Finished Carbon Steel Flanges from India, Italy, and Spain; Inv. Nos. 701-TA-563 and 731-TA-1331-1333 (Review)

=== Continuation - AD/CVD - India - Italy - Spain === 74410 Federal Register / Vol. 87, No. 232 / Monday, December 5, 2022 / Notices 3 See Preliminary Results, 87 FR at 47715 (‘‘Preliminary Results of Review’’). 4 Id. 5 See Order. corrosion-resistant flat-rolled steel products less than 4.75 mm in composite thickness that consist of a flat-rolled steel product clad on both sides with stainless steel in a 20 percent-60 percent-20 percent ratio. The products subject to the Order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, and 7212.60.0000. The products subject to the Order may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the Order is dispositive. Final Results of Review Because Commerce received no comments, we made no changes from the Preliminary Results. As a result, Commerce continues to find that Metalco, the sole company subject to this administrative review, has not demonstrated its eligibility for separate rate status because it did not file a no- shipment certification or a separate rate application.3 Therefore, Commerce determines that Metalco is part of the China-wide entity. 4 In this administrative review, no party requested a review of the China-wide entity, and Commerce did not self- initiate a review of the China-wide entity. Because no review of the China- wide entity is being conducted, the China-wide entity’s entries are not subject to this review, and the rate applicable to the China-wide entity was not subject to change as a result of this administrative review. The China-wide entity rate remains 199.43 percent. 5 Assessment Rates Commerce shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries in accordance with 751(a)(2)(C) of the Act and 19 CFR 351.212(b). Because Commerce determined that Metalco is not eligible for a separate rate and is part of the China-wide entity, Commerce will instruct CBP to apply an ad valorem assessment rate of 199.43 percent to all POR entries of subject merchandise that were exported by Metalco. Commerce intends to issue assessment instructions to CBP no earlier than 35 days after the date of publication of these final results in the Federal Register. If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired (i.e., within 90 days of publication of this notice in the Federal Register). Cash Deposit Requirements The following cash deposit requirements will be effective for all shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) for previously investigated or reviewed Chinese or non-Chinese exporters that received a separate rate in a prior segment of this proceeding, the cash deposit rate will continue to be the existing exporter-specific rate; (2) for all Chinese exporters of subject merchandise that have not been found to be entitled to a separate rate, the cash deposit rate will be that for the China- wide entity (i.e., 199.43 percent); and (3) for all non-Chinese exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the Chinese exporter that supplied that non-Chinese exporter. These deposit requirements, when imposed, shall remain in effect until further notice. Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping and/or countervailing duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in Commerce’s presumption that reimbursement of antidumping and/or countervailing duties occurred and the subsequent assessment of double antidumping duties, and/or an increase in the amount of antidumping duties by the amount of the countervailing duties. Administrative Protective Order This notice also serves as a final reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/ destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Notification to Interested Parties We are issuing and publishing these final results in accordance with sections 751(a)(1) and 777(i) of the Act, and 19 CFR 351.213(h) and 19 CFR 351.221(b)(5). Dated: November 25, 2022. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–26406 Filed 12–2–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–533–871, A–475–835, A–469–815, C–533– 872] Finished Carbon Steel Flanges From India, Italy, and Spain: Continuation of Antidumping Duty Orders and Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) orders on finished carbon steel flanges (flanges) from India, Italy, and Spain and countervailing duty (CVD) order on flanges from India would likely lead to continuation or recurrence of dumping, net countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD and CVD orders. DATES : Applicable November 30, 2022. FOR FURTHER INFORMATION CONTACT : James Hepburn or Emily Bradshaw, AD/ CVD Operations, Office VI, Enforcement VerDate Sep<11>2014 19:34 Dec 02, 2022 Jkt 259001 PO 00000 Frm 00020 Fmt 4703 Sfmt 4703 E:\FR\FM\05DEN1.SGM 05DEN1 ddrumheller on DSK30NT082PROD with NOTICES 74411Federal Register / Vol. 87, No. 232 / Monday, December 5, 2022 / Notices 1 See Finished Carbon Steel Flanges from Spain: Antidumping Duty Order, 82 FR 27229 (June 14, 2017); Finished Carbon Steel Flanges from India and Italy: Antidumping Duty Orders, 82 FR 40136 (August 24, 2017); and Finished Carbon Steel Flanges from India: Countervailing Duty Order, 82 FR 40138 (August 24, 2017) (collectively, Orders). 2 See Finished Carbon Steel Flanges from India, Italy, and Spain; Institution of Five-Year Reviews, 87 FR 25662 (May 2, 2022). 3 See Initiation of Five-Year (Sunset) Reviews, 87 FR 25617, 25618 (May 2, 2022). 4 See Finished Carbon Steel Flanges from India, Italy, and Spain: Final Results of the Expedited First Sunset Review of the Antidumping Duty Orders, 87 FR 52910 (August 30, 2022), and accompanying Issues and Decision Memorandum (IDM); and Finished Carbon Steel Flanges from India: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 87 FR 53722 (September 1, 2022), and accompanying IDM. 5 See Finished Carbon Steel Flanges from India, Italy, and Spain, 87 FR 70866 (November 21, 2022). and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–1882 or (202) 482–3896, respectively. SUPPLEMENTARY INFORMATION : Background On June 14, 2017, Commerce published in the Federal Register the AD order on flanges from Spain, and on August 24, 2017, Commerce published in the Federal Register the AD orders on flanges from India and Italy and the CVD order on flanges from India. 1 On May 2, 2022, the ITC instituted, 2 and Commerce initiated, 3 the first sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and net countervailable subsidy rates likely to prevail should the Orders be revoked. 4 On November 21, 2022, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 5 Scope of the Orders The scope of the Orders covers finished carbon steel flanges. Finished carbon steel flanges differ from unfinished carbon steel flanges (also known as carbon steel flange forgings) in that they have undergone further processing after forging, including, but not limited to, beveling, bore threading, center or step boring, face machining, taper boring, machining ends or surfaces, drilling bolt holes, and/or de- burring or shot blasting. Any one of these post-forging processes suffices to render the forging into a finished carbon steel flange for purposes of the Orders. However, mere heat treatment of a carbon steel flange forging (without any other further processing after forging) does not render the forging into a finished carbon steel flange for purposes of the Orders. While these finished carbon steel flanges are generally manufactured to specification ASME B16.5 or ASME B16.47 series A or series B, the scope is not limited to flanges produced under those specifications. All types of finished carbon steel flanges are included in the scope regardless of pipe size (which may or may not be expressed in inches of nominal pipe size), pressure class (usually, but not necessarily, expressed in pounds of pressure, e.g., 150, 300, 400, 600, 900, 1500, 2500, etc.), type of face (e.g., flat face, full face, raised face, etc.), configuration (e.g., weld neck, slip on, socket weld, lap joint, threaded, etc.), wall thickness (usually, but not necessarily, expressed in inches), normalization, or whether or not heat treated. These carbon steel flanges either meet or exceed the requirements of the ASTM A105, ASTM A694, ASTM A181, ASTM A350 and ASTM A707 standards (or comparable foreign specifications). The scope includes any flanges produced to the above-referenced ASTM standards as currently stated or as may be amended. The term ‘‘carbon steel’’ under this scope is steel in which: (a) Iron predominates, by weight, over each of the other contained elements: (b) The carbon content is 2 percent or less, by weight; and (c) none of the elements listed below exceeds the quantity, by weight, as indicated: (i) 0.87 percent of aluminum; (ii) 0.0105 percent of boron; (iii) 10.10 percent of chromium; (iv) 1.55 percent of columbium; (v) 3.10 percent of copper; (vi) 0.38 percent of lead; (vii) 3.04 percent of manganese; (viii) 2.05 percent of molybdenum; (ix) 20.15 percent of nickel; (x) 1.55 percent of niobium; (xi) 0.20 percent of nitrogen; (xii) 0.21 percent of phosphorus; (xiii) 3.10 percent of silicon; (xiv) 0.21 percent of sulfur; (xv) 1.05 percent of titanium; (xvi) 4.06 percent of tungsten; (xvii) 0.53 percent of vanadium; or (xviii) 0.015 percent of zirconium. Finished carbon steel flanges are currently classified under subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also be entered under HTSUS subheadings 7307.91.5030 and 7307.91.5070. The HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping, net countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders will be November 30, 2022. Pursuant to section 751(c)(2) of the Act, Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to the fifth anniversary of the effective date of continuation. Administrative Protective Order This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return/destruction or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply with the regulations and terms of the APO is a sanctionable violation. Notification to Interested Parties These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4). Dated: November 29, 2022. Lisa Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–26401 Filed 12–2–22; 8:45 am] BILLING CODE 3510–DS–P VerDate Sep<11>2014 19:34 Dec 02, 2022 Jkt 259001 PO 00000 Frm 00021 Fmt 4703 Sfmt 9990 E:\FR\FM\05DEN1.SGM 05DEN1 ddrumheller on DSK30NT082PROD with NOTICES ──────────────────────────────────────────────────────────── === USITC Determination === 70866 Federal Register / Vol. 87, No. 223 / Monday, November 21, 2022 / Notices 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). Issued: November 15, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–25250 Filed 11–18–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. 