Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and United Kingdom; Inv. No. 701-TA-540-543 and 731-TA-1283-1287 and 1290 (Review)

=== Final Results - CVD - India === 54421Federal Register / Vol. 86, No. 188 / Friday, October 1, 2021 / Notices agency’s estimate of burden including the validity of the methodology and assumptions used; ways to enhance the quality, utility and clarity of the information to be collected; and ways to minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology. Comments regarding this information collection received by November 1, 2021 will be considered. Written comments and recommendations for the proposed information collection should be submitted within 30 days of the publication of this notice on the following website www.reginfo.gov/ public/do/PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function. An agency may not conduct or sponsor a collection of information unless the collection of information displays a currently valid OMB control number and the agency informs potential persons who are to respond to the collection of information that such persons are not required to respond to the collection of information unless it displays a currently valid OMB control number. Animal and Plant Health Inspection Service Title: Endangered Species Regulations and Forfeiture Procedures. OMB Control Number: 0579–0076. Summary of Collection: The Endangered Species Act of 1973 (16 U.S.C. 1513 et seq.) directs Federal departments to utilize their authorities under the Act to conserve endangered and threatened species. Section 3 of the Act specifies that the Secretary of Agriculture is authorized to promulgate such regulations as may be appropriate to enforce the Act. The regulations contained in 7 CFR 355 are intended to carry out the provisions of the Endangered Species Act. USDA’s Animal and Plant Health Inspection Service (APHIS), Plant Protection and Quarantine (PPQ) program is responsible for implementing these regulations. To enforce the regulations, APHIS will collect information using several forms and activities. Need and Use of the Information: APHIS will use the following information activities to conserve endangered and threatened species of terrestrial plants: Applications for protected plant permit form PPQ 621, appeals of denial of general permit, marking and notification requirements, notices of arrival form PPQ 368, notices of exportation, validation of documents, waivers of forfeiture procedures by owners of seized property form PPQ 623, claim form PPQ 625, requests for return of property, petitions for remission or mitigation of forfeiture, reports form PPQ 626, and reporting and recordkeeping. Without the collected information, APHIS would not be able to carry out its responsibilities under The Endangered Species Act, and the United States would not be able to fulfill its responsibilities as a signatory to the Convention on International Trade in Endangered Species (CITES) Treaty. The consequences of either would directly impact the protection of endangered plant species around the world. Description of Respondents: Business or other for-profit. Number of Respondents: 1,097. Frequency of Responses: Recordkeeping; Reporting: On occasion. Total Burden Hours: 15.433. Ruth Brown, Departmental Information Collection Clearance Officer. [FR Doc. 2021–21440 Filed 9–30–21; 8:45 am] BILLING CODE 3410–24–P COMMISSION ON CIVIL RIGHTS Notice of Public Meeting of the Connecticut Advisory Committee AGENCY : Commission on Civil Rights. ACTION : Announcement of meeting. SUMMARY : Notice is hereby given, pursuant to the provisions of the rules and regulations of the U.S. Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that the Connecticut Advisory Committee to the U.S. Commission on Civil Rights will hold a meeting via web conference or phone call on Monday, October 4, 2021, at 12:30 p.m. The purpose of the meeting is to review an advisory memorandum on voting rights. DATES : October 4, 2021, Monday, at 12:30 p.m. (ET): ADDRESSES : • To join by web conference, use WebEx link: https://bit.ly/39f0zA3; password, if needed: USCCR–CT. • To join by phone only, dial 1–800– 360–9505; Access code: 2761 412 5147. FOR FURTHER INFORMATION CONTACT : Barbara Delaviez at ero@usccr.gov or by phone at 202–539–8246. SUPPLEMENTARY INFORMATION : This meeting is available to the public through the WebEx link above. If joining only via phone, callers can expect to incur charges for calls they initiate over wireless lines, and the Commission will not refund any incurred charges. Individuals who are deaf, deafblind and hard of hearing. may also follow the proceedings by first calling the Federal Relay Service at 1–800–877–8339 and providing the Service with the call-in number found through registering at the web link provided for this meeting. Members of the public are entitled to make comments during the open period at the end of the meeting. Members of the public may also submit written comments; the comments must be received in the Regional Programs Unit within 30 days following the meeting. Written comments may be emailed to Barbara de La Viez at ero@usccr.gov. Persons who desire additional information may contact the Regional Programs Unit at (202) 539–8246. Records and documents discussed during the meeting will be available for public viewing as they become available at www.facadatabase.gov. Persons interested in the work of this advisory committee are advised to go to the Commission’s website, www.usccr.gov, or to contact the Regional Programs Unit at the above phone number or email address. Agenda: Monday, October 4, 2021, at 12:30 p.m. (ET) I. Welcome and Roll Call II. Review and Vote on Advisory Memo on Voting Rights III. Public Comment IV. Next Steps V. Adjournment Dated: September 27, 2021. David Mussatt, Supervisory Chief, Regional Programs Unit. [FR Doc. 2021–21360 Filed 9–30–21; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE International Trade Administration [C–533–866] Cold-Rolled Steel Flat Products From India: Final Results of the Expedited Five-Year Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of this sunset review, the Department of Commerce (Commerce) finds that revoking the countervailing duty (CVD) order on cold-rolled steel flat products (cold- rolled steel) from India would likely VerDate Sep<11>2014 18:04 Sep 30, 2021 Jkt 256001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\01OCN1.SGM 01OCN1 54422 Federal Register / Vol. 86, No. 188 / Friday, October 1, 2021 / Notices 1 See Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (Order). 2 See Initiation of Five-Year (‘‘Sunset’’) Review, 86 FR 29239 (June 1, 2021). 3 See Cleveland-Cliffs’ Letter, ‘‘Five-Year (‘‘Sunset’’) Review Of Countervailing Duty Order On Cold-Rolled Steel Flat Products from India: Notice Of Intent To Participate In Sunset Review,’’ dated June 14, 2021; U.S. Steel’s Letter ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping and Countervailing Duty Orders on Cold-Rolled Steel Flat Products from India: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel’s Letter ‘‘Notice of Intent to Participate in the First Five-Year Review of the Countervailing Duty Order on Cold-Rolled Steel Flat Products from India,’’ dated June 16, 2021; and Nucor’s Letter ‘‘Certain Cold-Rolled Steel Flat Products from India: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021. 4 See Domestic Interested Parties’ Letter, ‘‘First Five-Year (‘‘Sunset’’) Review of Countervailing Duty Order on Cold-Rolled Steel Flat Products from India: Domestic Industry’s Substantive Response to Notice of Initiation,’’ dated July 1, 2021 (Domestic Interested Parties’ Substantive Response). 5 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on June 1, 2021,’’ dated June 1, 2021. 6 For a full description of the scope of the order, see Memorandum, ‘‘Issues and Decision Memorandum for the Expedited First Sunset Review of the Countervailing Duty Order on Cold- Rolled Steel Flat Products from India,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). lead to continuation or recurrence of countervailable subsidies at the levels indicated in the ‘‘Final Results of Review’’ section of this notice. DATES : Applicable October 1, 2021. FOR FURTHER INFORMATION CONTACT : Thomas Hanna, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0835. SUPPLEMENTARY INFORMATION : Background On September 20, 2016, Commerce published in the Federal Register the Order.1 On June 1, 2021, the Department of Commerce (Commerce) published the notice of initiation of the sunset reviews of the Order, pursuant to section 751(c) of the Act. 2 On June 14 and 16, 2021, Commerce received a notice of intent to participate from Cleveland-Cliffs Inc. (Cleveland-Cliffs), United States Steel Corporation (U.S. Steel), California Steel Industries (California Steel), Steel Dynamics Inc. (Steel Dynamics), and Nucor Corporation (Nucor), within the deadline specified in 19 CFR 351.218(d)(1)(i). 3 Cleveland-Cliffs, U.S. Steel, California Steel, Steel Dynamics, and Nucor claimed interested party status under section 771(9)(C) of the Act, as domestic producers of cold- rolled steel flat products in the United States. Commerce received a substantive response from Cleveland-Cliffs, U.S. Steel, California Steel, Steel Dynamics, and Nucor (collectively, domestic interested parties) within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). 4 We received no substantive response from any other domestic or respondent interested parties in this proceeding and no hearing was requested. On July 22, 2021, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties.5 As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of this CVD Order. Scope of the Order The products covered by this order are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. Imports of the subject merchandise are provided for under Harmonized Tariff Schedule of the United States (HTSUS) categories: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the Order is dispositive.6 Analysis of Comments Received All issues raised in this sunset review are addressed in the Issues and Decision Memorandum, which is hereby adopted by this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov. A list of topics discussed in the Issues and Decision Memorandum is included as an appendix to this notice. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/ frn. Final Results of Sunset Review Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Order would be likely to lead to continuation or recurrence of countervailable subsidies at the following rates: Producer/exporter Net countervailable subsidy (percent) JSW Steel Limited and JSW Steel Coated Products Limited .............................. 10.00 All Others .............................. 10.00 Administrative Protective Order (APO) This notice also serves as the only reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing the final results and this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act, and 19 CFR 351.218. VerDate Sep<11>2014 18:04 Sep 30, 2021 Jkt 256001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\01OCN1.SGM 01OCN1 54423Federal Register / Vol. 86, No. 188 / Friday, October 1, 2021 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19, 85 FR 41363 (July 10, 2020). Dated: September 29, 2021. Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. History of the Order IV. Scope of the Order V. Legal Framework VI. Discussion of the Issues VII. Final Results of Sunset Review VIII. Recommendation [FR Doc. 2021–21443 Filed 9–30–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : In accordance with the Tariff Act of 1930, as amended (the Act), the Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping and countervailing duty (AD/CVD) order(s) and suspended investigation(s) listed below. The International Trade Commission (the ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable October 1, 2021. FOR FURTHER INFORMATION CONTACT : Commerce official identified in the Initiation of Review section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Act and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following antidumping and countervailing duty order(s) and suspended investigation(s): DOC case No. ITC case No. Country Product Commerce contact A–533–867 ......... 