. 49 / Tuesday, March 14, 2023 / Notices 8 See section 751(a)(2)(C) of the Act. 9 See Order, 73 FR at 45405. 1 See Certain Tool Chests and Cabinets from the People’s Republic of China and the Socialist Republic of Vietnam: Antidumping Duty Orders, 83 FR 25645 (June 4, 2018) (collectively, Orders). 2 See Initiation of Five-Year (Sunset) Reviews, 87 FR 73757 (December 1, 2022) (Initiation Notice). of this review and for future deposits of estimated duties, where applicable. 8 Commerce intends to issue assessment instructions to CBP no earlier than 41 days after the date of publication of the final results of this review in the Federal Register in accordance with 19 CFR 356.8(a). Cash Deposit Requirements The following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) the cash deposit rates for the companies identified above in the ‘‘Final Results of Review’’ will be equal to the company- specific weighted-average dumping margin established in the final results of this administrative review; (2) for merchandise exported by a company not covered in this administrative review but covered in a completed prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review or completed prior segment of this proceeding but the producer is, the cash deposit rate will be the company- specific rate established for the most recently-completed segment of this proceeding for the producer of the subject merchandise; and (4) the cash deposit rate for all other producers or exporters will continue to be 3.76 percent, the rate established in the investigation of this proceeding.9 These cash deposit requirements, when imposed, shall remain in effect until further notice. Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in Commerce’s presumption that reimbursement of antidumping duties has occurred and the subsequent assessment of double antidumping duties. Administrative Protective Order This notice also serves as a final reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the term of an APO is a sanctionable violation. Notification to Interested Parties We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(5) and 19 CFR 351.213(h)(1). Dated: March 7, 2023. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix—List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. Changes Since the Preliminary Results V. Discussion of Issues Comment 1: Whether Maquilacero and TEFLU Should Continue to be Collapsed Comment 2: Whether Products Sold by TEFLU are In-Scope Merchandise Comment 3: Whether Commerce Should Use Unverified Maquilacero/TEFLU Information Comment 4: Whether Commerce Should Modify its Treatment of Certain TEFLU IMMEX Sales Comment 5: Whether Commerce Should Modify the Product Comparison Methodology SAS Programming Comment 6: Whether Commerce Must Adjust its Differential Pricing Analysis for Maquilacero/TEFLU Comment 7: Whether to Reallocate Costs for Prime and Non-Prime Products Comment 8: Whether Commerce Should Combine Maquilacero and TEFLU’s Home Market Sales Comment 9: Whether to Implement Certain Corrections to TEFLU’s IMMEX Sales Comment 10: Whether to Correct the Application of Maquilacero/TEFLU’s Transactions Disregarded Adjustment Comment 11: Whether to Assign a Value for U.S. Sales Where No Importer is Reported Comment 12: Whether to Include Abinsa’s Late Payment Charges Revenue Comment 13: Whether to Modify the Treatment of Certain Agent-Related Expenses Comment 14: Whether to Allow Maquilacero’s Packing Adjustment Comment 15: Whether Commerce Should Use Regiopytsa’s Quarterly Cost Periods Comment 16: Whether Commerce Should Use a Different General and Administrative Expense Ratio for Regiopytsa Comment 17: Whether Commerce Should Modify Regiopytsa’s Net Financial Expense Ratio Comment 18: Whether Commerce Should Rely on a Different Methodology for Assigning a Weighted-Average Dumping Margin to Perfiles VI. Recommendation [FR Doc. 2023–05209 Filed 3–13–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–056, A–552–821] Certain Tool Chests and Cabinets From the People’s Republic of China and the Socialist Republic of Vietnam: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of these expedited sunset reviews, the U.S. Department of Commerce (Commerce) finds that revocation of the antidumping duty (AD) orders on certain tool chests and cabinets (tool chests and cabinets) from the People’s Republic of China (China) and the Socialist Republic of Vietnam (Vietnam) would be likely to lead to continuation or recurrence of dumping at the level indicated in the ‘‘Final Results of Sunset Reviews’’ section of this notice. DATES : Applicable March 14, 2023. FOR FURTHER INFORMATION CONTACT : Claudia Cott, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4270. SUPPLEMENTARY INFORMATION : Background On June 4, 2018, Commerce published in the Federal Register the AD orders on tool chests from China and Vietnam. 1 On December 1, 2022, Commerce published the Initiation Notice of the five-year sunset reviews of the Orders pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).2 In accordance with 19 CFR 351.218(d)(1)(i) and (ii), Commerce received notices of VerDate Sep<11>2014 21:09 Mar 13, 2023 Jkt 259001 PO 00000 Frm 00029 Fmt 4703 Sfmt 4703 E:\FR\FM\14MRN1.SGM 14MRN1 ddrumheller on DSK120RN23PROD with NOTICES1 15668 Federal Register / Vol. 88, No. 49 / Tuesday, March 14, 2023 / Notices 3 See Domestic Interested Party’s Letters, ‘‘Five Year (‘‘Sunset’’) Review of the Antidumping Duty Order on Tool Chests and Cabinets from China— Domestic Interested Party’s Notice of Intent to Participate,’’ dated December 15, 2022; see also ‘‘Five Year (‘‘Sunset’’) Review of the Antidumping Duty Order on Tool Chests and Cabinets from Vietnam—Domestic Interested Party’s Notice of Intent to Participate,’’ dated December 15, 2022 (Notices of Intent to Participate). The petitioner in the underlying investigation, Waterloo Industries Inc. (Waterloo), was acquired by Stanley Black & Decker Corporation on July 28, 2017, and now operates under the Stanley Black & Decker name. 4 Id. 5 See Domestic Interested Party’s Letters, ‘‘Five Year (‘‘Sunset’’) Review of the Antidumping Duty Order on Tool Chests and Cabinets from China— Domestic Interested Party’s Substantive Response,’’ dated January 3, 2023 (China Substantive Response); see also ‘‘Five Year (‘‘Sunset’’) Review of the Antidumping Duty Order on Tool Chests and Cabinets from Vietnam—Domestic Interested Party’s Substantive Response,’’ dated January 3, 2023 (Vietnam Substantive Response). 6 See Commerce’s Letter, ‘‘Sunset Reviews Initiated December 1, 2022,’’ dated January 25, 2023. 