731–TA–1315 (Review)] Ferrovanadium From South Korea Determination On the basis of the record 1 developed in the subject five-year review, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the antidumping duty order on ferrovanadium from South Korea would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted this review on April 1, 2022 (87 FR 19129) and determined on July 5, 2022 that it would conduct an expedited review (87 FR 63090, October 18, 2022). The Commission made this determination pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determination in this review on November 15, 2022. The views of the Commission are contained in USITC Publication 5384 (November 2022), entitled Ferrovanadium from South Korea: Investigation No. 731–TA– 1315 (Review). By order of the Commission. Issued: November 15, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–25249 Filed 11–18–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–563 and 731– TA–1331–1333 (Review)] Finished Carbon Steel Flanges From India, Italy, and Spain Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing duty order on finished carbon steel flanges from India and the antidumping duty orders on finished carbon steel flanges from India, Italy, and Spain would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on May 2, 2022 (87 FR 25662) and determined on August 5, 2022 that it would conduct expedited reviews (87 FR 63798, October 20, 2022). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on November 15, 2022. The views of the Commission are contained in USITC Publication 5385 (November 2022), entitled Finished Carbon Steel Flanges from India, Italy, and Spain: Investigation Nos. 701–TA– 563 and 731–TA–1331–1333 (Review). By order of the Commission. Issued: November 15, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–25247 Filed 11–18–22; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE Notice of Task Force on Research on Violence Against American Indian and Alaska Native Women Meeting AGENCY : Office on Violence Against Women, United States Department of Justice. ACTION : Notice of meeting. SUMMARY : The Office on Violence Against Women (OVW), U.S. Department of Justice has scheduled a meeting of the Task Force on Research on Violence Against American Indian and Alaska Native Women (hereinafter ‘‘the Task Force’’). DATES : The meeting will take place on December 13, 2022, from 1 p.m. to 5 p.m. (Eastern Standard Time). ADDRESSES : This meeting will be convened virtually. FOR FURTHER INFORMATION CONTACT : Visit the OVW website at https:// www.justice.gov/ovw/section-904-task- force or contact Sherriann Moore, Deputy Director of Tribal Affairs, Office on Violence Against Women, United States Department of Justice, at (202) 616–0039 or ovw.tribalaffairs@ usdoj.gov. SUPPLEMENTARY INFORMATION : Notice of this meeting is required under section 10(a)(2) of the Federal Advisory Committee Act. Title IX of the Violence Against Women Act of 2005 (VAWA 2005), as amended, required the Attorney General to establish a task force to assist the National Institute of Justice (NIJ) in developing and implementing a program of research on violence against American Indian and Alaska Native women, including domestic violence, dating violence, sexual assault, stalking, sex trafficking, and murder. The program will evaluate the effectiveness of the federal, state, tribal, and local response to violence against Indian women and propose recommendations to improve the government response. The Attorney General, acting through the Director of the Office on Violence Against Women, established the Task Force on March 31, 2008, and the charter has been renewed every two years since then. More information on the Task Force may be found at https:// www.justice.gov/ovw/section-904-task- force and about the NIJ program of research at: https://nij.ojp.gov/topics/ articles/violence-against-american- indian-and-alaska-native-women- program-research. This meeting will include the introduction of Task Force members, an update on NIJ’s research program, and facilitated Task Force discussion on research findings and recommendations. In addition, the Task Force is also welcoming public oral comment at this meeting and has reserved 30 minutes for this. The meeting will take place on December 13, 2022, from 1 p.m. to 5 p.m. Time will be reserved for public comment from 4:15 p.m. to 4:45 p.m. See the section below for information on reserving time for public comment. Access: The meeting will be available online via a video conferencing platform. Members of the public who wish to participate must register in advance of the meeting online, no later than December 7, 2022. Details about registration can be found on the OVW website: https://www.justice.gov/ovw/ section-904-task-force. Should issues arise with online or email registration, the public should contact Sherriann C. Moore, Deputy Director of Tribal Affairs, Office on Violence Against Women, at (202) 616–0039 or ovw.tribalaffairs@usdoj.gov. Written Comments: Interested parties are invited to submit written comments by December 7, 2022, to Sherriann C. VerDate Sep<11>2014 21:25 Nov 18, 2022 Jkt 259001 PO 00000 Frm 00097 Fmt 4703 Sfmt 4703 E:\FR\FM\21NON1.SGM 21NON1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Scheduling === 63798 Federal Register / Vol. 87, No. 202 / Thursday, October 20, 2022 / Notices 1 Handbook for Electronic Filing Procedures: https://www.usitc.gov/documents/handbook_on_ filing_procedures.pdf 2 All contract personnel will sign appropriate nondisclosure agreements. 3 Electronic Document Information System (EDIS): https://edis.usitc.gov Commission’s TDD terminal on (202) 205–1810. SUPPLEMENTARY INFORMATION : The Commission has received a complaint and a submission pursuant to § 210.8(b) of the Commission’s Rules of Practice and Procedure filed on behalf Bell Semiconductor, LLC on October 14, 2022. The complaint alleges violations of section 337 of the Tariff Act of 1930 (19 U.S.C. 1337) in the importation into the United States, the sale for importation, and the sale within the United States after importation of regarding certain semiconductor devices having layered dummy fill, electronic devices, and components thereof. The complainant names as respondents: Analog Devices Inc. of Norwood, MA; Bose Corporation of Framingham, MA; Marvell Technology Group, Ltd. of Bermuda; Marvell Semiconductor, Inc. of Santa Clara, CA; Suteng Innovation Technology Co., Ltd. d/b/a RoboSense of China; Kioxia Corporation of Japan; Kioxia America, Inc. of San Jose, CA; MaxLinear, Inc. of Carlsbad, CA; Linskys USA, Inc. of Irvine, CA; MACOM Technology Solutions, Inc. of Lowell, MA; Silicon Laboratories, Inc. of Austin, TX; DENSO Corporation of Japan; Skyworks Solutions, Inc. of Irvine, CA; OmniVision Technologies, Inc. of Santa Clara, CA; and Arlo Technologies, Inc. of Milpitas, CA. The complainant requests that the Commission issue a limited exclusion order, cease and desist orders, and impose a bond upon respondent’s alleged infringing articles during the 60- day Presidential review period pursuant to 19 U.S.C. 1337(j). Proposed respondents, other interested parties, and members of the public are invited to file comments on any public interest issues raised by the complaint or § 210.8(b) filing. Comments should address whether issuance of the relief specifically requested by the complainant in this investigation would affect the public health and welfare in the United States, competitive conditions in the United States economy, the production of like or directly competitive articles in the United States, or United States consumers. In particular, the Commission is interested in comments that: (i) explain how the articles potentially subject to the requested remedial orders are used in the United States; (ii) identify any public health, safety, or welfare concerns in the United States relating to the requested remedial orders; (iii) identify like or directly competitive articles that complainant, its licensees, or third parties make in the United States which could replace the subject articles if they were to be excluded; (iv) indicate whether complainant, complainant’s