731–TA–1298 India ................... Welded Stainless Pressure Pipe (1st Review) .... Mary Kolberg (202) 482–1785. A–570–898 ......... 731–TA–1082 China ................. Chlorinated Isocyanurates (3rd Review) .............. Jacky Arrowsmith (202) 482–5255. A–469–814 ......... 731–TA–1083 Spain .................. Chlorinated Isocyanurates (3rd Review) .............. Jacky Arrowsmith (202) 482–5255. C–533–868 ......... 701–TA–548 India ................... Welded Stainless Pressure Pipe (1st Review) .... Mary Kolberg (202) 482–1785. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https:// enforcement.trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in section 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce VerDate Sep<11>2014 18:04 Sep 30, 2021 Jkt 256001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\01OCN1.SGM 01OCN1 ──────────────────────────────────────────────────────────── === USITC Scheduling === 70864 Federal Register / Vol. 86, No. 236 / Monday, December 13, 2021 / Notices specifically: (1) A limited exclusion order directed to certain filament light- emitting diodes and products containing same imported, sold for importation, and/or sold after importation by respondents and intervenors: IKEA Supply AG; IKEA U.S. Retail LLC; IKEA of Sweden AB (collectively, ‘‘IKEA’’); General Electric Company; Savant Technologies LLC; Home Depot Product Authority, LLC; Home Depot U.S.A., Inc.; The Home Depot, Inc.; Feit Electric Company, Inc.; Satco Products, Inc.; Signify North America Corp.; and Global Value Lighting LLC (collectively, ‘‘Respondents’’); and (2) cease and desist orders directed against all Respondents, except IKEA. Parties are to file public interest submissions pursuant to 19 CFR 210.50(a)(4). The Commission is interested in further development of the record on the public interest in this investigation. Accordingly, members of the public are invited to file submissions of no more than five (5) pages, inclusive of attachments, concerning the public interest in light of the ALJ’s Recommended Determination on Remedy and Bonding issued in this investigation on November 19, 2021. Comments should address whether issuance of the recommended remedial orders in this investigation, should the Commission find a violation, would affect the public health and welfare in the United States, competitive conditions in the United States economy, the production of like or directly competitive articles in the United States, or United States consumers. In particular, the Commission is interested in comments that: (i) Explain how the articles potentially subject to the recommended remedial orders are used in the United States; (ii) identify any public health, safety, or welfare concerns in the United States relating to the recommended orders; (iii) identify like or directly competitive articles that complainants, complainants’ licensees, or third parties make in the United States which could replace the subject articles if they were to be excluded; (iv) indicate whether complainants, complainants’ licensees, and/or third- party suppliers have the capacity to replace the volume of articles potentially subject to the recommended orders within a commercially reasonable time; and (v) explain how the recommended orders would impact consumers in the United States. Written submissions must be filed no later than by close of business on December 22, 2021. Persons filing written submissions must file the original document electronically on or before the deadlines stated above. The Commission’s paper filing requirements in 19 CFR 210.4(f) are currently waived. 85 FR 15798 (March 19, 2020). Submissions should refer to the investigation number (‘‘Inv. No. 337–TA–1220’’) in a prominent place on the cover page and/or the first page. (See Handbook for Electronic Filing Procedures, https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf.). Persons with questions regarding filing should contact the Secretary (202–205–2000). Any person desiring to submit a document to the Commission in confidence must request confidential treatment by marking each document with a header indicating that the document contains confidential information. This marking will be deemed to satisfy the request procedure set forth in Rules 201.6(b) and 210.5(e)(2) (19 CFR 201.6(b) & 210.5(e)(2)). Documents for which confidential treatment by the Commission is properly sought will be treated accordingly. A redacted non- confidential version of the document must also be filed simultaneously with any confidential filing. All information, including confidential business information and documents for which confidential treatment is properly sought, submitted to the Commission for purposes of this investigation may be disclosed to and used: (i) By the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. All nonconfidential written submissions will be available for public inspection on EDIS. This action is taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in Part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: December 8, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–26942 Filed 12–10–21; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–540–543 and 731–TA–1283–1287 and 1290 (Review)] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, Korea, and the United Kingdom; Scheduling of Full Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice of the scheduling of full reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’) to determine whether revocation of the countervailing duty orders on cold-rolled steel flat products from Brazil, China, India, and Korea and the antidumping duty orders on cold-rolled steel flat products from Brazil, China, India, Japan, Korea, and the United Kingdom would be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time. The Commission has determined to exercise its authority to extend the review period by up to 90 days. DATES : December 6, 2021. FOR FURTHER INFORMATION CONTACT : Calvin Chang ((202) 205–3062), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these reviews may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On September 7, 2021, the Commission determined that responses to its notice of institution of the subject five-year reviews were such that full reviews should proceed (86 FR 52180, September 20, 2021); accordingly, full reviews are being scheduled pursuant to section 751(c)(5) of the Tariff Act of 1930 (19 U.S.C. VerDate Sep<11>2014 16:50 Dec 10, 2021 Jkt 256001 PO 00000 Frm 00051 Fmt 4703 Sfmt 4703 E:\FR\FM\13DEN1.SGM 13DEN1 khammond on DSKJM1Z7X2PROD with NOTICES 70865Federal Register / Vol. 86, No. 236 / Monday, December 13, 2021 / Notices 1675(c)(5)). A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements are available from the Office of the Secretary and at the Commission’s website. Participation in the reviews and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in these reviews as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission’s rules, by 45 days after publication of this notice. A party that filed a notice of appearance following publication of the Commission’s notice of institution of the reviews need not file an additional notice of appearance. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the reviews. For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). Please note the Secretary’s Office will accept only electronic filings during this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov.) No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission’s rules, the Secretary will make BPI gathered in these reviews available to authorized applicants under the APO issued in the reviews, provided that the application is made by 45 days after publication of this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the reviews. A party granted access to BPI following publication of the Commission’s notice of institution of the reviews need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Staff report.—The prehearing staff report in the reviews will be placed in the nonpublic record on May 2, 2022, and a public version will be issued thereafter, pursuant to section 207.64 of the Commission’s rules. Hearing.—The Commission will hold a hearing in connection with these reviews beginning at 9:30 a.m. on May 24, 2022. Information about the place and form of the hearing, including about how to participate in and/or view the hearing, will be posted on the Commission’s website at https:// www.usitc.gov/calendarpad/ calendar.html. Interested parties should check the Commission’s website periodically for updates. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before May 13, 2022. A nonparty who has testimony that may aid the Commission’s deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference to be held at 9:30 a.m. on May 23, 2022. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission’s rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing. Written submissions.—Each party to the reviews may submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.65 of the Commission’s rules; the deadline for filing is May 12, 2022. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission’s rules, and posthearing briefs, which must conform with the provisions of section 207.67 of the Commission’s rules. The deadline for filing posthearing briefs is June 6, 2022. In addition, any person who has not entered an appearance as a party to the reviews may submit a written statement of information pertinent to the subject of the reviews on or before June 6, 2022. On July 6, 2022, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before July 11, 2022, but such final comments must not contain new factual information and must otherwise comply with section 207.68 of the Commission’s rules. All written submissions must conform with the provisions of section 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission’s rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff. In accordance with sections 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the reviews must be served on all other parties to the reviews (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service. The Commission has determined that these reviews are extraordinarily complicated and therefore has determined to exercise its authority to extend the review period by up to 90 days pursuant to 19 U.S.C. 1675(c)(5)(B). Authority: These reviews are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.62 of the Commission’s rules. By order of the Commission. Issued: December 7, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–26870 Filed 12–10–21; 8:45 am] BILLING CODE 7020–02–P JUDICIAL CONFERENCE OF THE UNITED STATES Advisory Committee on Civil Rules; Meeting of the Judicial Conference AGENCY : Judicial Conference of the United States. ACTION : Advisory Committee on Civil Rules; Notice of cancellation of open hearing. SUMMARY : The following virtual public hearing on proposed amendments to the Federal Rules of Civil Procedure has been canceled: Civil Rules Hearing on January 6, 2022. The announcement for this hearing was previously published in the Federal Register on August 11, 2021. VerDate Sep<11>2014 16:50 Dec 10, 2021 Jkt 256001 PO 00000 Frm 00052 Fmt 4703 Sfmt 4703 E:\FR\FM\13DEN1.SGM 13DEN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === USITC Institution === 29286 Federal Register / Vol. 86, No. 103 / Tuesday, June 1, 2021 / Notices production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in each Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. Issued: May 24, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–11261 Filed 5–28–21; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–540–543 and 731–TA–1283–1287 and 1290 (Review)] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, Korea, and the United Kingdom; Institution of Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing duty orders on imports of cold-rolled steel flat products from Brazil, China, India, and Korea and the revocation of the antidumping duty orders on imports of cold-rolled steel flat products from Brazil, China, India, Japan, Korea, and the United Kingdom would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES : Instituted June 1, 2021. To be assured of consideration, the deadline for responses is July 1, 2021. Comments on the adequacy of responses may be filed with the Commission by August 13, 2021. FOR FURTHER INFORMATION CONTACT : Lawrence Jones (202–205–3358), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing- impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION : Background.