7 See Memorandum, ‘‘Issues and Decision Memorandum for the Expedited Sunset Reviews of the Antidumping Duty Orders on Certain Tool Chests and Cabinets from the People’s Republic of China, and the Socialist Republic of Vietnam,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 8 Id. intent to participate in these sunset reviews from Stanley Black & Decker (the domestic interested party) within 15 days after the date of publication of the Initiation Notice.3 The domestic interested party claimed interested party status under section 771(9)(C) of the Act as a producer of a domestic like product in the United States.4 Commerce received timely, adequate substantive responses to the Initiation Notice from the domestic interested party within the 30-day period specified in 19 CFR 351.218(d)(3)(i).5 We did not receive substantive responses from any other interested parties. On January 25, 2023, Commerce notified the U.S. International Trade Commission (ITC) that it did not receive an adequate substantive response from other interested parties. 6 As a result, in accordance with section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted expedited, i.e., 120-day sunset reviews of the Orders. Scope of the Orders The products covered by these Orders are certain metal tool chests and tool cabinets, with drawers, from China and Vietnam. The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics: (1) A body made of carbon, alloy, or stainless steel and/or other metals; (2) two or more drawers for storage in each individual unit; (3) a width (side to side) exceeding 15 inches for side cabinets and exceeding 21 inches for all other individual units but not exceeding 60 inches; (4) a body depth (front to back) exceeding 10 inches but not exceeding 24 inches; and (5) prepackaged for retail sale. For purposes of this scope, the width parameter applies to each individual unit, i.e., each individual top chest, intermediate top chest, tool cabinet, side cabinet, storage unit, mobile work bench, and work station. Merchandise subject to these Orders is classified under HTSUS categories 9403.20.0021, 9403.20.0026, 9403.20.0030, 9403.20.0080, 9403.20.0090, and 7326.90.8688, but may also be classified under HTSUS category 7326.90.3500. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of these Orders is dispositive. A full description of the scope of the Orders is contained in the Issues and Decision Memorandum.7 Analysis of Comments Received All issues raised in these sunset reviews are addressed in the Issues and Decision Memorandum, including the likelihood of continuation or recurrence of dumping and the magnitude of the margins of dumping likely to prevail if the Orders were revoked.8 A list of topics discussed in the Issues and Decision Memorandum is included as the appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Reviews Pursuant to sections 751(c)(1) and 752(c)(1) and (3) of the Act, Commerce determines that revocation of the Orders would be likely to lead to continuation or recurrence of dumping and that the magnitude of the margins of dumping likely to prevail would be at a rate up to 244.29 percent for China, and up to 327.17 percent for Vietnam. Administrative Protective Order This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties Commerce is issuing and publishing these final results and notice in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act, and 19 CFR 351.221(c)(5)(ii). Dated: March 8, 2023. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix—List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Orders IV. History of the Orders V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of Dumping 2. Magnitude of Margin of Dumping Likely to Prevail VII. Final Results of Expedited Sunset Reviews VIII. Recommendation [FR Doc. 2023–05170 Filed 3–13–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–533–871] Finished Carbon Steel Flanges From India: Final Results of Antidumping Duty Administrative Review; 2020– 2021 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) determines that producers and/or exporters subject to this administrative review made sales of subject merchandise at less than normal value (NV) during the period of review (POR) August 1, 2020, through July 31, 2021. DATES : Applicable March 14, 2023. FOR FURTHER INFORMATION CONTACT : Fred Baker or Preston Cox, AD/CVD VerDate Sep<11>2014 21:09 Mar 13, 2023 Jkt 259001 PO 00000 Frm 00030 Fmt 4703 Sfmt 4703 E:\FR\FM\14MRN1.SGM 14MRN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - CVD - China === 19065Federal Register / Vol. 88, No. 61 / Thursday, March 30, 2023 / Notices 1 See Certain Tool Chests and Cabinets from the People’s Republic of China: Countervailing Duty Order, 83 FR 3299 (January 24, 2018) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 87 FR 73757 (December 1, 2022) (Initiation Notice). 3 See Domestic Interested Party’s Letter, ‘‘Five Year (‘‘Sunset’’) Review of the Countervailing Duty Order on Tool Chests and Cabinets from China— Domestic Interested Party’s Notice of Intent to Participate,’’ dated December 15, 2022. The petitioner in the underlying investigation, Waterloo Industries Inc. (Waterloo), was acquired by Stanley Black & Decker Corporation on July 28, 2017, and now operates under the Stanley Black & Decker name. 4 Id. 5 See Domestic Interested Party’s Letter, ‘‘Five Year (‘‘Sunset’’) Review of the Countervailing Duty Order on Tool Chests and Cabinets from China— Domestic Interested Party’s Substantive Response,’’ dated January 3, 2023 (Substantive Response). 6 See Commerce’s Letter, ‘‘Sunset Reviews Initiated December 1, 2022,’’ dated January 25, 2023. to enjoy the benefits of participating in the EU-U.S. DPF and/or the Swiss-U.S. DPF (as applicable) must comply with the amended Principles once those amendments have entered into effect. More information on the binding arbitration option under the Data Privacy Framework program will be made available on the DOC’s Data Privacy Framework program website (https://www.dataprivacyframework. gov/) once that is launched; however, such information will also be made available, as appropriate, on the DOC’s Privacy Shield program website (https:// www.privacyshield.gov/welcome). III. Data OMB Control Number: New collection. Not yet assigned. Form Number(s): None. Type of Review: Regular submission, new information collection. Affected Public: Private individuals. Estimated Number of Respondents: 36. Estimated Time per Response: 240 minutes. Estimated Total Annual Burden Hours: 144. Estimated Total Annual Cost to Public: $0. Respondent’s Obligation: Required to obtain or retain benefits. Legal Authority: The DOC’s statutory authority to foster, promote, and develop the foreign and domestic commerce of the United States (15 U.S.C. 1512). IV. Request for Comments We are soliciting public comments to permit the Department/Bureau to: (a) Evaluate whether the proposed information collection is necessary for the proper functions of the Department, including whether the information will have practical utility; (b) Evaluate the accuracy of our estimate of the time and cost burden for this proposed collection, including the validity of the methodology and assumptions used; (c) Evaluate ways to enhance the quality, utility, and clarity of the information to be collected; and (d) Minimize the reporting burden on those who are to respond, including the use of automated collection techniques or other forms of information technology. Comments that you submit in response to this notice are a matter of public record. We will include or summarize each comment in our request