licensees, and/or third party suppliers have the capacity to replace the volume of articles potentially subject to the requested exclusion order and/or a cease and desist order within a commercially reasonable time; and (v) explain how the requested remedial orders would impact United States consumers. Written submissions on the public interest must be filed no later than by close of business, eight calendar days after the date of publication of this notice in the Federal Register. There will be further opportunities for comment on the public interest after the issuance of any final initial determination in this investigation. Any written submissions on other issues must also be filed by no later than the close of business, eight calendar days after publication of this notice in the Federal Register. Complainant may file replies to any written submissions no later than three calendar days after the date on which any initial submissions were due. No other submissions will be accepted, unless requested by the Commission. Any submissions and replies filed in response to this Notice are limited to five (5) pages in length, inclusive of attachments. Persons filing written submissions must file the original document electronically on or before the deadlines stated above. Submissions should refer to the docket number (‘‘Docket No. 3649’’) in a prominent place on the cover page and/or the first page. (See Handbook for Electronic Filing Procedures, Electronic Filing Procedures.)1 Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https://edis.usitc.gov.) No in-person paper-based filings or paper copies of any electronic filings will be accepted until further notice. Persons with questions regarding filing should contact the Secretary at EDIS3Help@ usitc.gov. Any person desiring to submit a document to the Commission in confidence must request confidential treatment. All such requests should be directed to the Secretary to the Commission and must include a full statement of the reasons why the Commission should grant such treatment. See 19 CFR 201.6. Documents for which confidential treatment by the Commission is properly sought will be treated accordingly. All information, including confidential business information and documents for which confidential treatment is properly sought, submitted to the Commission for purposes of this Investigation may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel,2 solely for cybersecurity purposes. All nonconfidential written submissions will be available for public inspection at the Office of the Secretary and on EDIS. 3 This action is taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and of §§ 201.10 and 210.8(c) of the Commission’s Rules of Practice and Procedure (19 CFR 201.10, 210.8(c)). By order of the Commission. Issued: October 17, 2022. Jessica Mullan, Attorney Advisor. [FR Doc. 2022–22805 Filed 10–19–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–563 and 731– TA–1331–1333 (Review)] Finished Carbon Steel Flanges From India, Italy, and Spain; Scheduling of Expedited Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of expedited reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether revocation of the countervailing duty order on finished carbon steel flanges from India and the antidumping duty orders on finished carbon steel flanges from India, Italy, and Spain would be likely to lead to continuation or VerDate Sep<11>2014 16:50 Oct 19, 2022 Jkt 259001 PO 00000 Frm 00039 Fmt 4703 Sfmt 4703 E:\FR\FM\20OCN1.SGM 20OCN1 lotter on DSK11XQN23PROD with NOTICES1 63799Federal Register / Vol. 87, No. 202 / Thursday, October 20, 2022 / Notices 1 A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s website. 2 The Commission has found the responses submitted by Weldbend Corporation and Boltex Manufacturing Company Inc., domestic producers, to be individually adequate. Comments from other interested parties will not be accepted (see 19 CFR 207.62(d)(2)). recurrence of material injury within a reasonably foreseeable time. DATES : August 5, 2022. FOR FURTHER INFORMATION CONTACT : Caitlyn Hendricks-Costello (202–205– 2058), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these reviews may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On August 5, 2022, the Commission determined that the domestic interested party group response to its notice of institution (87 FR 25662, May 2, 2022) of the subject five-year reviews was adequate and that the respondent interested party group response was inadequate. The Commission did not find any other circumstances that would warrant conducting full reviews. 1 Accordingly, the Commission determined that it would conduct expedited reviews pursuant to section 751(c)(3) of the Tariff Act of 1930 (19 U.S.C. 1675(c)(3)). For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Staff report.—A staff report containing information concerning the subject matter of the reviews has been placed in the nonpublic record, and will be made available to persons on the Administrative Protective Order service list for these reviews on October 14, 2022. A public version will be issued thereafter, pursuant to § 207.62(d)(4) of the Commission’s rules. Written submissions.—As provided in § 207.62(d) of the Commission’s rules, interested parties that are parties to the reviews and that have provided individually adequate responses to the notice of institution,2 and any party other than an interested party to the reviews may file written comments with the Secretary on what determination the Commission should reach in the reviews. Comments are due on or before October 21, 2022 and may not contain new factual information. Any person that is neither a party to the five-year reviews nor an interested party may submit a brief written statement (which shall not contain any new factual information) pertinent to these reviews by October 21, 2022. However, should the Department of Commerce (‘‘Commerce’’) extend the time limit for its completion of the final results of its reviews, the deadline for comments (which may not contain new factual information) on Commerce’s final results is three business days after the issuance of Commerce’s results. If comments contain business proprietary information (BPI), they must conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. In accordance with §§ 201.16(c) and 207.3 of the rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. Determination.—The Commission has determined these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: October 14, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–22752 Filed 10–19–22; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE Bureau of Alcohol, Tobacco, Firearms and Explosives [OMB Number 1140–0011] Agency Information Collection Activities; Proposed eCollection of eComments Requested; Revision of a Previously Approved Collection: Application To Make and Register a Firearm—ATF Form 1 (5320.1) AGENCY : Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of Justice. ACTION : 30-Day notice. SUMMARY : The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), Department of Justice (DOJ) will submit the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995. The proposed information collection (IC) OMB 1140–0011 (Application to Make and Register a Firearm—ATF Form 1 (5320.1) is being revised to include changes due to formatting, additional definitions, updates to the instructions, and additional sub- questions required to comply with the Bipartisan Safer Communities Act. Comments were previously requested by notice published in the Federal Register on August 31, 2022. The proposed IC is also being published to obtain comments from the public and affected agencies. DATES : Comments were previously requested by notice published in the Federal Register on August 31, 2022 at 87 FR 53490. Comments are encouraged and will be accepted for an additional 30 days until November 21, 2022. ADDRESSES : Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to www.reginfo.gov/public/do/ PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function. SUPPLEMENTARY INFORMATION : Written comments and suggestions from the public and affected agencies concerning the proposed collection of information are encouraged. Your comments should address one or more of the following four points: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including VerDate Sep<11>2014 16:50 Oct 19, 2022 Jkt 259001 PO 00000 Frm 00040 Fmt 4703 Sfmt 4703 E:\FR\FM\20OCN1.SGM 20OCN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === USITC Institution === 25662 Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices SUMMARY : The plats of survey of the following described lands were officially filed in the Bureau of Land Management (BLM), Arizona State Office, Phoenix, Arizona on the dates indicated. The surveys announced in this notice are necessary for the management of lands administered by the agency indicated. ADDRESSES : These plats will be available for inspection in the Arizona State Office, Bureau of Land Management, One North Central Avenue, Suite 800, Phoenix, Arizona 85004–4427. Protests of any of these surveys should be sent to the Arizona State Director at the above address. FOR FURTHER INFORMATION CONTACT : Geoff Graham, Chief Cadastral Surveyor of Arizona; (623) 580–5579; ggraham@ blm.gov. Persons who use a telecommunications device for the deaf may call the Federal Relay Service (FRS) at 7–1–1 to leave a message or question for the above individual. The FRS is available 24 hours