—On July 14, 2016, the Department of Commerce (‘‘Commerce’’) issued antidumping duty orders on imports of cold-rolled steel flat products from Japan and China (81 FR 45955), and a countervailing duty order on imports from China (81 FR 45690). On September 20, 2016, Commerce issued antidumping duty orders on imports of cold-rolled steel flat products from Brazil, India, Korea, and the United Kingdom (81 FR 64432). Additionally, on September 20, 2016, Commerce issued countervailing duty orders on imports of cold-rolled steel flat products from Brazil, India, and Korea (81 FR 64436). The Commission is conducting reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determination in any expedited review will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to this review: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year review, as defined by the Department of Commerce. (2) The Subject Countries in these reviews are Brazil, China, India, Japan, Korea, and the United Kingdom. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, the Commission defined the Domestic Like Product as consisting of cold-rolled steel that was coextensive with Commerce’s scope. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, the Commission defined the Domestic Industry as all U.S. producers of cold- rolled steel. (5) The Order Date is the date that the countervailing duty orders under review became effective. In these reviews, the Orders Date is July 14, 2016. (6) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter VerDate Sep<11>2014 18:20 May 28, 2021 Jkt 253001 PO 00000 Frm 00054 Fmt 4703 Sfmt 4703 E:\FR\FM\01JNN1.SGM 01JNN1 jbell on DSKJLSW7X2PROD with NOTICES 29287Federal Register / Vol. 86, No. 103 / Tuesday, June 1, 2021 / Notices as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) By the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is July 1, 2021. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct an expedited or full review. The deadline for filing such comments is August 13, 2021. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paper- based filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 21–5–488, expiration date June 30, 2023. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determination in the reviews. Information To Be Provided in Response to This Notice of Institution: If you are a domestic producer, union/ worker group, or trade/business association; import/export Subject Merchandise from more than one Subject Country; or produce Subject Merchandise in more than one Subject Country, you may file a single response. If you do so, please ensure that your response to each question includes the information requested for each pertinent Subject Country. As used below, the term ‘‘firm’’ includes any related firms. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the countervailing antidumping duty orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in § 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in VerDate Sep<11>2014 19:17 May 28, 2021 Jkt 253001 PO 00000 Frm 00055 Fmt 4703 Sfmt 4703 E:\FR\FM\01JNN1.SGM 01JNN1 jbell on DSKJLSW7X2PROD with NOTICES 29288 Federal Register / Vol. 86, No. 103 / Tuesday, June 1, 2021 / Notices § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in each Subject Country that currently export or have exported Subject Merchandise to the United States or other countries since the Order Date. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and Email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2020, except as noted (report quantity data in short tons and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2020 (report quantity data in short tons and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping or countervailing duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. commercial shipments of Subject Merchandise imported from each Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping and/or countervailing duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from each Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2020 (report quantity data in short tons and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in each Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in each Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in each Subject Country since the Order Date, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in each Subject Country, and such merchandise from other countries. (13) (OPTIONAL) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of Title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. Issued: May 24, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–11267 Filed 5–28–21; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–473 and 731– TA–1173 (Second Review)] Potassium Phosphate Salts From China; Scheduling of Expedited Five- Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. VerDate Sep<11>2014 18:20 May 28, 2021 Jkt 253001 PO 00000 Frm 00056 Fmt 4703 Sfmt 4703 E:\FR\FM\01JNN1.SGM 01JNN1 jbell on DSKJLSW7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === USITC Full Review === 52180 Federal Register / Vol. 86, No. 179 / Monday, September 20, 2021 / Notices 210.5(e)(2) (19 CFR 201.6(b) & 210.5(e)(2)). Documents for which confidential treatment by the Commission is properly sought will be treated accordingly. A redacted non- confidential version of the document must also be filed simultaneously with any confidential filing. All information, including confidential business information and documents for which confidential treatment is properly sought, submitted to the Commission for purposes of this investigation may be disclosed to and used: (i) By the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. All nonconfidential written submissions will be available for public inspection on EDIS. This action is taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in Part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: September 15, 2021. Katherine Hiner, Supervisory Attorney. [FR Doc. 2021–20286 Filed 9–17–21; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–540–543 and 731–TA–1283–1287 and 1290 (Review)] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, Korea, and the United Kingdom; Notice of Commission Determination To Conduct Full Five-Year Reviews AGENCY : United States International Trade Commission. ACTION : Notice. SUMMARY : The Commission hereby gives notice that it will proceed with full reviews pursuant to the Tariff Act of 1930 to determine whether revocation of the countervailing duty orders on cold- rolled steel flat products from Brazil, China, India, and Korea and the antidumping duty orders on cold-rolled steel flat products from Brazil, China, India, Japan, Korea, and the United Kingdom would be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time. A schedule for the reviews will be established and announced at a later date. DATES : September 7, 2021. FOR FURTHER INFORMATION CONTACT : Caitlyn Hendricks (202–205–2058), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for these reviews may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. For further information concerning the conduct of these reviews and rules of general application, consult the Commission’s Rules of Practice and Procedure, part 201, subparts A through E (19 CFR part 201), and part 207, subparts A, D, E, and F (19 CFR part 207). SUPPLEMENTARY INFORMATION : On September 7, 2021, the Commission determined that it should proceed to full reviews in the subject five-year reviews pursuant to section 751(c) of the Tariff Act of 1930 (19 U.S.C. 1675(c)). The Commission found that the domestic interested party group response and the respondent interested party group responses from Brazil, Japan, and the United Kingdom to its notice of institution (86 FR 29286, June 1, 2021) were adequate and that the respondent interested party group responses from China, India, and Korea were inadequate. However, the Commission determined to conduct full reviews concerning the orders on cold- rolled steel flat products from China, India, and Korea to promote administrative efficiency considering its determinations to conduct full reviews of the orders with respect to Brazil, Japan, and the United Kingdom. A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s website. Authority: These reviews are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.62 of the Commission’s rules. By order of the Commission. Issued: September 14, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–20224 Filed 9–17–21; 8:45 am] BILLING CODE 7020–02–P DEPARTMENT OF JUSTICE Bureau of Alcohol, Tobacco, Firearms and Explosives [OMB Number 1140–0003] Agency Information Collection Activities; Proposed eCollection of eComments Requested; Revision of a Currently Approved Collection; Report of Multiple Sale or Other Disposition of Pistols and Revolvers—ATF Form 3310.4 AGENCY : Bureau of Alcohol, Tobacco, Firearms and Explosives, Department of Justice. ACTION : 30-Day notice. SUMMARY : The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), Department of Justice (DOJ) will submit the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995. DATES : Comments are encouraged and will be accepted for an additional 30 days until October 20, 2021. ADDRESSES : Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to www.reginfo.gov/public/do/ PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function. SUPPLEMENTARY INFORMATION : Written comments and suggestions from the public and affected agencies concerning the proposed collection of information are encouraged. Your comments should address one or more of the following four points: Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; VerDate Sep<11>2014 16:49 Sep 17, 2021 Jkt 253001 PO 00000 Frm 00058 Fmt 4703 Sfmt 4703 E:\FR\FM\20SEN1.SGM 20SEN1 ──────────────────────────────────────────────────────────── === USITC Determination === 49886 Federal Register / Vol. 87, No. 155 / Friday, August 12, 2022 / Notices 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 1 The record is defined in § 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 2 Commissioners Rhonda K. Schmidtlein and Randolph J. Stayin determine that revocation of the countervailing duty orders on CRS from Brazil, China, India, and South Korea and the antidumping duty orders on CRS from Brazil, China, India, Japan, South Korea, and the United Kingdom would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 1, 5, 6, and 12 of the ’896 patent. On July 25, 2022, Sonos filed an opposition to Google’s