to OMB to approve this information collection request (ICR). Before including your address, phone number, email address, or other personal identifying information in your comment, you should be aware that your entire comment—including your personal identifying information—may be made publicly available at any time. While you may ask us in your comment to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Sheleen Dumas, Department PRA Clearance Officer, Office of the Under Secretary for Economic Affairs, Commerce Department. [FR Doc. 2023–06647 Filed 3–29–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–057] Certain Tool Chests and Cabinets From the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of this expedited sunset review, the U.S. Department of Commerce (Commerce) finds that revocation of the countervailing duty (CVD) order on certain tool chests and cabinets (tool chests and cabinets) from the People’s Republic of China (China) would be likely to lead to continuation or recurrence of countervailable subsidies at the levels indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable March 30, 2023. FOR FURTHER INFORMATION CONTACT : Claudia Cott, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4270. SUPPLEMENTARY INFORMATION : Background On January 24, 2018, Commerce published in the Federal Register the CVD order on tool chests from China. 1 On December 1, 2022, Commerce published in the Federal Register the Initiation Notice of the first five-year sunset review of the Order pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).2 In accordance with 19 CFR 351.218(d)(1)(i) and (ii), Commerce received a timely notice of intent to participate in this sunset review from Stanley Black & Decker (the domestic interested party) within 15 days after the date of publication of the Initiation Notice.3 The domestic interested party claimed interested party status under section 771(9)(C) of the Act as a producer of a domestic like product in the United States. 4 Commerce received a timely and adequate substantive response to the Initiation Notice from the domestic interested party within the 30-day period specified in 19 CFR 351.218(d)(3)(i).5 Commerce received no substantive responses from any other interested parties, including the Government of China, nor was a hearing requested. On January 25, 2023, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from other interested parties. 6 As a result, in accordance with section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited, i.e., 120-day, sunset review of the Order. Scope of the Order The scope of the Order covers certain metal tool chests and tool cabinets, with drawers, from China. The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics: (1) a body made of carbon, alloy, or stainless steel and/or other metals; (2) two or more drawers for storage in each individual unit; (3) a width (side to side) exceeding 15 inches for side cabinets and exceeding 21 inches for all other individual units but not exceeding 60 inches; (4) a body depth (front to back) exceeding 10 inches but not exceeding 24 inches; and (5) prepackaged for retail sale. VerDate Sep<11>2014 17:22 Mar 29, 2023 Jkt 259001 PO 00000 Frm 00015 Fmt 4703 Sfmt 4703 E:\FR\FM\30MRN1.SGM 30MRN1 lotter on DSK11XQN23PROD with NOTICES1 19066 Federal Register / Vol. 88, No. 61 / Thursday, March 30, 2023 / Notices 7 See Memorandum, ‘‘Issues and Decision Memorandum for the Final Results of the Expedited First Sunset Review of the Countervailing Duty Order on Certain Tool Chests and Cabinets from the People’s Republic of China,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 8 Jiangsu Tongrun Equipment Technology Co., Ltd.’s cross-owned affiliates include the following entities: Changshu Jack Factory; Changshu Tongrun Taron Import and Export Co., Ltd. (also known as Changshu Tongrun Equipment Co., Ltd.); Changshu Tongrun Mechanical & Electrical Equipment Manufacture Co., Ltd.; Changshu Taron Machinery Equipment Manufacturing Co., Ltd.; and Changshu General Electrical Factory Co., Ltd. For purposes of this scope, the width parameter applies to each individual unit, i.e., each individual top chest, intermediate top chest, tool cabinet, side cabinet, storage unit, mobile work bench, and work station. Merchandise subject to the Order is classified under HTSUS categories 9403.20.0021, 9403.20.0026, 9403.20.0030, 9403.20.0080, 9403.20.0090, and 7326.90.8688, but may also be classified under HTSUS category 7326.90.3500. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of the Order is dispositive. A full description of the scope of the Order is contained in the Issues and Decision Memorandum.7 Analysis of Comments Received All issues raised in this sunset review are addressed in the Issues and Decision Memorandum. A list of topics discussed in the Issues and Decision Memorandum is included as Appendix I to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/ public/FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Order would be likely to lead to continuation or recurrence of a countervailable subsidy at the rates listed in Appendix II to this notice. Administrative Protective Order This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties Commerce is issuing and publishing the final results and notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act, and 19 CFR 351.218. Dated: March 24, 2023. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix I List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Likely to Prevail 3. Nature of the Subsidy VII. Final Results of Sunset Review VIII. Recommendation Appendix II Exporter/producer Subsidy rate (percent ad valorem) Jiangsu Tongrun Equipment Technology Co., Ltd 8 ............................................................................................................................ 15.52 Zhongshan Geelong Manufacturing Co., Ltd ...................................................................................................................................... 14.46 Allround Hardware Co., Ltd ................................................................................................................................................................. 96.15 Beijing Kang Jie Kong International Cargo Agent Co., Ltd ................................................................................................................. 96.15 Changshu Zhongcheng Tool Box Co., Ltd .......................................................................................................................................... 14.82 Changzhou City Hongfei Metalwork Corporation ................................................................................................................................ 96.15 Changzhou Machan Steel Furniture Co., Ltd ...................................................................................................................................... 14.82 China National Electronics Import and Export Ningbo Co .................................................................................................................. 