a day, 7 days a week. You will receive a reply during normal business hours. SUPPLEMENTARY INFORMATION : The Gila and Salt River Meridian, Arizona The plat, in one sheet, representing the dependent resurvey of the boundary of Tracts 38 and 39, and the metes-and- bounds survey of Tract 40, partially surveyed Township 11 North, Range 11 East, accepted December 8, 2021, and officially filed January 11, 2022, for Group 1217, Arizona. This plat was prepared at the request of the United States Forest Service. The plat, in two sheets, representing the dependent resurvey of a portion of the Hopi and Navajo Partition Line, the completion surveys of the north and west boundaries, the survey of the south boundary and the subdivisional lines, and the subdivision of certain sections, partially surveyed Township 30 North, Range 12 East, accepted December 8, 2021, and officially filed January 11, 2022, for Group 1209, Arizona. This plat was prepared at the request of the Bureau of Land Management. A person or party who wishes to protest against any of these surveys must file a written notice of protest within 30 calendar days from the date of this publication with the Arizona State Director, Bureau of Land Management, stating that they wish to protest. A statement of reasons for a protest may be filed with the notice of protest to the State Director, or the statement of reasons must be filed with the State Director within 30 days after the protest is filed. Before including your address, or other personal information in your protest, please be aware that your entire protest, including your personal identifying information, may be made publicly available at any time. While you can ask us in your comment to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Authority: 43 U.S.C. chap. 3. Geoffrey Graham, Chief Cadastral Surveyor of Arizona. [FR Doc. 2022–09321 Filed 4–29–22; 8:45 am] BILLING CODE 4310–32–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–563 and 731– TA–1331–1333 (Review)] Finished Carbon Steel Flanges From India, Italy, and Spain; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing duty order on finished carbon steel flanges from India and the antidumping duty orders on finished carbon steel flanges from India, Italy, and Spain would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted May 2, 2022. To be assured of consideration, the deadline for responses is June 1, 2022. Comments on the adequacy of responses may be filed with the Commission by July 14, 2022. FOR FURTHER INFORMATION CONTACT : Caitlyn Hendricks (202–205–2058), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On June 14, 2017, the Department of Commerce (‘‘Commerce’’) issued an antidumping duty order on finished carbon steel flanges from Spain (82 FR 27229). On August 24, 2017, Commerce issued a countervailing duty order on finished carbon steel flanges from India (82 FR 40138) and antidumping duty orders on finished carbon steel flanges from India and Italy (82 FR 40136). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Countries in these reviews are India, Italy, and Spain. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, the Commission defined a single Domestic Like Product consisting of flanges coextensive with Commerce’s scope. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, the Commission defined one Domestic Industry consisting of all domestic producers of flanges, except for one firm, which was excluded from the Domestic Industry as a related party. VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00047 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 25663Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices (5) The Order Dates are the dates that the antidumping and countervailing duty orders under review became effective. In these reviews, the Order Date concerning finished carbon steel flanges from Spain is June 14, 2017, and the Order Date concerning finished carbon steel flanges from India and Italy is August 24, 2017. (6) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) By the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is June 1, 2022. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct expedited or full reviews. The deadline for filing such comments is July 14, 2022. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https://www.usitc.gov/documents/ handbook_on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 22–5–526, expiration date June 30, 2023. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determinations in the reviews. Information to be provided in response to this notice of institution: If you are a domestic producer, union/ worker group, or trade/business association; import/export Subject Merchandise from more than one Subject Country; or produce Subject Merchandise in more than one Subject Country, you may file a single response. If you do so, please ensure that your response to each question includes the information requested for each pertinent VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00048 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 25664 Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices Subject Country. As used below, the term ‘‘firm’’ includes any related firms. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the antidumping and countervailing duty orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in § 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in each Subject Country that currently export or have exported Subject Merchandise to the United States or other countries since the Order Dates. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2021, except as noted (report quantity data in pounds and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in pounds and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject Merchandise imported from each Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from each Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2021 (report quantity data in pounds and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in each Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in each Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in each Subject Country since the Order Dates, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00049 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 25665Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in each Subject Country, and such merchandise from other countries. (13) (Optional) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: April 26, 2022. Lisa Barton, Secretary to the Commission. [FR Doc. 2022–09278 Filed 4–29–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731–TA–1064 and 1066– 1068 (Third Review)] Frozen Warmwater Shrimp From China, India, Thailand, and Vietnam; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the antidumping duty orders on frozen warmwater shrimp from China, India, Thailand, and Vietnam would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted May 2, 2022. To be assured of consideration, the deadline for responses is June 1, 2022. Comments on the adequacy of responses may be filed with the Commission by July 14, 2022. FOR FURTHER INFORMATION CONTACT : Tyler Berard (202–205–3354), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On February 1, 2005, the Department of Commerce (‘‘Commerce’’) issued antidumping duty orders on imports of frozen warmwater shrimp from China, India, Thailand, and Vietnam (70 FR 5145–5156). Commerce issued a continuation of the antidumping duty orders on imports of frozen warmwater shrimp from China, India, Thailand, and Vietnam following the first five-year reviews by Commerce and the Commission, effective April 29, 2011 (76 FR 23972), and the second five-year reviews, effective June 1, 2017 (82 FR 25242). The Commission is now conducting third reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Countries in these reviews are China, India, Thailand, and Vietnam. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original affirmative determinations and its full first and second five-year review determinations, the Commission defined a single Domestic Like Product encompassing fresh warmwater shrimp and those frozen warmwater shrimp products described in Commerce’s scope definition. Certain Commissioners defined the Domestic Like Product differently in the original determinations. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original affirmative determinations and its full first and second five-year review determinations, the Commission defined the Domestic Industry to consist of: (1) All entities that harvest fresh warmwater shrimp (i.e., fishermen and shrimp farmers) and (2) all processors of frozen shrimp products within the scope definition, except for firms that do not engage in sufficient production-related activities to be considered domestic producers. The Commission found that processing activities such as deheading, grading, machine peeling, deveining, and cooking all constitute domestic production but that marinating and skewering did not constitute domestic production. The Commission also concluded that breading did not constitute domestic production activity because breaded shrimp was not part of the Domestic Like Product. In addition, five firms were excluded by the Commission from the Domestic Industry pursuant to the related parties provision in the original determinations and one firm was excluded from the Domestic Industry in the full first five-year review determinations. (5) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00050 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Initiation === 25617Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices 8339 and providing the Service with the conference call number and conference ID number. Members of the public are also entitled to submit written comments via email. The comments must be received in the regional office within 30 days following the meeting. Written comments may be emailed. The email subject line should state: Atten: IN and sent to this email address: ero@ usccr.gov. Persons who desire additional information may contact the Eastern Regional Office at ero@ usccr.gov. Records generated from this meeting may be inspected and reproduced at the Eastern Regional Programs, as they become available, both before and after the meeting. Records of the meeting will be available via www.facadatabase.gov under the Commission on Civil Rights, Indiana Advisory Committee link. Persons interested in the work of this Committee are directed to the Commission’s website, http:// www.usccr.gov, or may contact the Eastern Regional Office at the above email address. Agenda I. Roll Call II. Welcome III. Project Planning IV. Other Business V. Next Meeting VI. Public Comments VII. Adjourn Dated: April 27, 2022. David Mussatt, Supervisory Chief, Regional Programs Unit. [FR Doc. 2022–09350 Filed 4–29–22; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Census Bureau Agency Information Collection Activities; Submission to the Office of Management and Budget (OMB) for Review and Approval; Comment Request; U.S. Census—Age Search The Department of Commerce will submit the following information collection request to the Office of Management and Budget (OMB) for review and clearance in accordance with the Paperwork Reduction Act of 1995, on or after the date of publication of this notice. We invite the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. Public comments were previously requested via the Federal Register on December 28, 2021 during a 60-day comment period. This notice allows for an additional 30 days for public comments. Agency: U.S. Census Bureau, Department of Commerce. Title: U.S. Census-Age Search. OMB Control Number: 0607–0117. Form Number(s): BC–600, BC– 600(SP), BC–649L, and BC–658L. Type of Request: Regular submission, Request for an Extension without Change of a Currently Approved Collection. Number of Respondents: 2,885. Average Hours per Response: BC– 600—12 minutes, BC–649L—6 minutes, BC–658L—6 minutes. Burden Hours: 531. Needs and Uses: To locate records for individuals who need proof of age to qualify for Federal programs that require this information. Affected Public: Individuals or households that need certified proof of age documents. Frequency: On an as needed basis. Respondent’s Obligation: Voluntary. Legal Authority: Section 8(a) of Title 13. This information collection request may be viewed at www.reginfo.gov. Follow the instructions to view the Department of Commerce collections currently under review by OMB. Written comments and recommendations for the proposed information collection should be submitted within 30 days of the publication of this notice on the following website www.reginfo.gov/ public/do/PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function and entering either the title of the collection or the OMB Control Number 0607–0117. Sheleen Dumas, Department PRA Clearance Officer, Office of the Chief Information Officer, Commerce Department. [FR Doc. 2022–09334 Filed 4–29–22; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–17–2022] Foreign-Trade Zone 61—San Juan, Puerto Rico; Application for Subzone; DB Research Group, LLC; Caguas, Puerto Rico An application has been submitted to the Foreign-Trade Zones (FTZ) Board by the Department of Economic Development and Commerce, grantee of FTZ 61, requesting subzone status for the facility of DB Research Group, LLC, located in Caguas, Puerto Rico. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on April 26, 2022. The proposed subzone (1.126 acres) is located at Lot 32, Rio Can˜ as Industrial Park, Caguas, Puerto Rico. No authorization for production activity has been requested at this time. In accordance with the FTZ Board’s regulations, Camille Evans and Christopher Wedderburn of the FTZ Staff are designated examiners to review the application and make recommendations to the FTZ Board. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is June 13, 2022. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to June 27, 2022. A copy of the application will be available for public inspection in the ‘‘Online FTZ Information Section’’ section of the FTZ Board’s website, which is accessible via www.trade.gov/ ftz. For further information, contact Camille Evans and Christopher Wedderburn at Camille.Evans@ trade.gov and Chris.Wedderburn@ trade.gov. Dated: April 27, 2022. Andrew McGilvray, Executive Secretary. [FR Doc. 2022–09362 Filed 4–29–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In accordance with the Tariff Act of 1930, as amended (the Act), the Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping duty (AD) and countervailing duty (CVD) order(s) and suspended investigation(s) listed below. The International Trade Commission VerDate Sep<11>2014 18:24 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 25618 Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19, 85 FR 41363 (July 10, 2020). 2 See 19 CFR 351.218(d)(1)(iii). (the ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable May 2, 2022. FOR FURTHER INFORMATION CONTACT : Commerce official identified in the Initiation of Review section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Act and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following antidumping and countervailing duty order(s) and suspended investigation(s): DOC case No. ITC case No. Country Product Commerce contact A–533–871 ....... 731–TA–1331 India .................. Finished Carbon Steel Flanges (1st Review) ..... Jacky Arrowsmith, (202) 482–5255. A–475–835 ....... 731–TA–1332 Italy ................... Finished Carbon Steel Flanges (1st Review) ..... Jacky Arrowsmith, (202) 482–5255. A–469–815 ....... 731–TA–1333 Spain ................ Finished Carbon Steel Flanges (1st Review) ..... Jacky Arrowsmith, (202) 482–5255. A–570–893 ....... 731–TA–1064 China ................ Frozen Warmwater Shrimp (3rd Review) ........... Mary Kolberg, (202) 482–1785. A–533–840 ....... 731–TA–1066 India .................. Frozen Warmwater Shrimp (3rd Review) ........... Mary Kolberg, (202) 482–1785. A–549–822 ....... 731–TA–1067 Thailand ............ Frozen Warmwater Shrimp (3rd Review) ........... Mary Kolberg, (202) 482–1785. A–552–802 ....... 731–TA–1068 Vietnam ............ Frozen Warmwater Shrimp (3rd Review) ........... Mary Kolberg, (202) 482–1785. A–533–808 ....... 731–TA–638 India .................. Stainless Steel Wire Rod (5th Review) .............. Mary Kolberg, (202) 482–1785. A–583–815 ....... 731–TA–541 Taiwan .............. Welded Stainless Steel Pipe (1st Review) ......... Jacky Arrowsmith, (202) 482–5255. A–580–810 ....... 731–TA–540 South Korea ..... Welded Stainless Steel Pipe (1st Review) ......... Jacky Arrowsmith, (202) 482–5255. C–533–872 ....... 701–TA–563 India .................. Finished Carbon Steel Flanges (1st Review) ..... Jacky Arrowsmith, (202) 482–5255. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https:// enforcement.trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in section 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 25619Federal Register / Vol. 87, No. 84 / Monday, May 2, 2022 / Notices 1 See Trade Preferences Extension Act of 2015, Public Law 114–27, 129 Stat. 362 (2015). from the ITC ’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR part 351 for definitions of terms and for other general information concerning antidumping and countervailing duty proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: April 11, 2022. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2022–09366 Filed 4–29–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review and Join Annual Inquiry Service List AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. FOR FURTHER INFORMATION CONTACT : Brenda E. Brown, Office of AD/CVD Operations, Customs Liaison Unit, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, telephone: (202) 482–4735. Background Each year during the anniversary month of the publication of an antidumping or countervailing duty order, finding, or suspended investigation, an interested party, as defined in section 771(9) of the Tariff Act of 1930, as amended (the Act), may request, in accordance with 19 CFR 351.213, that the Department of Commerce (Commerce) conduct an administrative review of that antidumping or countervailing duty order, finding, or suspended investigation. All deadlines for the submission of comments or actions by Commerce discussed below refer to the number of calendar days from the applicable starting date. Respondent Selection In the event Commerce limits the number of respondents for individual examination for administrative reviews initiated pursuant to requests made for the orders identified below, Commerce intends to select respondents based on U.S. Customs and Border Protection (CBP) data for U.S. imports during the period of review. We intend to release the CBP data under Administrative Protective Order (APO) to all parties having an APO within five days of publication of the initiation notice and to make our decision