modification petition. The Commission has determined that Google’s petition complies with the requirements for institution of a modification proceeding pursuant to Commission Rule 210.76. Accordingly, the Commission has determined to institute a modification proceeding and has delegated the proceeding to the CALJ. The presiding CALJ shall submit a recommended determination within six (6) months after publication of notice of this Order in the Federal Register. Sonos, Google, and OUII are named as parties to the modification proceeding. The Commission vote for this determination took place on August 8, 2022. The authority for the Commission’s determination is contained in section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in Part 210 of the Commission’s Rules of Practice and Procedure (19 CFR part 210). By order of the Commission. Issued: August 9, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–17398 Filed 8–11–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731–TA–825–826 (Fourth Review)] Certain Polyester Staple Fiber From South Korea and Taiwan Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the antidumping duty orders on certain polyester staple fiber from South Korea and Taiwan would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. Background The Commission instituted these reviews on January 3, 2022 (87 FR 119) and determined on April 8, 2022, that it would conduct expedited reviews (87 FR 38780, June 29, 2022). The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on August 8, 2022. The views of the Commission are contained in USITC Publication 5341 (August 2022), entitled Certain Polyester Staple Fiber from South Korea and Taiwan: Investigation Nos. 731–TA–825–826 (Fourth Review). By order of the Commission. Issued: August 8, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–17313 Filed 8–11–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–540–543 and 731–TA–1283–1287 and 1290 (Review)] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, South Korea, and the United Kingdom Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (‘‘Commission’’) determines, pursuant to the Tariff Act of 1930 (‘‘the Act’’), that revocation of the countervailing duty orders on cold- rolled steel flat products (‘‘cold-rolled steel’’) from China, India, and South Korea and the antidumping duty orders on cold-rolled steel from China, India, Japan, South Korea, and the United Kingdom would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. The Commission further determines that revocation of the countervailing and antidumping duty orders on cold-rolled steel from Brazil would not be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 2 Background The Commission instituted these reviews on June 1, 2021 (86 FR 29286) and determined on September 7, 2021 that it would conduct full reviews (86 FR 52180, September 20, 2021). Notice of the scheduling of the Commission’s reviews and of a public hearing to be held in connection therewith was given by posting copies of the notice in the Office of the Secretary, U.S. International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register on December 13, 2021 (86 FR 70864). The Commission conducted its hearing on May 24, 2022. All persons who requested the opportunity were permitted to participate. The Commission made these determinations pursuant to section 751(c) of the Act (19 U.S.C. 1675(c)). It completed and filed its determinations in these reviews on August 9, 2022. The views of the Commission are contained in USITC Publication 5339 (August 2022), entitled Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and the United Kingdom: Investigation Nos. 701–TA– 540–543 and 731–TA–1283–1287 and 1290 (Review). By order of the Commission. Issued: August 9, 2022. Katherine Hiner, Acting Secretary to the Commission. [FR Doc. 2022–17399 Filed 8–11–22; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest AGENCY : U.S. International Trade Commission. ACTION : Notice. SUMMARY : Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Pillows and Seat Cushions, Components Thereof, and Packaging Thereof, DN 3633; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant’s filing pursuant to the Commission’s Rules of Practice and Procedure. FOR FURTHER INFORMATION CONTACT : Katherine M. Hiner, Acting Secretary to the Commission, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436, telephone (202) 205–2000. The public version of the VerDate Sep<11>2014 17:38 Aug 11, 2022 Jkt 256001 PO 00000 Frm 00088 Fmt 4703 Sfmt 4703 E:\FR\FM\12AUN1.SGM 12AUN1 jspears on DSK121TN23PROD with NOTICES ──────────────────────────────────────────────────────────── === Continuation - CVD - China - South Korea === 51056 Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices 1 See Notice of Amended Final Determination of Sales at Less Than Fair Value: Certain Polyester Staple Fiber from the Republic of Korea and Antidumping Duty Orders: Certain Polyester Staple Fiber from the Republic of Korea and Taiwan, 65 FR 33807 (May 25, 2000) (Orders); see also Certain Polyester Staple Fiber from Korea: Notice of Amended Final Determination and Amended Order Pursuant to Final Court Decision, 68 FR 74552 (December 24, 2003). 2 See Initiation Notice of Five-Year (Sunset) Reviews, 87 FR 76 (January 3, 2022); see also Polyester Staple Fiber from Korea and Taiwan; Institution of Five-Year Reviews, 87 FR 119 (January 3, 2022). 3 See Polyester Staple Fiber the Republic of Korea, and Taiwan: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 87 FR 27567 (May 9, 2022), and accompanying Issues and Decision Memorandum. 4 See Certain Polyester Staple Fiber from South Korea and Taiwan, 87 FR 49886 (August 12, 2022); see also Certain Polyester Staple Fiber from South Korea and Taiwan, Investigation Nos. 731–TA–825– 826 (Fourth Review), USITC Pub. 5341 (August 2022). 1 See Certain Cold-Rolled Steel Flat Products from the People’s Republic of China: Countervailing Duty Order, 81FR 45960 (July 14, 2016) (CRS China Order); and Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing DutyOrder (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (CRS Korea Order) (collectively, the Orders). 2 See Initiation of Five-Year (Sunset) Reviews, 86 FR 29239 (June 1, 2021). and Taiwan. 1 On January 3, 2022, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act), Commerce published the initiation of the fourth sunset reviews of the Orders and the ITC instituted its review of the Orders.2 As a result of its reviews, Commerce determined, pursuant to sections 751(c)(1) and 752(c) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of dumping. Commerce, therefore, notified the ITC of the magnitude of the margins of dumping rates likely to prevail should these Orders be revoked. 3 On August 12, 2022, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to the continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. 4 Scope of the Orders The product covered by the Orders is certain polyester staple fiber (PSF). PSF is defined as synthetic staple fibers, not carded, combed or otherwise processed for spinning, of polyesters measuring 3.3 decitex (3 denier, inclusive) or more in diameter. This merchandise is cut to lengths varying from one inch (25 mm) to five inches (127 mm). The merchandise subject to these Orders may be coated, usually with a silicon or other finish, or not coated. PSF is generally used as stuffing in sleeping bags, mattresses, ski jackets, comforters, cushions, pillows, and furniture. Merchandise of less than 3.3 decitex (less than 3 denier) currently classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 5503.20.00.25 is specifically excluded from these Orders. Also specifically excluded from these Orders are polyester staple fibers of 10 to 18 denier that are cut to lengths of 6 to 8 inches (fibers used in the manufacture of carpeting). In addition, low-melt PSF is excluded from these Orders. Low- melt PSF is defined as a bi-component polyester fiber having a polyester fiber component that melts at a lower temperature than the other polyester fiber component. The merchandise subject to these Orders is currently classifiable in the HTSUS at subheadings 5503.20.00.45 and 5503.20.00.65. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise under the Orders is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the Orders. The U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Orders will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year (sunset) reviews of the Orders not later than 30 days prior to the fifth anniversary of the effective date of continuation. Administrative Protective Order (APO) This notice also serves as the only reminder to parties subject to an APO of their responsibility concerning the return, destruction, or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO which may be subject to sanctions. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: August 15, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–17920 Filed 8–18–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–030; C–580–882] Certain Cold-Rolled Steel Flat Products From the People’s Republic of China and the Republic of Korea: Continuation of Countervailing Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the countervailing duty (CVD) orders on certain cold-rolled steel flat products (cold-rolled steel or CRS) from the People’s Republic of China (China) and the Republic of Korea (Korea) would likely lead to continuation or recurrence of net countervailable subsidies and material injury to an industry in the United States, Commerce is publishing a notice of continuation of the CVD orders. DATES : Applicable August 19, 2022. FOR FURTHER INFORMATION CONTACT : Tyler Weinhold or Harrison Tanchuck, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–1221 or (202) 482–7421, respectively. SUPPLEMENTARY INFORMATION : Background On July 14 and September 20, 2016, Commerce published in the Federal Register the CVD orders on cold-rolled steel from China and Korea, respectively. 1 On June 1, 2021, Commerce published a notice of initiation of the first sunset review of the Orders, pursuant to section 751(c)(2) of the Tariff Act of 1930, as amended (the Act).2 Commerce conducted expedited (120-day) sunset reviews of the Orders, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2). As a result of these reviews, pursuant to sections 751(c)(1) and 752(c) of the VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 lotter on DSK11XQN23PROD with NOTICES1 51057Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices 3 See Certain Cold-Rolled Steel Flat Products from the People’s Republic of China and the Republic of Korea: Final Results of the Expedited First Sunset Review of the Countervailing Duty Orders, 86 FR 54677 (September 28, 2021), and accompanying Issues and Decision Memorandum (IDM). 4 See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and the United Kingdom, 87 FR 49886 (August 12, 2022). 