96.15 Foshan Lishida Metal Products Co., Ltd ............................................................................................................................................. 96.15 Gem-Year Industrial Co., Ltd ............................................................................................................................................................... 96.15 Guangdong Hisense Home Appliances Co., Ltd ................................................................................................................................ 14.82 Guerjie Enterprise Co., Ltd .................................................................................................................................................................. 96.15 Haiyan Dingfeng Fasteners Ltd ........................................................................................................................................................... 96.15 Hangzhou Xiaoshan Import and Export Trading Co., Ltd ................................................................................................................... 96.15 Hyxion Metal Industry .......................................................................................................................................................................... 14.82 Jiaxing Pinyou Import & Export Co., Ltd ............................................................................................................................................. 96.15 Jin Rong Hua Le Metal Manufactures Co., Ltd ................................................................................................................................... 14.82 Jinhua JG Tools Manufacturing Co ..................................................................................................................................................... 14.82 Jinhua Yahu Tools Co., Ltd ................................................................................................................................................................. 14.82 Keesung Manufacturing Co., Ltd ......................................................................................................................................................... 14.82 Kingstar Tools Co., Ltd ........................................................................................................................................................................ 96.15 Liyang Flying Industry Co., Ltd ............................................................................................................................................................ 96.15 Meridian International Co., Ltd ............................................................................................................................................................ 14.82 Ningbo Better Design Industry Co., Ltd .............................................................................................................................................. 96.15 Ningbo Hualei Tool Co., Ltd ................................................................................................................................................................ 96.15 Ningbo Jiufeng Electronic Tools .......................................................................................................................................................... 96.15 Ningbo Safewell International Holding Corp ....................................................................................................................................... 14.82 Ningbo Xiunan International Co., Ltd .................................................................................................................................................. 96.15 Pinghu Chenda Storage Office Equipment Co., Ltd ........................................................................................................................... 14.82 Pooke Technology Co., Ltd ................................................................................................................................................................. 14.82 Shanghai All-Fast International Trade Co., Ltd ................................................................................................................................... 14.82 VerDate Sep<11>2014 17:22 Mar 29, 2023 Jkt 259001 PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 E:\FR\FM\30MRN1.SGM 30MRN1 lotter on DSK11XQN23PROD with NOTICES1 19067Federal Register / Vol. 88, No. 61 / Thursday, March 30, 2023 / Notices Exporter/producer Subsidy rate (percent ad valorem) Shanghai All-Hop Industry Co., Ltd ..................................................................................................................................................... 14.82 Shanghai Delta International Trading .................................................................................................................................................. 96.15 Shanghai Fairlong International Trading Co., Ltd ............................................................................................................................... 96.15 Shanghai ITPC Hardware Co., Ltd ...................................................................................................................................................... 14.82 Shanghai Legsteel Metal Products Co., Ltd ........................................................................................................................................ 96.15 Shanghai Tung Hsing Technology Inc ................................................................................................................................................ 96.15 Shining Golden Yida Welding & Cutting Machinery Manufacture Ltd ................................................................................................ 96.15 Suzhou Aomeijia Metallic Products Co., Ltd ....................................................................................................................................... 96.15 Suzhou Goldenline Machinery Co., Ltd ............................................................................................................................................... 96.15 Suzhou Xindadi Hardware Co., Ltd ..................................................................................................................................................... 14.82 Taixing Hutchin Mfg. Co., Ltd .............................................................................................................................................................. 14.82 Tong Ming Enterprise (Jiaxing) Co., Ltd ............................................................................................................................................. 96.15 Trantex Product (Zhong Shan) Co., Ltd .............................................................................................................................................. 