regarding respondent selection within 35 days of publication of the initiation Federal Register notice. Therefore, we encourage all parties interested in commenting on respondent selection to submit their APO applications on the date of publication of the initiation notice, or as soon thereafter as possible. Commerce invites comments regarding the CBP data and respondent selection within five days of placement of the CBP data on the record of the review. In the event Commerce decides it is necessary to limit individual examination of respondents and conduct respondent selection under section 777A(c)(2) of the Act: In general, Commerce finds that determinations concerning whether particular companies should be ‘‘collapsed’’ (i.e., treated as a single entity for purposes of calculating antidumping duty rates) require a substantial amount of detailed information and analysis, which often require follow-up questions and analysis. Accordingly, Commerce will not conduct collapsing analyses at the respondent selection phase of a review and will not collapse companies at the respondent selection phase unless there has been a determination to collapse certain companies in a previous segment of this antidumping proceeding (i.e., investigation, administrative review, new shipper review or changed circumstances review). For any company subject to a review, if Commerce determined, or continued to treat, that company as collapsed with others, Commerce will assume that such companies continue to operate in the same manner and will collapse them for respondent selection purposes. Otherwise, Commerce will not collapse companies for purposes of respondent selection. Parties are requested to: (a) Identify which companies subject to review previously were collapsed; and (b) provide a citation to the proceeding in which they were collapsed. Further, if companies are requested to complete a Quantity and Value Questionnaire for purposes of respondent selection, in general each company must report volume and value data separately for itself. Parties should not include data for any other party, even if they believe they should be treated as a single entity with that other party. If a company was collapsed with another company or companies in the most recently completed segment of a proceeding where Commerce considered collapsing that entity, complete quantity and value data for that collapsed entity must be submitted. Deadline for Withdrawal of Request for Administrative Review Pursuant to 19 CFR 351.213(d)(1), a party that requests a review may withdraw that request within 90 days of the date of publication of the notice of initiation of the requested review. The regulation provides that Commerce may extend this time if it is reasonable to do so. Determinations by Commerce to extend the 90-day deadline will be made on a case-by-case basis. Deadline for Particular Market Situation Allegation Section 504 of the Trade Preferences Extension Act of 2015 amended the Act by adding the concept of particular market situation (PMS) for purposes of constructed value under section 773(e) of the Act.1 Section 773(e) of the Act states that ‘‘if a particular market situation exists such that the cost of materials and fabrication or other processing of any kind does not accurately reflect the cost of production in the ordinary course of trade, the administering authority may use another calculation methodology under this subtitle or any other calculation methodology.’’ When an interested party submits a PMS allegation pursuant to section 773(e) of the Act, Commerce will respond to such a submission consistent with 19 CFR 351.301(c)(2)(v). If Commerce finds that a PMS exists under section 773(e) of the Act, then it will modify its dumping calculations appropriately. Neither section 773(e) of the Act nor 19 CFR 351.301(c)(2)(v) set a deadline for the submission of PMS allegations and supporting factual information. However, in order to administer section 773(e) of the Act, Commerce must receive PMS allegations and supporting factual information with enough time to consider the submission. Thus, should an interested party wish to submit a PMS allegation and supporting new factual information pursuant to section 773(e) of the Act, it must do so no later than 20 days after submission of initial Section D responses. VerDate Sep<11>2014 17:20 Apr 29, 2022 Jkt 256001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\02MYN1.SGM 02MYN1 jspears on DSK121TN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - AD - Italy - India - Spain === 52910 Federal Register / Vol. 87, No. 167 / Tuesday, August 30, 2022 / Notices 1 See Non-Oriented Electrical Steel from the Republic of Korea, Certain Corrosion-Resistant Steel Products from the Republic of Korea, Certain Cold- Rolled Steel Flat Products from the Republic of Korea, Certain Hot-Rolled Steel Flat Products from the Republic of Korea, Certain Carbon and Alloy Steel Cut-to-Length Plate from the Republic of Korea, and Carbon and Alloy Steel Wire Rod from the Republic of Korea: Notice of Initiation and Preliminary Results of Antidumping Duty Changed Circumstances Review, 87 FR 41661 (July 13, 2022) (Initiation and Preliminary Results), and accompanying Preliminary Decision Memorandum. 2 See Initiation and Preliminary Results, 87 FR at 41662. 3 Id., 87 FR at 41663. 4 See POSCO(II)’s Letter, ‘‘Non-Oriented Electrical Steel, Certain Corrosion-Resistant Steel Products, Certain Cold-Rolled Steel Flat Products, Certain Hot-Rolled Steel Flat Products, Certain Carbon and Alloy Steel Cut-to-Length Plate, and Carbon and Alloy Steel Wire Rod from the Republic of Korea, Case Nos. A–580–872, A–580–878, A–580–881, A– 580–883, A–580–887, and A–580–891: POSCO’s Case Brief,’’ dated July 27, 2022. entering either the title of the collection or the OMB Control Number 0625–0143. Sheleen Dumas, Department PRA Clearance Officer, Office of the Chief Information Officer, Commerce Department. [FR Doc. 2022–18691 Filed 8–29–22; 8:45 am] BILLING CODE 3510–FP–P DEPARTMENT OF COMMERCE International Trade Administration [A–580–872, A–580–878, A–580–881, A–580– 883, A–580–887, A–580–891] Non-Oriented Electrical Steel From the Republic of Korea, Certain Corrosion- Resistant Steel Products From the Republic of Korea, Certain Cold-Rolled Steel Flat Products From the Republic of Korea, Certain Hot-Rolled Steel Flat Products From the Republic of Korea, Certain Carbon and Alloy Steel Cut-to- Length Plate From the Republic of Korea, and Carbon and Alloy Steel Wire Rod From the Republic of Korea: Final Results of Antidumping Duty Changed Circumstances Review AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : On July 13, 2022, the U.S. Department of Commerce (Commerce) published the notice of initiation and preliminary results of a changed circumstances review (CCR) of the antidumping duty (AD) orders on non- oriented electrical steel, certain corrosion-resistant steel products, certain cold-rolled steel flat products, certain hot-rolled steel flat products, certain carbon and alloy steel cut-to- length plate, and carbon and alloy steel wire rod from the Republic of Korea (Korea). For these final results, Commerce continues to find that POSCO, following a corporate organizational change in March 2022 (hereinafter, POSCO(II)), is the successor-in-interest to the pre- reorganization POSCO entity (hereinafter, POSCO(I)). Furthermore, POSCO(II) is entitled to POSCO(I)’s AD cash deposit rates with respect to entries of subject merchandise in each of the above-referenced proceedings. DATES : Applicable August 30, 2022. FOR FURTHER INFORMATION CONTACT : Christopher Maciuba, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0413. SUPPLEMENTARY INFORMATION : Background On July 13, 2022, Commerce published the Initiation and Preliminary Results,1 finding that POSCO(II) is the successor-in-interest to POSCO(I), and should be assigned the same AD cash deposit rate assigned to POSCO(I) in in each of the above-referenced proceedings. 2 In the Initiation and Preliminary Results, we provided all interested parties with an opportunity to comment and request a public hearing regarding our preliminary finding. 