5 See CRS China Order; see also Memorandum, ‘‘Certain Cold-Rolled Steel Flat Products from the People’s Republic of China (C–570–030): Request from Customs and Border Protection to Update the ACE AD/CVD Case Reference File,’’ dated September 13, 2021; and Certain Cold-Rolled Steel Flat Products from the People’s Republic of China: Affirmative Final Determination of Circumvention of the Antidumping Duty and Countervailing Duty Orders, 83 FR 23891 (May 23, 2018), and accompanying IDM. 6 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 7 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) more than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 8 Silico-manganese steel is defined as steels containing by weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 9 See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014). This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ Act, Commerce determined that revocation of the Orders on cold-rolled steel from China and Korea would likely lead to continuation or recurrence of countervailable subsidies. Commerce, therefore, notified the ITC of the magnitude of the net countervailable subsidy rates likely to prevail should the Orders be revoked.3 On August 12, 2022, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.4 Scope of the Orders CRS From China 5 The products covered by this Order are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross- section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) Where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this Order are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of this Order if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this Order unless specifically excluded. The following products are outside of and/ or specifically excluded from the scope of this Order: • Ball bearing steels; 6 • Tool steels; 7 • Silico-manganese steel; 8 • Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel from Germany, Japan, and Poland. 9 • Non-Oriented Electrical Steels (NOES), as defined in the antidumping VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 lotter on DSK11XQN23PROD with NOTICES1 51058 Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices 10 See Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741–42 (December 3, 2014) (NOES from Germany, Japan, and Poland Order). The orders define NOES as ‘‘cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ 11 See CRS Korea Order; see also Memorandum ‘‘Certain Cold-Rolled Steel Flat Products from the Republic of Korea (C–580–882): Request from Customs and Border Protection to Update the ACE AD/CVD Case Reference File,’’ dated September 13, 2021; and Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Final Results of Countervailing Duty Administrative Review; 2018, 86 FR 40465 (July 28, 2021) (CRS Korea 2018 Final Results), and accompanying IDM. orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.10 The products subject to this Order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0040, 7209.16.0045, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0040, 7209.17.0045, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to this Order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of this Order is dispositive. CRS From Korea 11 The products covered by this Order are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross- section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this Order are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of this Order if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this Order unless specifically excluded. The following products are outside of and/ or specifically excluded from the scope of this Order: VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 lotter on DSK11XQN23PROD with NOTICES1 51059Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices 12 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 13 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) more than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 14 Silico-manganese steel is defined as steels containing by weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 15 See NOES from Germany, Japan, and Poland Order. This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ 16 See NOES from Germany, Japan, and Poland Order. The orders define NOES as ‘‘cold-rolled, flat- rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ • Ball bearing steels; 12 • Tool steels; 13 • Silico-manganese steel; 14 • Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel from Germany, Japan, and Poland. 15 • Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.16 The products subject to this Order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0040, 7209.16.0045, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0040, 7209.17.0045, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to this Order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of this Order is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of countervailable subsidies as well as material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of continuation of the Orders will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.281(c)(2), Commerce intends to initiate the next five-year (sunset) review of the Orders no later than 30 days prior to the fifth anniversary of the effective date of continuation. Administrative Protective Order This notice also serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return, destruction, or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO which may be subject to sanctions. Notification to Interested Parties This five-year sunset review and this notice are in accordance with section 751(c) and (d)(2) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: August 15, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–17919 Filed 8–18–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648–XC283] New England Fishery Management Council; Public Meeting AGENCY : National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION : Notice of a public meeting. SUMMARY : The New England Fishery Management Council (Council) is scheduling a public meeting of its Ecosystem-Based Fishery Management Committee via webinar to consider actions affecting New England fisheries in the exclusive economic zone (EEZ). Recommendations from this group will be brought to the full Council for formal consideration and action, if appropriate. DATES : This webinar will be held on Wednesday, September 7, 2022, at 9:30 a.m. Webinar registration URL information: https://attendee. gotowebinar.com/register/ 8496704127565208587. ADDRESSES : Council address: New England Fishery Management Council, 50 Water Street, Mill 2, Newburyport, MA 01950. VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Revocation - AD/CVD - Brazil === 52360 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 1 See Certain Cold-Rolled Steel Flat Products from Japan and the People’s Republic of China: Antidumping Duty Orders, 81 FR 45956 (July 14, 2016) (China and Japan AD Orders); see also Certain Cold-Rolled Steel Flat Products from Brazil, or with other components, are covered by the scope of the AD and CVD orders on stainless steel sheet and strip (SSSS) from China because they meet all physical specifications of subject merchandise and do not fall within any exclusion. Moreover, they are further processed in a manner that does not change the physical characteristics such that the product is part of a class or kind of merchandise distinct from SSSS subject to the orders; May 9, 2022. A–570–117 and C–570–118: Wood Mouldings and Millwork Products From China Requestor: Loveday Lumber Company, Inc. Lengthwise sawn (LWS) scarf-jointed wood reveal strips and LWS scarf-jointed wood squares are not covered by the scope of the AD order on wood mouldings and millwork products from China because they are not continuously shaped wood or finger- jointed or edge-glued mouldings or millwork blanks; May 16, 2022. A–570–010 and C–570–011: Crystalline Silicon Photovoltaic Products From China Requestor: HT Solar Enerji AS. HT Solar Enerji AS’s cells and modules produced in Turkey from wafers sourced globally (e.g., China, Korea, Malaysia, and Vietnam) do not fall within the scope of the AD and CVD orders on crystalline silicon photovoltaic products from China; June 15, 2022. A–570–133 and C–570–134: Certain Metal Lockers and Parts Thereof From China Requestor: Hornady Manufacturing Co. (Hornady). RAPiD Safe Ready Vaults imported by Hornady are covered by the AD and CVD orders on certain metal lockers and parts thereof (lockers) from China because they meet the physical specifications of merchandise expressly covered by the scope and do not meet all requirements necessary to qualify for either the gun safe exclusion or the safe exclusion explicitly enumerated in the scope language. SnapSafe Titan metal gun vaults imported by Hornady are not covered by the AD and CVD orders on lockers from China because they meet all requirements necessary to qualify for the gun safe exclusion explicitly enumerated in the scope language; June 23, 2022. A–570–090 and C–570–091: Certain Steel Wheels 12 to 16.5 Inches in Diameter From China Requestor: Allied Wheel Components, Inc. (Allied Wheel). Passenger vehicle wheel model numbers X–45282, X– 45329, X–45333, X–45334, X–45337, X– 45399, X–45401, X–45460, X–45463, and X–45477 imported by Allied Wheel are not covered by the scope of the AD and CVD orders on certain steel wheels 12 to 16.5 inches in diameter (steel wheels) from China because they have different bolt patterns, offsets, pilot diameters, and/or load ratings that make them unsuitable for use on trailer or towable equipment. Passenger vehicle wheel model number X–45304 imported by Allied Wheel is not covered by the scope of the AD and CVD orders on steel wheels from China because the expectations of ultimate purchasers, ultimate use, and manner in which the product is advertised and displayed distinguish it from in-scope wheels; June 23, 2022. A–570–117 and C–570–118: Wood Mouldings and Millwork Products From China Requestor: Composite Technology International, Inc. Flat jambs and super and stapled jambs are covered by the scope of the antidumping duty order on wood mouldings and millwork products from China because they are manufactured from wood and do not contain more than 50 percent composite material; June 27, 2022. Notification to Interested Parties Interested parties are invited to comment on the completeness of this list of completed scope inquiries and anti-circumvention determinations made during the period April 1, 2022 through June 30, 2022. Any comments should be submitted to the Deputy Assistant Secretary for AD/CVD Operations, Enforcement and Compliance, International Trade Administration, via email to CommerceCLU@trade.gov. This notice is published in accordance with 19 CFR 351.225(o). Dated: August 19, 2022. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2022–18330 Filed 8–24–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–351–843, A–570–029, A–533–865, A–588– 873, A–580–881, A–412–824, C–533–866, C– 351–844] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, the Republic of Korea, and the United Kingdom: Continuation of Antidumping Duty Orders (China, Japan, Korea, and UK), Continuation of Antidumping and Countervailing Duty Orders (India), and Revocation of Antidumping and Countervailing Duty Orders (Brazil) AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) and countervailing duty (CVD) orders on certain cold-rolled steel flat products (cold-rolled steel) from the People’s Republic of China (China), India, Japan, the Republic of Korea (Korea), and the United Kingdom (UK) would likely lead to continuation or recurrence of dumping, net countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of the AD and CVD orders. In addition, as a result of the ITC’s determination that revocation of the AD and CVD orders on certain cold- rolled steel from Brazil is not likely to lead to continuation or recurrence of material injury to an industry in the United States, Commerce is revoking the AD and CVD orders on cold-rolled steel from Brazil. DATES : Applicable August 25, 2022. FOR FURTHER INFORMATION CONTACT : Reginald Anadio, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3166. SUPPLEMENTARY INFORMATION : Background On July 14 and September 20, 2016, Commerce published in the Federal Register the China and Japan AD Orders and the Brazil, India, Korea, and United Kingdom AD Orders, respectively.1 On VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52361Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices India, the Republic of Korea, and the United Kingdom: Amended Final Affirmative Antidumping Determinations for Brazil and the United Kingdom and Antidumping Duty Orders, 81 FR 64432 (September 20, 2016) (Brazil, India, Korea, and United Kingdom AD Orders). 