14.82 Wuyi Yunlin Steel Products Co., Ltd ................................................................................................................................................... 96.15 Yangzhou Huayu Pipe Fitting Co., Ltd ................................................................................................................................................ 96.15 Yangzhou Triple Harvest Power Tools Limited ................................................................................................................................... 14.82 Zhangjiagang Houfeng Machinery Co., Ltd ......................................................................................................................................... 96.15 Zhejiang KC Mechanical & Electrical .................................................................................................................................................. 96.15 Zhejiang Zhenglian Corp ..................................................................................................................................................................... 96.15 Zhuhai Shichang Metals Ltd ................................................................................................................................................................ 96.15 All Others ............................................................................................................................................................................................. 14.82 [FR Doc. 2023–06585 Filed 3–29–23; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Agency Information Collection Activities; Submission to the Office of Management and Budget (OMB) for Review and Approval; Comment Request; Self-Certifications Under the Data Privacy Framework Program AGENCY : International Trade Administration, Department of Commerce. ACTION : Notice of information collection, request for comment. SUMMARY : The Department of Commerce, in accordance with the Paperwork Reduction Act of 1995 (PRA), invites the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. The purpose of this notice is to allow for 60 days of public comment preceding submission of the collection to OMB. DATES : To ensure consideration, comments regarding this proposed information collection must be received on or before May 30, 2023. ADDRESSES : Interested persons are invited to submit written comments to Leo Kim, ITA Paperwork Clearance Officer, International Trade Administration, Department of Commerce, Room 23016RA, 14th and Constitution Avenue NW, Washington, DC 20230 (or via the internet at PRAcomment@doc.gov). Do not submit Confidential Business Information or otherwise sensitive or protected information. FOR FURTHER INFORMATION CONTACT : Requests for additional information or specific questions related to collection activities should be directed to David Ritchie, Senior Policy Advisor, International Trade Administration, Department of Commerce via email at dpf.program@trade.gov, or by telephone at 202–482–1512. SUPPLEMENTARY INFORMATION : I. Abstract The United States, the European Union (EU), the United Kingdom (UK), and Switzerland share a commitment to enhancing privacy protection, the rule of law, and a recognition of the importance of transatlantic data flows to our respective citizens, economies, and societies, but take different approaches to doing so. Given those differences, the Department of Commerce (DOC) developed the EU-U.S. Data Privacy Framework (EU-U.S. DPF), the UK Extension to the EU-U.S. Data Privacy Framework (UK Extension to the EU- U.S. DPF), and the Swiss-U.S. Data Privacy Framework (Swiss-U.S. DPF) in consultation with the European Commission, the UK Government, the Swiss Federal Administration, industry, and other stakeholders. These arrangements were respectively developed to provide U.S. organizations reliable mechanisms for personal data transfers to the United States from the European Union, the United Kingdom, and Switzerland while ensuring data protection that is consistent with EU, UK, and Swiss law. The DOC is issuing the EU-U.S. DPF Principles and the Swiss-U.S. DPF Principles, including the respective sets of Supplemental Principles (collectively the Principles) and Annex I of the Principles, as well as the UK Extension to the EU-U.S. DPF under its statutory authority to foster, promote, and develop international commerce (15 U.S.C. 1512). The International Trade Administration (ITA) will administer and supervise the Data Privacy Framework program, including maintaining and making publicly available the Data Privacy Framework List, an authoritative list of U.S. organizations that have self-certified to the DOC and declared their commitment to adhere to the Principles pursuant to the EU-U.S. DPF and, as applicable, the UK Extension to the EU-U.S. DPF, and/ or the Swiss-U.S. DPF. On the basis of the Principles, Executive Order 14086, 28 CFR part 201, and accompanying letters and materials, including ITA’s commitments regarding the administration and supervision of the Data Privacy Framework program, it is the DOC’s expectation that the European Commission, the UK Government, and the Swiss Federal Administration will respectively recognize the adequacy of the protection provided by the EU-U.S. DPF, the UK Extension to the EU-U.S. DPF, and the Swiss-U.S. DPF thereby enabling personal data transfers from each respective jurisdiction to U.S. organizations participating in the relevant part of the Data Privacy Framework program. The EU-U.S. DPF, VerDate Sep<11>2014 17:22 Mar 29, 2023 Jkt 259001 PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 E:\FR\FM\30MRN1.SGM 30MRN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Scheduling === 23464 Federal Register / Vol. 88, No. 73 / Monday, April 17, 2023 / Notices 1 Handbook for Electronic Filing Procedures: https://www.usitc.gov/documents/handbook_on_ filing_procedures.pdf. 2 All contract personnel will sign appropriate nondisclosure agreements. 3 Electronic Document Information System (EDIS): https://edis.usitc.gov. 1 A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s website. In particular, the Commission is interested in comments that: (i) explain how the articles potentially subject to the requested remedial orders are used in the United States; (ii) identify any public health, safety, or welfare concerns in the United States relating to the requested remedial orders; (iii) identify like or directly competitive articles that complainant, its licensees, or third parties make in the United States which could replace the subject articles if they were to be excluded; (iv) indicate whether complainant, complainant’s licensees, and/or third party suppliers have the capacity to replace the volume of articles potentially subject to the requested exclusion order and/or a cease and desist order within a commercially reasonable time; and (v) explain how the requested remedial orders would impact United States consumers. Written submissions on the public interest must be filed no later than by close of business, eight calendar days after the date of publication of this