3 POSCO(II) submitted comments agreeing with our preliminary findings in full, and we received no other comments from interested parties.4 Additionally, we received no requests for a public hearing from interested parties. Scope of the Orders The merchandise covered by the orders is non-oriented electrical steel, certain corrosion-resistant steel products, certain cold-rolled steel flat products, certain hot-rolled steel flat products, certain carbon and alloy steel cut-to-length plate, and carbon and alloy steel wire rod from Korea. For a complete description of the scope of each of the respective orders, see the Preliminary Decision Memorandum. Final Results of the Changed Circumstances Review For the reasons stated in the Initiation and Preliminary Results, and because we received no comments from interested parties to the contrary, Commerce continues to find that POSCO(II) is the successor-in-interest to POSCO(I) and is entitled to the same AD cash deposit rate as POSCO(I) with respect to entries of subject merchandise in the above-noted proceedings. Administrative Protective Order This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation. Notification to Interested Parties We are issuing this determination and publishing these final results and notice in accordance with sections 751(b)(1) and 777(i)(1) and (2) of the Tariff Act of 1930, as amended, and 19 CFR 351.216 and 351.221(c)(3). Dated: August 23, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–18581 Filed 8–29–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–533–871; A–475–835; A–469–815] Finished Carbon Steel Flanges From India, Italy, and Spain: Final Results of the Expedited First Sunset Review of the Antidumping Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of these expedited sunset reviews, the U.S. Department of Commerce (Commerce) finds that revocation of the antidumping duty (AD) orders on finished carbon steel flanges (flanges) from India, Italy, and Spain would be likely to lead to continuation or recurrence of dumping at the levels indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable August 30, 2022. FOR FURTHER INFORMATION CONTACT : Harrison Tanchuck or Emily Bradshaw, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–7421 and (202) 482–3896 respectively. SUPPLEMENTARY INFORMATION : VerDate Sep<11>2014 17:24 Aug 29, 2022 Jkt 256001 PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 E:\FR\FM\30AUN1.SGM 30AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52911Federal Register / Vol. 87, No. 167 / Tuesday, August 30, 2022 / Notices 1 See Finished Carbon Steel Flanges from India and Italy: Antidumping Duty Orders, 82 FR 40136 (August 24, 2017); and Finished Carbon Steel Flanges from Spain: Antidumping Duty Order, 82 FR 27229 (June 14, 2017 (collectively, Orders). 2 See Initiation of Five-Year (Sunset) Review, 87 FR 25617 (May 2, 2021) (Initiation Notice). 3 The domestic interested parties are Weldbend Corporation (Weldbend) and Boltex Manufacturing Company Inc. (Boltex) (collectively, domestic interested parties). In 2020, Boltex Manufacturing Co., L.P. reorganized to Boltex Manufacturing Company Inc.). 4 See Domestic Interested Parties’ Letters, ‘‘Finished Carbon Steel Flanges from India: Notice of Intent to Participate by Weldbend Corporation & Boltex Corporation,’’ dated May 17, 2022; ‘‘Finished Carbon Steel Flanges from Italy: Notice of Intent to Participate by Weldbend Corporation & Boltex Manufacturing Co., L.P.,’’ dated May 17, 2022; and ‘‘Finished Carbon Steel Flanges from Spain: Notice of Intent to Participate by Weldbend Corporation & Boltex Manufacturing Co., L.P.,’’ dated May 17, 2022. 5 See Domestic Interested Party’s Letters, ‘‘Finished Carbon Steel Flanges from India: Substantive Response of Domestic Interested Parties,’’ dated June 1, 2022; ‘‘Finished Carbon Steel Flanges from Italy: Substantive Response of Domestic Interested Parties,’’ dated June 1, 2022; and ‘‘Finished Carbon Steel Flanges from Spain: Substantive Response of Domestic Interested Parties,’’ dated June 1, 2022 (collectively, Substantive Response). 6 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on May 2, 2022,’’ dated May 2, 2022. 7 See Memorandum, ‘‘Issues and Decision Memorandum for the Expedited Sunset Review of the Antidumping Duty Orders on Finished Carbon Steel Flanges from India, Italy, and Spain,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 8 Id. Background On May 2, 2022, Commerce published the notice of initiation of the first sunset reviews of the Orders,1 pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). 2 Commerce received a notice of intent to participate from domestic interested parties 3 within the deadline specified in 19 CFR 351.218(d)(1)(i), after the date of publication of the Initiation Notice.4 Each claimed interested party status under section 771(9)(C) of the Act as domestic producers engaged in the production of flanges in the United States. Commerce received a substantive response from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). 5 We did not receive a substantive response from any other interested party in these proceedings. On June 21, 2022, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties. 6 As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of the Orders. Scope of the Orders The products covered by the Orders are finished carbon steel flanges. For a complete description of the scope of these Orders, see the Issues and Decision Memorandum.7 Analysis of Comments Received All issues raised in these sunset reviews are addressed in the Issues and Decision Memorandum, including the likelihood of continuation or recurrence of dumping and the magnitude of the margins of dumping likely to prevail if the Orders were revoked.8 The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Services System (ACCESS). ACCESS is available to registered users at https:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Reviews Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Orders would be likely to lead to the continuation or recurrence of dumping, and that the magnitude of the margins of dumping likely to prevail would be weighted- average margins of up to the following percentages: Country Weighted- average dumping margin (percent) India ...................................... 12.58 Italy ....................................... 204.53 Spain ..................................... 24.43 Administrative Protective Order (APO) This notice serves as the only reminder to parties subject to an APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely written notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act. Dated: August 23, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Orders IV. History of the Orders V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of Dumping 2. Magnitude of the Margin of Dumping Likely to Prevail VII. Final Results of Review VIII. Recommendation [FR Doc. 2022–18580 Filed 8–29–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–489–822] Welded Line Pipe From the Republic of Turkey: Preliminary Determination of No Shipments and Partial Rescission of the Antidumping Duty Administrative Review; 2020–2021 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily finds that Cimtas Boru Imalatlari ve Ticaret, Ltd. Sti (Cimtas), the only company subject to review, had no shipments of subject merchandise during the period of review (POR), December 1, 2020, through November 30, 2021. In addition, we are rescinding this administrative review with respect to companies for which requests for review were timely withdrawn. Interested parties are invited to comment on these preliminary results. DATES : Applicable August 30, 2022. FOR FURTHER INFORMATION CONTACT : Christopher Hargett, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4161. SUPPLEMENTARY INFORMATION : Background In December 2015, Commerce published in the Federal Register an antidumping duty order on welded line VerDate Sep<11>2014 17:24 Aug 29, 2022 Jkt 256001 PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 E:\FR\FM\30AUN1.SGM 30AUN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Final Results - CVD - India === 53722 Federal Register / Vol. 87, No. 169 / Thursday, September 1, 2022 / Notices 8 See Regulations to Improve Administration and Enforcement of Antidumping and Countervailing Duty Laws, 86 FR 52300 (September 20, 2021) (Final Rule). 9 See Scope Ruling Application; Annual Inquiry Service List; and Informational Sessions, 86 FR 53205 (September 27, 2021) (Procedural Guidance). 10 Id. 11 This segment has been combined with the ACCESS Segment Specific Information (SSI) field which will display the month in which the notice of the order or suspended investigation was published in the Federal Register, also known as the anniversary month. For example, for an order under case number A–000–000 that was published in the Federal Register in January, the relevant segment and SSI combination will appear in ACCESS as ‘‘AISL—January Anniversary.’’ Note that there will be only one annual inquiry service list segment per case number, and the anniversary month will be pre-populated in ACCESS. 12 See Procedural Guidance, 86 FR at 53206. 13 See Final Rule, 86 FR at 52335. 14 Id. and Enforcement of Antidumping and Countervailing Duty Laws’’ in the Federal Register. 8 On September 27, 2021, Commerce also published the notice entitled ‘‘Scope Ruling Application; Annual Inquiry Service List; and Informational Sessions’’ in the Federal Register. 