2 See Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (India and Brazil CVD Orders). 3 See Initiation of Five-Year (Sunset) Review, 86 FR 29239 (June 1, 2021). 4 See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, Republic of Korea, and United Kingdom: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 86 FR 54924 (October 5, 2021); see also Cold-Rolled Steel Flat Products from India: Final Results of the Expedited Five-Year Sunset Review of the Countervailing Duty Order, 86 FR 54421 (October 1, 2021); and Certain Cold-Rolled Steel Flat Products of Brazil: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 87 FR 77 (January 3, 2022). 5 See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and the United Kingdom, 87 FR 49886 (August 12, 2022). 6 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) Continued September 20, 2016, Commerce published in the Federal Register the India and Brazil CVD Orders (collectively with AD Orders, Orders).2 On June 1, 2021, Commerce published the notice of initiation of the sunset reviews of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).3 Commerce conducted expedited (120-day) sunset reviews of the Orders, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2). As a result of its reviews, Commerce determined pursuant to sections 751(c)(1) and 752(c) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of dumping and countervailable subsidies. Commerce also notified the ITC of the magnitude of the dumping margins and net countervailable subsidies likely to prevail should the Orders be revoked. 4 On August 12, 2022, the ITC published its determination, pursuant to section 751(c) of the Act, that revocation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India, would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time, and that revocation of the AD and CVD orders on cold-rolled steel from Brazil would not be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time.5 Scope of the Orders: Brazil, India, Korea, the United Kingdom, and China The products covered by the orders with respect to Brazil, India, Korea, the United Kingdom, and China are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross- section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the Brazil, India, Korea, the United Kingdom, and China orders if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of the Brazil, India, Korea, the United Kingdom, and China orders unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of the Brazil, India, Korea, the United Kingdom, and China orders: • Ball bearing steels; 6 VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52362 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 7 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) more than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 8 Silico-manganese steel is defined as steels containing by weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 9 See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014). This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ 10 See Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741–42 (December 3, 2014). The orders define NOES as ‘‘cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ 11 As result of a changed circumstances review, Commerce modified the scope of the order on cold- rolled steel from Japan to specify an exclusion on certain cold-rolled steel from Japan. See Certain Cold-Rolled Steel Flat Products from Japan: Final Results of Changed Circumstances Review, and Revocation of Antidumping Duty Order, in Part, 82 FR 12337 (March 2, 2017); see also See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, Republic of Korea, and United Kingdom: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 86 FR 54924 (October 5, 2021), and accompanying Issues and Decision Memorandum at 17, n.73. • Tool steels; 7 • Silico-manganese steel; 8 • Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel From Germany, Japan, and Poland. 9 • Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non- Oriented Electrical Steel From the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.10 The products subject to the Brazil, India, Korea, the United Kingdom, and China orders are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the Brazil, India, Korea, the United Kingdom, and China orders may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the investigation is dispositive. Scope of the Order: Japan 11 The products covered by the order on Japan are certain cold-rolled (cold- reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this order are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium. Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52363Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 12 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) Not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 13 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) More than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 14 Silico-manganese steel is defined as steels containing by weight: (i) Not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 15 See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014) (Grain-Oriented Electrical Steel from Germany, Japan, and Poland). This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ 16 See Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741– 71742 (December 3, 2014) (Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan). The orders define NOES as ‘‘cold- rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (‘‘IF’’)) steels, high strength low alloy (‘‘HSLA’’) steels, motor lamination steels, Advanced High Strength Steels (‘‘AHSS’’), and Ultra High Strength Steels (‘‘UHSS’’). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the order if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this order unless specifically excluded. The following products are outside of and/ or specifically excluded from the scope of this order: • Ball bearing steels; 12 • Tool steels; 13 • Silico-manganese steel; 14 • Grain-oriented electrical steel (‘‘GOES’’) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel from Germany, Japan, and Poland.15 • Non-Oriented Electrical Steels (‘‘NOES’’), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non- Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.16 Also excluded from the scope of this order is ultra-tempered automotive steel, which is hardened, tempered, surface polished, and meets the following specifications: • Thickness: Less than or equal to 1.0 mm; • Width: Less than or equal to 330 mm; • Chemical composition: Element C Si Mn P S Weight % .... 0.90–1.05 0.15–0.35 0.30–0.50 Less than or equal to 0.03 ................. Less than or equal to 0.006. Physical properties: Width less than or equal to 150 mm ........................................................ Flatness of less than 0.2% of nominal strip width. Width of 150 to 330 mm ........................................................................... Flatness of less than 5mm of nominal strip width. • Microstructure: Completely free from decarburization. Carbides are spheroidal and fine within 1% to 4% (area percentage) and are undissolved in the uniform tempered martensite; • Surface roughness: less than or equal to 0.80 to mm Rz; • Non-metallic inclusion: • Sulfide inclusion less than or equal to 0.04% (area percentage); • Oxide inclusion less than or equal to 0.05% (area percentage); and • The mill test certificate must demonstrate that the steel is proprietary grade ‘‘PK’’ and specify the following: • The exact tensile strength, which must be greater than or equal to 1600 N/ mm2; • The exact hardness, which must be greater than or equal to 465 Vickers hardness number; • The exact elongation, which must be between 2.5% and 9.5%; and • Certified as having residual compressive stress within a range of 100 to 400 N/mm 2. Also excluded from the scope of this order is certain cold-rolled flat-rolled VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52364 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 17 See Orders. steel meeting the requirements of ASTM A424 Type 1 and having each of the following characteristics: • Continuous annealed cold-reduced steel in coils with a thickness of between 0.30 mm and 0.36 mm that is in widths either from 875 mm to 940 mm or from 1,168 to 1,232 mm; • a chemical composition, by weight, of: D Not more than 0.004% carbon; D not more than 0.010% aluminum; D 0.006%–0.010% nitrogen; D 0.012%–0.030% boron; D 0.010%–0.025% oxygen; D less than 0.002% of titanium; D less than 0.002% by weight of vanadium; D less than 0.002% by weight of niobium; D less than 0.002% by weight of antimony; • a yield strength of from 179.3 MPa to 344.7 MPa; • a tensile strength of from 303.7 MPa to 413.7 MPa; • a percent of elongation of from 28% to 46% on a standard ASTM sample with a 5.08 mm gauge length; • a product shape of flat after annealing, with flat defined as less than or equal to 1 I unit with no coil set as set forth in ASTM A568, Appendix X5 (alternate methods for expressing flatness). The products subject to this order are currently classified in the Harmonized Tariff Schedule of the United States (‘‘HTSUS’’) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs and Border Protection (CBP) purposes only. The written description of the scope of the order is dispositive. Continuation of the AD and CVD Orders on Cold-Rolled Steel From China, India, Japan, Korea, and the UK As a result of the determinations by Commerce and the ITC that revocation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the AD orders on cold- rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next sunset review of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India not later than 30 days prior to the fifth anniversary of the effective date of continuation. Revocation of the AD and CVD Orders on Cold-Rolled Steel From Brazil As a result of the determination by the ITC that revocation of the AD and CVD orders on cold-rolled steel from Brazil would not be likely to lead to continuation or recurrence of material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, 19 CFR 351.222(i)(1)(iii), and 19 CFR 351.218(a), Commerce is revoking the AD and CVD orders on cold-rolled steel from Brazil. Pursuant to section 751(d)(3) of the Act and 19 CFR 351.222(i)(2)(i), the effective date of revocation is September 20, 2021 (i.e., the fifth anniversary of the date of publication in the Federal Register of the notice of the AD and CVD orders).17 Cash Deposits and Assessment of Duties on Cold-Rolled Steel From Brazil Commerce intends to notify CBP to terminate the suspension of liquidation and to discontinue the collection of AD and CVD cash deposits on entries of cold-rolled steel from Brazil, entered or withdrawn from warehouse, on or after September 20, 2021. Commerce intends to further instruct CBP to refund with interest all cash deposits on unliquidated entries made on or after September 20, 2021. Entries of subject merchandise prior to the effective date of revocation will continue to be subject to suspension of liquidation and AD and CVD deposit requirements and assessments. Administrative Protective Order (APO) This notice also serves as the only reminder to parties subject to APO of their responsibility concerning the return, destruction, or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO which may be subject to sanctions. Notification to Interested Parties This five-year sunset review and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and this notice is