notice in the Federal Register. There will be further opportunities for comment on the public interest after the issuance of any final initial determination in this investigation. Any written submissions on other issues must also be filed by no later than the close of business, eight calendar days after publication of this notice in the Federal Register. Complainant may file replies to any written submissions no later than three calendar days after the date on which any initial submissions were due, notwithstanding § 201.14(a) of the Commission’s Rules of Practice and Procedure. No other submissions will be accepted, unless requested by the Commission. Any submissions and replies filed in response to this Notice are limited to five (5) pages in length, inclusive of attachments. Persons filing written submissions must file the original document electronically on or before the deadlines stated above. Submissions should refer to the docket number (‘‘Docket No. 3675) in a prominent place on the cover page and/or the first page. (See Handbook for Electronic Filing Procedures, Electronic Filing Procedures 1). Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov.) No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Persons with questions regarding filing should contact the Secretary at EDIS3Help@usitc.gov. Any person desiring to submit a document to the Commission in confidence must request confidential treatment. All such requests should be directed to the Secretary to the Commission and must include a full statement of the reasons why the Commission should grant such treatment. See 19 CFR 201.6. Documents for which confidential treatment by the Commission is properly sought will be treated accordingly. All information, including confidential business information and documents for which confidential treatment is properly sought, submitted to the Commission for purposes of this Investigation may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel,2 solely for cybersecurity purposes. All nonconfidential written submissions will be available for public inspection at the Office of the Secretary and on EDIS. 3 This action is taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and of §§ 201.10 and 210.8(c) of the Commission’s Rules of Practice and Procedure (19 CFR 201.10, 210.8(c)). By order of the Commission. Issued: April 12, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–08080 Filed 4–14–23; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–575 and 731– TA–1360–1361 (Review)] Tool Chests and Cabinets From China and Vietnam; Scheduling of Expedited Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of expedited reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether revocation of the countervailing duty order on tool chests and cabinets from China and the antidumping duty orders on tool chests and cabinets from China and Vietnam would be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time. DATES : March 6, 2023. FOR FURTHER INFORMATION CONTACT : Alejandro Orozco (202–205–3177), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On March 6, 2023, the Commission determined that the domestic interested party group response to its notice of institution (87 FR 73786, December 1, 2022) of the subject five-year reviews was adequate and that the respondent interested party group response was inadequate. The Commission did not find any other circumstances that would warrant conducting full reviews. 1 Accordingly, the Commission determined that it would conduct expedited reviews pursuant to section 751(c)(3) of the Tariff Act of 1930 (19 U.S.C. 1675(c)(3)). VerDate Sep<11>2014 16:57 Apr 14, 2023 Jkt 259001 PO 00000 Frm 00075 Fmt 4703 Sfmt 4703 E:\FR\FM\17APN1.SGM 17APN1 lotter on DSK11XQN23PROD with NOTICES1 23465Federal Register / Vol. 88, No. 73 / Monday, April 17, 2023 / Notices 2 The Commission has found the responses submitted on behalf of Stanley Black & Decker to be individually adequate. Comments from other interested parties will not be accepted (see 19 CFR 207.62(d)(2)). For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Staff report.—A staff report containing information concerning the subject matter of the reviews has been placed in the nonpublic record, and will be made available to persons on the Administrative Protective Order service list for these reviews on May 31, 2023. A public version will be issued thereafter, pursuant to § 207.62(d)(4) of the Commission’s rules. Written submissions.—As provided in § 207.62(d) of the Commission’s rules, interested parties that are parties to the reviews and that have provided individually adequate responses to the notice of institution, 2 and any party other than an interested party to the reviews may file written comments with the Secretary on what determination the Commission should reach in the reviews. Comments are due on or before June 8, 2023 and may not contain new factual information. Any person that is neither a party to the five-year reviews nor an interested party may submit a brief written statement (which shall not contain any new factual information) pertinent to the reviews by June 8, 2023. However, should the Department of Commerce (‘‘Commerce’’) extend the time limit for its completion of the final results of its reviews, the deadline for comments (which may not contain new factual information) on Commerce’s final results is three business days after the issuance of Commerce’s results. If comments contain business proprietary information (BPI), they must conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Determination.—The Commission has determined these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: April 11, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–07952 Filed 4–14–23; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE Bureau of Alcohol, Tobacco, Firearms and Explosives [OMB 1140–0015] Agency Information Collection Activities; Proposed eCollection of eComments Requested; Application for Tax Exempt Transfer and Registration of Firearm—ATF Form 5 (5320.5) AGENCY : Bureau of Alcohol, Tobacco, Firearms and Explosives, Department of Justice. ACTION : 60-Day notice. SUMMARY : The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), Department of Justice (DOJ), will submit the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995. The information collection (IC) OMB 1140–0015 (Application for Tax Exempt Transfer and Registration of Firearm— ATF Form 5 (5320.5)) is being revised to include additional questions and grammar changes. The proposed IC is also being published to obtain comments from the public and affected agencies. DATES : Comments are encouraged and will be accepted for 60 days until June 16, 2023. FOR FURTHER INFORMATION CONTACT : If you have additional comments regarding the estimated public burden or associated response time, suggestions, or need a copy of the proposed information collection instrument with instructions, or additional information, contact: Connor Brandt, National Firearms Act Division either by mail at 244 Needy Road, Martinsburg, WV 25405, by email at