9 The Final Rule and Procedural Guidance provide that Commerce will maintain an annual inquiry service list for each order or suspended investigation, and any interested party submitting a scope ruling application or request for circumvention inquiry shall serve a copy of the application or request on the persons on the annual inquiry service list for that order, as well as any companion order covering the same merchandise from the same country of origin.10 In accordance with the Procedural Guidance, for orders published in the Federal Register before November 4, 2021, Commerce created an annual inquiry service list segment for each order and suspended investigation. Interested parties who wished to be added to the annual inquiry service list for an order submitted an entry of appearance to the annual inquiry service list segment for the order in ACCESS, and on November 4, 2021, Commerce finalized the initial annual inquiry service lists for each order and suspended investigation. Each annual inquiry service list has been saved as a public service list in ACCESS, under each case number, and under a specific segment type called ‘‘AISL—Annual Inquiry Service List.’’ 11 As mentioned in the Procedural Guidance, beginning in January 2022, Commerce will update these annual inquiry service lists on an annual basis when the Opportunity Notice for the anniversary month of the order or suspended investigation is published in the Federal Register.12 Accordingly, Commerce will update the annual inquiry service lists for the above-listed antidumping and countervailing duty proceedings. All interested parties wishing to appear on the updated annual inquiry service list must take one of the two following actions: (1) New interested parties who did not previously submit an entry of appearance must submit a new entry of appearance at this time; (2) Interested parties who were included in the preceding annual inquiry service list must submit an amended entry of appearance to be included in the next year’s annual inquiry service list. For these interested parties, Commerce will change the entry of appearance status from ‘‘Active’’ to ‘‘Needs Amendment’’ for the annual inquiry service lists corresponding to the above-listed proceedings. This will allow those interested parties to make any necessary amendments and resubmit their entries of appearance. If no amendments need to be made, the interested party should indicate in the area on the ACCESS form requesting an explanation for the amendment that it is resubmitting its entry of appearance for inclusion in the annual inquiry service list for the following year. As mentioned in the Final Rule,13 once the petitioners and foreign governments have submitted an entry of appearance for the first time, they will automatically be added to the updated annual inquiry service list each year. Interested parties have 30 days after the date of this notice to submit new or amended entries of appearance. Commerce will then finalize the annual inquiry service lists five business days thereafter. For ease of administration, please note that Commerce requests that law firms with more than one attorney representing interested parties in a proceeding designate a lead attorney to be included on the annual inquiry service list. Commerce may update an annual inquiry service list at any time as needed based on interested parties’ amendments to their entries of appearance to remove or otherwise modify their list of members and representatives, or to update contact information. Any changes or announcements pertaining to these procedures will be posted to the ACCESS website at https:// access.trade.gov. Special Instructions for Petitioners and Foreign Governments In the Final Rule, Commerce stated that, ‘‘after an initial request and placement on the annual inquiry service list, both petitioners and foreign governments will automatically be placed on the annual inquiry service list in the years that follow.’’ 14 Accordingly, as stated above and pursuant to 19 CFR 351.225(n)(3), the petitioners and foreign governments will not need to resubmit their entries of appearance each year to continue to be included on the annual inquiry service list. However, the petitioners and foreign governments are responsible for making amendments to their entries of appearance during the annual update to the annual inquiry service list in accordance with the procedures described above. This notice is not required by statute but is published as a service to the international trading community. Dated: August 19, 2022. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2022–18920 Filed 8–31–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–533–872] Finished Carbon Steel Flanges From India: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of this expedited sunset review, the U.S. Department of Commerce (Commerce) finds that revocation of the countervailing duty order on finished carbon steel flanges from India would be likely to lead to continuation or recurrence of countervailable subsidies at the levels as indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable September 1, 2022. FOR FURTHER INFORMATION CONTACT : James R. Hepburn and Preston Cox, AD/ CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–1882 and (202) 482–5041, respectively. SUPPLEMENTARY INFORMATION : Background On August 24, 2017, Commerce published the countervailing duty order VerDate Sep<11>2014 17:15 Aug 31, 2022 Jkt 256001 PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 E:\FR\FM\01SEN1.SGM 01SEN1 jspears on DSK121TN23PROD with NOTICES 53723Federal Register / Vol. 87, No. 169 / Thursday, September 1, 2022 / Notices 1 See Finished Carbon Steel Flanges from India: Countervailing Duty Order, 82 FR 40138 (August 24, 2017) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 87 FR 25617 (May 2, 2021). 3 See Domestic Interested Parties’ Letter, ‘‘Finished Carbon Steel Flanges from India: Notice of Intent to Participate by Weldbend Corporation & Boltex Corporation,’’ dated May 17, 2022. 4 See Domestic Interested Parties’ Letter, ‘‘Finished Carbon Steel Flanges from India: Substantive Response of Domestic Interested Parties,’’ dated June 1, 2022 (Substantive Response). 5 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on May 2, 2022,’’ dated June 21, 2022. 6 See Memorandum, ‘‘Issues and Decision Memorandum for the Final Results of the Expedited First Sunset Review of the Countervailing Duty Order of Finished Carbon Steel Flanges from India,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 7 In the investigation and three subsequent reviews, Commerce found Norma (India) Ltd. to be cross-owned with USK Exports Private Limited; Uma Shanker Khandelwal & Co.; and Bansidhar Chirnajilal. See, e.g., Finished Carbon Steel Flanges from India: Final Affirmative Countervailing Duty Determination, 82 FR 29479 (June 29, 2017) at 29480; and Finished Carbon Steel Flanges from India: Final Results of Countervailing Duty Administrative Review; 2019, 86 FR 67909 (November 30, 2021) at 67910. on finished carbon steel flanges from India. 1 On May 2, 2022, Commerce published the notice of initiation of the first sunset review of the Order, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).2 Commerce received a notice of intent to participate from Weldbend Corporation and Boltex Manufacturing Company, Inc. (collectively, domestic interested parties) within the deadline specified in 19 CFR 351.218(d)(1)(i).3 The domestic interested parties claimed interested party status within the meaning of section 771(9)(C) of the Act and 19 CFR 351.102(b)(29)(v) as domestic producers of finished carbon steel flanges in the United States. On June 1, 2022, Commerce received an adequate substantive response from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).4 Commerce did not receive a substantive response from either the Government of India or a respondent interested party to this proceeding. On July 22, 2021, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties. 5 As a result, Commerce conducted an expedited (120-day) sunset review of the Order, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(B)(2) and (C)(2). Scope of the Order The products covered by the Order are finished carbon steel flanges. For a complete description of the scope of the Order, see the Issues and Decision Memorandum. 6 Analysis of Comments Received A complete discussion of all issues raised in this sunset review, including the likelihood of continuation or recurrence of subsidization in the event of revocation of the Order and the countervailable subsidy rates likely to prevail if the Order were to be revoked, is provided in the Issues and Decision Memorandum. A list of the topics discussed in it in the Issues and Decision Memorandum is attached as an appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Services System (ACCESS). ACCESS is available to registered users at http:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Order would be likely to lead to the continuation or recurrence of countervailable subsidies at the following rates: Producer/exporter Subsidy rate (percent ad valorem) Norma (India) Ltd 7 ............... 7.64 R.N. Gupta & Co., Ltd .......... 9.40 All Others .............................. 7.49 Administrative Protective Order This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing these final results and this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act, and 19 CFR 351.218. Dated: August 25, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Rates Likely to Prevail 3. Nature of the Subsidies VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2022–18917 Filed 8–31–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–489–842] Prestressed Concrete Steel Wire Strand From the Republic of Turkey: Preliminary Results of the Antidumping Duty Administrative Review; 2020–2022 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The U.S. Department of Commerce (Commerce) preliminarily determines that the sole producer/ exporter subject to this administrative review made sales of subject merchandise at less than fair value (LTFV) during the period of review (POR) September 30, 2020, through January 31, 2022. Interested parties are invited to comment on these preliminary results. DATES : Applicable September 1, 2022. FOR FURTHER INFORMATION CONTACT : Ajay Menon or Macey Mayes, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0208 or (202) 482–4473, respectively. SUPPLEMENTARY INFORMATION : Background On April 12, 2022, based on timely requests for review, in accordance with 19 CFR 351.221(c)(1)(i), we initiated an administrative review of the antidumping duty order on prestressed concrete steel wire strand (PC strand) VerDate Sep<11>2014 18:23 Aug 31, 2022 Jkt 256001 PO 00000 Frm 00014 Fmt 4703 Sfmt 4703 E:\FR\FM\01SEN1.SGM 01SEN1 jspears on DSK121TN23PROD with NOTICES