nfaombcomments@atf.gov, or by telephone at 304–616–3175. SUPPLEMENTARY INFORMATION : Written comments and suggestions from the public and affected agencies concerning the proposed collection of information are encouraged. Your comments should address one or more of the following four points: —Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; —Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; —Evaluate whether and, if so, how the quality, utility, and clarity of the information to be collected can be enhanced; and —Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Overview of This Information Collection (1) Type of Information Collection (check justification or form 83): Revision of a currently approved collection. (2) The Title of the Form/Collection: Application for Tax Exempt Transfer and Registration of Firearm. (3) The agency form number, if any, and the applicable component of the Department sponsoring the collection: Form number (if applicable): ATF Form 5 (5320.5). Component: Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of Justice. (4) Affected public who will be asked or required to respond, as well as a brief abstract: Primary: Federal Government and State, local or Tribal government. Other (if applicable): Individuals or households, business or other for-profit, not-for-profit institutions, and farms. Abstract: The Application for Tax Exempt Transfer and Registration of Firearm—ATF Form 5 (5320.5) is used request permission to transfer and register a National Firearms Act (NFA) firearm, and to claim exemption from the transfer tax. (5) An estimate of the total number of respondents and the amount of time VerDate Sep<11>2014 16:57 Apr 14, 2023 Jkt 259001 PO 00000 Frm 00076 Fmt 4703 Sfmt 4703 E:\FR\FM\17APN1.SGM 17APN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Determination === 43399Federal Register / Vol. 88, No. 129 / Friday, July 7, 2023 / Notices 2 88 FR 32184 (May 19, 2023) and 88 FR 34485 (May 30, 2023). 3 Chairman David S. Johanson dissenting, and Commissioner Randolph J. Stayin not participating. 4 The Commission also finds that imports subject to Commerce’s affirmative critical circumstances determination are not likely to undermine seriously the remedial effect of the antidumping and countervailing duty orders on FRCs from China. 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that an industry in the United States is materially injured by reason of imports of certain freight rail couplers and parts thereof (‘‘FRCs’’) from China, provided for in subheadings 8607.30.10 and 7326.90.86 of the Harmonized Tariff Schedule of the United States, that have been found by the U.S. Department of Commerce (‘‘Commerce’’) to be sold in the United States at less than fair value (‘‘LTFV’’) and subsidized by the government of China.2 3 4 Background The Commission instituted these investigations effective September 28, 2022, following receipt of petitions filed with the Commission and Commerce by the Coalition of Freight Coupler Producers, consisting of McConway & Torley LLC, Pittsburgh, Pennsylvania, and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL-CIO, CLC. The final phase of the investigations was scheduled by the Commission following notification of preliminary determinations by Commerce that imports of FRCs from China were subsidized within the meaning of section 703(b) of the Act (19 U.S.C. 1671b(b)) and sold at LTFV within the meaning of 733(b) of the Act (19 U.S.C. 1673b(b)). Notice of the scheduling of the final phase of the Commission’s investigations and of a public hearing to be held in connection therewith was given by posting copies of the notice in the Office of the Secretary, U.S. International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register on March 15, 2023 (88 FR 16031). The Commission conducted its hearing on May 18, 2023. All persons who requested the opportunity were permitted to participate. The Commission made these determinations pursuant to §§ 705(b) and 735(b) of the Act (19 U.S.C. 1671d(b) and 19 U.S.C. 1673d(b)). It completed and filed its determinations in these investigations on July 3, 2023. The views of the Commission are contained in USITC Publication 5438 (July 2023), entitled Certain Freight Rail Couplers and Parts Thereof from China: Investigation Nos. 701–TA–682 and 731–TA–1592 (Final). By order of the Commission. Issued: July 3, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–14410 Filed 7–6–23; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–575 and 731– TA–1360–1361 (Review)] Tool Chests and Cabinets From China and Vietnam Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing duty order on tool chests and cabinets from China and revocation of the antidumping duty orders on tool chests and cabinets from China and Vietnam would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on December 1, 2022 (87 FR 73786) and determined on March 6, 2023 that it would conduct expedited reviews (88 FR 23464, April 17, 2023). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on June 30, 2023. The views of the Commission are contained in USITC Publication 5445 (June 2023), entitled Tool Chests and Cabinets from China and Vietnam: Investigation Nos. 701–TA–575 and 731–TA–1360–1361 (Review). By order of the Commission. Issued: June 30, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–14302 Filed 7–6–23; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE [OMB Number 1105–0108] Agency Information Collection Activities; Proposed eCollection eComments Requested; Extension of a Previously Approved Collection; Complaint Regarding United States Marshals Service (USMS) Personnel or Programs AGENCY : U.S. Marshals Service, Department of Justice. ACTION : 60-Day notice. SUMMARY : The Department of Justice (DOJ), U.S. Marshals Service (USMS), will be submitting the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995. DATES : Comments are encouraged and will be accepted for 60 days until September 5, 2023. FOR FURTHER INFORMATION CONTACT : If you have additional comments especially on the estimated public burden or associated response time, suggestions, or need a copy of the proposed information collection instrument with instructions or additional information, please contact Karl Slazer, U.S. Marshals Service Headquarters, 1215 S Clark St., Ste. 10005, Arlington, VA 22202–4387, 703– 740–2316; kslazer@usms.doj.gov. SUPPLEMENTARY INFORMATION : Written comments and suggestions from the public and affected agencies concerning the proposed collection of information are encouraged. Your comments should address one or more of the following four points: —Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the Bureau of Justice Statistics, including whether the information will have practical utility; —Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; —Evaluate whether and if so how the quality, utility, and clarity of the information to be collected can be enhanced; and —Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., VerDate Sep<11>2014 18:55 Jul 06, 2023 Jkt 259001 PO 00000 Frm 00137 Fmt 4703 Sfmt 4703 E:\FR\FM\07JYN1.SGM 07JYN1 ddrumheller on DSK120RN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Determination - Correction === 44396 Federal Register / Vol. 88, No. 132 / Wednesday, July 12, 2023 / Notices INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–575 and 731– TA–1360–1361 (Review)] Tool Chests and Cabinets From China and Vietnam; Determinations; Correction AGENCY : U.S. International Trade Commission. ACTION : Notice; correction. SUMMARY : Correction is made to the publication number. SUPPLEMENTARY INFORMATION : Correction In the Federal Register of July 7, 2023 (88 FR 43399) in FR Doc. 2023–14302, under Background, the publication number should be USITC Publication 5439 (June 2023). Issued: July 7, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–14781 Filed 7–11–23; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–1358] Certain LED Landscape Lighting Devices, Components Thereof, and Products Containing Same; Notice of a Commission Determination Not To Review an Initial Determination Granting a Joint Motion To Terminate the Investigation; Termination of Investigation AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission (‘‘Commission’’) has determined not to review an initial determination (‘‘ID’’) (Order No. 7) of the presiding chief administrative law judge (‘‘CALJ’’) granting a joint motion to terminate the investigation in its entirety based upon settlement. FOR FURTHER INFORMATION CONTACT : Edward S. Jou, Esq., Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 205–3316. Copies of non-confidential documents filed in connection with this investigation may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal, telephone (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission instituted this investigation on April 14, 2023, based upon a complaint filed on behalf of Wangs Alliance Corporation d/b/a WAC Lighting (‘‘WAC’’) of Port Washington, New York. 88 FR 23096–97 (Apr. 14, 2023). The complaint, as supplemented, alleges violations of section 337 based upon the importation into the United States, the sale for importation, and the sale within the United States after importation of certain LED landscape lighting devices, components thereof, and products containing same by reason of the infringement of certain claims of U.S. Patent No. 10,920,971 (the ‘‘’971 Patent’’), U.S. Patent No. 10,969,088, and 11,274,816. The Commission’s notice of investigation named as the respondent Hinkley Lighting, Inc. (‘‘Hinkley’’) of Avon Lake, Ohio. Id. The Office of Unfair Import Investigations was not named as a party in this investigation. Id. On June 6, 2023, WAC and Hinkley jointly moved to terminate the investigation in its entirety based upon a settlement agreement. On June 8, 2023, the CALJ issued the subject ID granting the motion. The ID found that the motion complies with the requirements of 19 CFR 210.21(b)(1), including the attachment of confidential and public versions of the parties’ settlement agreement. ID at 1–2. The ID also found ‘‘no evidence that terminating this investigation based on settlement would adversely affect the public health and welfare, competitive conditions in the United States economy, the production of like or directly competitive articles in the United States, or United States consumers.’’ Id. at 2–3. No petitions for review of the ID were filed. The Commission has determined not to review the subject ID. The investigation is terminated in its entirety. The Commission vote for this determination took place on July 6, 2023. The authority for the Commission’s determination is contained in section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in Part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: July 6, 2023. Lisa Barton, Secretary to the Commission. [FR Doc. 2023–14671 Filed 7–11–23; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–1288] Certain Playards and Strollers; Notice of a Commission Determination To Review in Part a Final Initial Determination Finding a Violation; Request for Written Submissions on the Issues Under Review and on Remedy, the Public Interest, and Bonding; Extension of Target Date AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission (‘‘Commission’’) has determined to review in part a final initial determination (‘‘ID’’) of the presiding administrative law judge (‘‘ALJ’’), finding a violation. The Commission requests written submissions from the parties on the issues under review and submissions from the parties, interested government agencies, and other interested persons on the issues of remedy, the public interest, and bonding, under the schedule set forth below. The Commission has also determined to extend the target date for completion of the investigation to August 28, 2023. FOR FURTHER INFORMATION CONTACT : Benjamin S. Richards, Esq., Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 708–5453. Copies of non-confidential documents filed in connection with this investigation may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For help accessing EDIS, please email EDIS3Help@usitc.gov. General information concerning the Commission may also be obtained by accessing its internet server at https://www.usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission instituted this investigation by publication in the Federal Register on December 27, 2021. 86 FR 73318 (Dec. 27, 2021). The complainants are VerDate Sep<11>2014 17:29 Jul 11, 2023 Jkt 259001 PO 00000 Frm 00147 Fmt 4703 Sfmt 4703 E:\FR\FM\12JYN1.SGM 12JYN1 lotter on DSK11XQN23PROD with NOTICES1
Active order issued from this investigation
Investigation 701-TA-575 is a U.S. International Trade Commission antidumping (AD) proceeding on Tool Chests and Cabinets from China and Vietnam; Inv. No. 701-TA-575 and 731-TA-1360-1361 (Review) from Vietnam, China. The ITC determines whether U.S. industry is materially injured (or threatened) by imports under investigation; Commerce determines whether dumping or subsidization is occurring. Both findings are required for an AD/CVD order to be issued.
701-TA-575 is in the review phase, with status completed. Review phase — typically a sunset review (every 5 years) to determine whether revoking the order would lead to recurrence of dumping/injury. Affirmative findings keep the order in force; negative findings revoke it.
Yes — investigation 701-TA-575 resulted in AD/CVD case A-552-821. The linked order page on this catalog has the active deposit rate, scope text, and Federal Register citation.
Tandom guides relevant to AD/CVD investigations
Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.
Open resource
Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.
Open resource
The USITC publishes investigation determinations and milestones on its Investigations Data Service (IDS) at ids.usitc.gov. Tandom's catalog re-syncs from IDS daily; new phases, votes, and determinations appear here within 24 hours of USITC publication.
Scope text is authoritative; the HTS list is illustrative. Read scope, find past rulings, and file a 19 CFR 351.225 inquiry. Worked example on case A-570-106 (wooden cabinets from China).
Open resource