published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: August 19, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–18348 Filed 8–24–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–041] Truck and Bus Tires From the People’s Republic of China: Amended Final Results of Countervailing Duty Administrative Review in Part; 2020 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Initiation === 29239Federal Register / Vol. 86, No. 103 / Tuesday, June 1, 2021 / Notices Comment 3: Whether Commerce Incorrectly Countervailed the Reduction for Sewerage Usage Fees Comment 4: Whether the Restructuring of Dongbu’s Existing Loans by GOK- Controlled Banks Provided a Financial Contribution to Dongbu Comment 5: Whether the Restructured Loans Provided to Dongbu were Specific Comment 6: Whether Commerce Should Use the Interest Rates from Loans Provided by Commercial Banks Participating in the Creditor Bank Committee as Benchmarks Comment 7: Whether Dongbu Is Equityworthy and the Debt-to-Equity Swaps Should be Countervailed Comment 8: Whether Commerce Correctly Calculated the Benefit to Dongbu from KDB Short-Term Discounted Loans for Export Receivables Program Comment 9: Whether Commerce Correctly Calculated the Benefit from Dongbu Steel’s Short-Term KRW Loans During the POR XI. Recommendation Appendix II List of Non-Selected Companies 1. AJU Steel Co., Ltd. 2. Anjeon Tech 3. Benison Korea Transport 4. Core International 5. CS Global Logistics 6. Dai Yang Metal Co., Ltd. 7. GS Global Corp. 8. Hanwa (Korea) Co., Ltd. 9. Hebei Hongxing Auto Made 10. Integris 11. Jeongwha Polytech 12. Joo Sung Sea And AirCo., Ltd. 13. KC Tech 14. Kima Steel Corporation 15. Korea Clad Tech 16. Kyoungdo Steel Co., Ltd. 17. Market Connect Sales Services 18. Milestone Korea Co., Ltd. 19. POSCO 20. POSCO Coated & Color Steel Co., Ltd. 21. POSCO Daewoo Corporation 22. POSCO International Corporation 23. Qingdao Wangbaoqiang 24. Roser Co., Ltd. 25. Samsung C&T Corporation 26. Sanglim Steel 27. SeAH Steel 28. Sejung Shipping Co., Ltd. 29. Seun Steel 30. Shandongsheng Cao Xian Yalu Mftd. 31. Sung A Steel 32. TCC Steel Co., Ltd. 33. Young Heung Iron and Steel Co., Ltd. 34. Young Steel Korea Co., Ltd. 35. Young Sun Steel Co. [FR Doc. 2021–11387 Filed 5–28–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Initiation of Five-Year (Sunset) Reviews AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The Department of Commerce (Commerce) is automatically initiating the five-year reviews (Sunset Reviews) of the antidumping duty (AD) and countervailing duty (CVD) order(s) and suspended investigation(s) listed below. The International Trade Commission (the ITC) is publishing concurrently with this notice its notice of Institution of Five-Year Reviews which covers the same order(s) and suspended investigation(s). DATES : Applicable (June 1, 2021). FOR FURTHER INFORMATION CONTACT : Commerce official identified in the ‘‘Initiation of Review’’ section below at AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. For information from the ITC, contact Mary Messer, Office of Investigations, U.S. International Trade Commission at (202) 205–3193. SUPPLEMENTARY INFORMATION : Background Commerce’s procedures for the conduct of Sunset Reviews are set forth in its Procedures for Conducting Five- Year (Sunset) Reviews of Antidumping and Countervailing Duty Orders, 63 FR 13516 (March 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues relevant to Commerce’s conduct of Sunset Reviews is set forth in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012). Initiation of Review In accordance with section 751(c) of the Tariff Act of 1930, as amended (the Act) and 19 CFR 351.218(c), we are initiating the Sunset Reviews of the following antidumping and countervailing duty order(s) and suspended investigation(s): DOC case No. ITC case No. Country Product Commerce contact A–351–843 .... 731–TA–1283 Brazil ........... Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–570–029 .... 731–TA–1284 China ........... Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–570–894 .... 731–TA– 1070–B China ........... Tissue Paper Products (3rd Review) ........................ Mary Kolberg, (202) 482–1785. A–570–896 .... 731–TA–1071 China ........... Magnesium Metal (3rd Review) ................................ Mary Kolberg, (202) 482–1785. A–570–026 .... 731–TA–1274 China ........... Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. A–533–865 .... 731–TA–1285 India ............ Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–475–832 .... 731–TA–1276 Italy ............. Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. A–588–873 .... 731–TA–1286 Japan .......... Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–580–881 .... 731–TA–1287 South Korea Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–580–878 .... 731–TA–1277 South Korea Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. A–583–856 .... 731–TA–1278 Taiwan ........ Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. A–412–824 .... 731–TA–1290 United King- dom. Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. A–533–863 .... 731–TA–1275 India ............ Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. C–351–844 .... 701–TA–540 Brazil ........... Cold-Rolled Steel Flat Products (1st Review) .......... Mary Kolberg, (202) 482–1785. C–570–027 .... 701–TA–534 China ........... Corrosion-Resistant Steel Products (1st Review) .... Jacqueline Arrowsmith, (202) 482–5255. C–570–030 .... 701–TA–541 China ........... Cold-Rolled Steel Flat Products (1st Review) .......... Jacqueline Arrowsmith, (202) 482–5255. C–533–866 .... 701–TA–542 India ............ Cold-Rolled Steel Flat Products (1st Review) .......... Thomas Martin, (202) 482–3936. C–533–864 .... 701–TA–535 India ............ Corrosion-Resistant Steel Products (1st Review) .... Thomas Martin, (202) 482–3936. C–475–833 .... 701–TA–536 Italy ............. Corrosion-Resistant Steel Products (1st Review) .... Thomas Martin, (202) 482–3936. C–580–882 .... 701–TA–543 South Korea Cold-Rolled Steel Flat Products (1st Review) .......... Jacqueline Arrowsmith, (202) 482–5255. C–580–879 .... 701–TA–537 South Korea Corrosion-Resistant Steel Products (1st Review) .... Mary Kolberg, (202) 482–1785. VerDate Sep<11>2014 18:20 May 28, 2021 Jkt 253001 PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 E:\FR\FM\01JNN1.SGM 01JNN1 jbell on DSKJLSW7X2PROD with NOTICES 29240 Federal Register / Vol. 86, No. 103 / Tuesday, June 1, 2021 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19, 85 FR 41363 (July 10, 2020). 2 See 19 CFR 351.218(d)(1)(iii). Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https:// enforcement.trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in section 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct from the ITC ’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR part 351 for definitions of terms and for other general information concerning antidumping and countervailing duty proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: May 20, 2021. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2021–11473 Filed 5–28–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. FOR FURTHER INFORMATION CONTACT : Brenda E. Brown, Office of AD/CVD Operations, Customs Liaison Unit, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, telephone: (202) 482–4735. Background Each year during the anniversary month of the publication of an antidumping or countervailing duty order, finding, or suspended investigation, an interested party, as defined in section 771(9) of the Tariff Act of 1930, as amended (the Act), may request, in accordance with 19 CFR 351.213, that the Department of Commerce (Commerce) conduct an administrative review of that antidumping or countervailing duty order, finding, or suspended investigation. All deadlines for the submission of comments or actions by Commerce discussed below refer to the number of calendar days from the applicable starting date. Respondent Selection In the event Commerce limits the number of respondents for individual examination for administrative reviews initiated pursuant to requests made for the orders identified below, Commerce intends to select respondents based on U.S. Customs and Border Protection (CBP) data for U.S. imports during the period of review. We intend to release the CBP data under Administrative Protective Order (APO) to all parties having an APO within five days of publication of the initiation notice and to make our decision regarding respondent selection within 35 days of publication of the initiation Federal Register notice. Therefore, we encourage all parties interested in commenting on respondent selection to submit their APO applications on the date of publication of the initiation notice, or as soon thereafter as possible. Commerce invites comments regarding the CBP data and respondent selection within five days of placement of the CBP data on the record of the review. VerDate Sep<11>2014 18:20 May 28, 2021 Jkt 253001 PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 E:\FR\FM\01JNN1.SGM 01JNN1 jbell on DSKJLSW7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Continuation - AD/CVD - China - Japan - South Korea, - United Kingdom - India === 52360 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 1 See Certain Cold-Rolled Steel Flat Products from Japan and the People’s Republic of China: Antidumping Duty Orders, 81 FR 45956 (July 14, 2016) (China and Japan AD Orders); see also Certain Cold-Rolled Steel Flat Products from Brazil, or with other components, are covered by the scope of the AD and CVD orders on stainless steel sheet and strip (SSSS) from China because they meet all physical specifications of subject merchandise and do not fall within any exclusion. Moreover, they are further processed in a manner that does not change the physical characteristics such that the product is part of a class or kind of merchandise distinct from SSSS subject to the orders; May 9, 2022. A–570–117 and C–570–118: Wood Mouldings and Millwork Products From China Requestor: Loveday Lumber Company, Inc. Lengthwise sawn (LWS) scarf-jointed wood reveal strips and LWS scarf-jointed wood squares are not covered by the scope of the AD order on wood mouldings and millwork products from China because they are not continuously shaped wood or finger- jointed or edge-glued mouldings or millwork blanks; May 16, 2022. A–570–010 and C–570–011: Crystalline Silicon Photovoltaic Products From China Requestor: HT Solar Enerji AS. HT Solar Enerji AS’s cells and modules produced in Turkey from wafers sourced globally (e.g., China, Korea, Malaysia, and Vietnam) do not fall within the scope of the AD and CVD orders on crystalline silicon photovoltaic products from China; June 15, 2022. A–570–133 and C–570–134: Certain Metal Lockers and Parts Thereof From China Requestor: Hornady Manufacturing Co. (Hornady). RAPiD Safe Ready Vaults imported by Hornady are covered by the AD and CVD orders on certain metal lockers and parts thereof (lockers) from China because they meet the physical specifications of merchandise expressly covered by the scope and do not meet all requirements necessary to qualify for either the gun safe exclusion or the safe exclusion explicitly enumerated in the scope language. SnapSafe Titan metal gun vaults imported by Hornady are not covered by the AD and CVD orders on lockers from China because they meet all requirements necessary to qualify for the gun safe exclusion explicitly enumerated in the scope language; June 23, 2022. A–570–090 and C–570–091: Certain Steel Wheels 12 to 16.5 Inches in Diameter From China Requestor: Allied Wheel Components, Inc. (Allied Wheel). Passenger vehicle wheel model numbers X–45282, X– 45329, X–45333, X–45334, X–45337, X– 45399, X–45401, X–45460, X–45463, and X–45477 imported by Allied Wheel are not covered by the scope of the AD and CVD orders on certain steel wheels 12 to 16.5 inches in diameter (steel wheels) from China because they have different bolt patterns, offsets, pilot diameters, and/or load ratings that make them unsuitable for use on trailer or towable equipment. Passenger vehicle wheel model number X–45304 imported by Allied Wheel is not covered by the scope of the AD and CVD orders on steel wheels from China because the expectations of ultimate purchasers, ultimate use, and manner in which the product is advertised and displayed distinguish it from in-scope wheels; June 23, 2022. A–570–117 and C–570–118: Wood Mouldings and Millwork Products From China Requestor: Composite Technology International, Inc. Flat jambs and super and stapled jambs are covered by the scope of the antidumping duty order on wood mouldings and millwork products from China because they are manufactured from wood and do not contain more than 50 percent composite material; June 27, 2022. Notification to Interested Parties Interested parties are invited to comment on the completeness of this list of completed scope inquiries and anti-circumvention determinations made during the period April 1, 2022 through June 30, 2022. Any comments should be submitted to the Deputy Assistant Secretary for AD/CVD Operations, Enforcement and Compliance, International Trade Administration, via email to CommerceCLU@trade.gov. This notice is published in accordance with 19 CFR 351.225(o). Dated: August 19, 2022. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2022–18330 Filed 8–24–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–351–843, A–570–029, A–533–865, A–588– 873, A–580–881, A–412–824, C–533–866, C– 351–844] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, the Republic of Korea, and the United Kingdom: Continuation of Antidumping Duty Orders (China, Japan, Korea, and UK), Continuation of Antidumping and Countervailing Duty Orders (India), and Revocation of Antidumping and Countervailing Duty Orders (Brazil) AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) and countervailing duty (CVD) orders on certain cold-rolled steel flat products (cold-rolled steel) from the People’s Republic of China (China), India, Japan, the Republic of Korea (Korea), and the United Kingdom (UK) would likely lead to continuation or recurrence of dumping, net countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of the AD and CVD orders. In addition, as a result of the ITC’s determination that revocation of the AD and CVD orders on certain cold- rolled steel from Brazil is not likely to lead to continuation or recurrence of material injury to an industry in the United States, Commerce is revoking the AD and CVD orders on cold-rolled steel from Brazil. DATES : Applicable August 25, 2022. FOR FURTHER INFORMATION CONTACT : Reginald Anadio, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3166. SUPPLEMENTARY INFORMATION : Background On July 14 and September 20, 2016, Commerce published in the Federal Register the China and Japan AD Orders and the Brazil, India, Korea, and United Kingdom AD Orders, respectively.1 On VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52361Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices India, the Republic of Korea, and the United Kingdom: Amended Final Affirmative Antidumping Determinations for Brazil and the United Kingdom and Antidumping Duty Orders, 81 FR 64432 (September 20, 2016) (Brazil, India, Korea, and United Kingdom AD Orders). 2 See Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (India and Brazil CVD Orders). 3 See Initiation of Five-Year (Sunset) Review, 86 FR 29239 (June 1, 2021). 4 See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, Republic of Korea, and United Kingdom: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 86 FR 54924 (October 5, 2021); see also Cold-Rolled Steel Flat Products from India: Final Results of the Expedited Five-Year Sunset Review of the Countervailing Duty Order, 86 FR 54421 (October 1, 2021); and Certain Cold-Rolled Steel Flat Products of Brazil: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 87 FR 77 (January 3, 2022). 5 See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and the United Kingdom, 87 FR 49886 (August 12, 2022). 6 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) Continued September 20, 2016, Commerce published in the Federal Register the India and Brazil CVD Orders (collectively with AD Orders, Orders).2 On June 1, 2021, Commerce published the notice of initiation of the sunset reviews of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).3 Commerce conducted expedited (120-day) sunset reviews of the Orders, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2). As a result of its reviews, Commerce determined pursuant to sections 751(c)(1) and 752(c) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of dumping and countervailable subsidies. Commerce also notified the ITC of the magnitude of the dumping margins and net countervailable subsidies likely to prevail should the Orders be revoked. 4 On August 12, 2022, the ITC published its determination, pursuant to section 751(c) of the Act, that revocation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India, would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time, and that revocation of the AD and CVD orders on cold-rolled steel from Brazil would not be likely to lead to continuation or recurrence of material injury within a reasonably foreseeable time.5 Scope of the Orders: Brazil, India, Korea, the United Kingdom, and China The products covered by the orders with respect to Brazil, India, Korea, the United Kingdom, and China are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross- section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the Brazil, India, Korea, the United Kingdom, and China orders if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of the Brazil, India, Korea, the United Kingdom, and China orders unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of the Brazil, India, Korea, the United Kingdom, and China orders: • Ball bearing steels; 6 VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52362 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 7 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) more than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 8 Silico-manganese steel is defined as steels containing by weight: (i) not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 9 See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014). This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ 10 See Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741–42 (December 3, 2014). The orders define NOES as ‘‘cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ 11 As result of a changed circumstances review, Commerce modified the scope of the order on cold- rolled steel from Japan to specify an exclusion on certain cold-rolled steel from Japan. See Certain Cold-Rolled Steel Flat Products from Japan: Final Results of Changed Circumstances Review, and Revocation of Antidumping Duty Order, in Part, 82 FR 12337 (March 2, 2017); see also See Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, Republic of Korea, and United Kingdom: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 86 FR 54924 (October 5, 2021), and accompanying Issues and Decision Memorandum at 17, n.73. • Tool steels; 7 • Silico-manganese steel; 8 • Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel From Germany, Japan, and Poland. 9 • Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non- Oriented Electrical Steel From the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.10 The products subject to the Brazil, India, Korea, the United Kingdom, and China orders are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the Brazil, India, Korea, the United Kingdom, and China orders may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the investigation is dispositive. Scope of the Order: Japan 11 The products covered by the order on Japan are certain cold-rolled (cold- reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non- rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this order are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated: • 2.50 percent of manganese, or • 3.30 percent of silicon, or • 1.50 percent of copper, or • 1.50 percent of aluminum, or • 1.25 percent of chromium, or • 0.30 percent of cobalt, or • 0.40 percent of lead, or • 2.00 percent of nickel, or • 0.30 percent of tungsten (also called wolfram), or • 0.80 percent of molybdenum, or • 0.10 percent of niobium (also called columbium), or • 0.30 percent of vanadium, or • 0.30 percent of zirconium. Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium. VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52363Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 12 Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by weight in the amount specified: (i) Not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22 nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none, or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum. 13 Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight respectively indicated: (i) More than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85 percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive, chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten. 14 Silico-manganese steel is defined as steels containing by weight: (i) Not more than 0.7 percent of carbon; (ii) 0.5 percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3 percent of silicon. 15 See Grain-Oriented Electrical Steel from Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative Determination of Critical Circumstances, 79 FR 42501, 42503 (July 22, 2014) (Grain-Oriented Electrical Steel from Germany, Japan, and Poland). This determination defines grain-oriented electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6 percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight lengths.’’ 16 See Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan: Antidumping Duty Orders, 79 FR 71741, 71741– 71742 (December 3, 2014) (Non-Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan). The orders define NOES as ‘‘cold- rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term ‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied.’’ For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (‘‘IF’’)) steels, high strength low alloy (‘‘HSLA’’) steels, motor lamination steels, Advanced High Strength Steels (‘‘AHSS’’), and Ultra High Strength Steels (‘‘UHSS’’). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro- alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels. Subject merchandise includes cold- rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the order if performed in the country of manufacture of the cold-rolled steel. All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this order unless specifically excluded. The following products are outside of and/ or specifically excluded from the scope of this order: • Ball bearing steels; 12 • Tool steels; 13 • Silico-manganese steel; 14 • Grain-oriented electrical steel (‘‘GOES’’) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel from Germany, Japan, and Poland.15 • Non-Oriented Electrical Steels (‘‘NOES’’), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non- Oriented Electrical Steel from the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.16 Also excluded from the scope of this order is ultra-tempered automotive steel, which is hardened, tempered, surface polished, and meets the following specifications: • Thickness: Less than or equal to 1.0 mm; • Width: Less than or equal to 330 mm; • Chemical composition: Element C Si Mn P S Weight % .... 0.90–1.05 0.15–0.35 0.30–0.50 Less than or equal to 0.03 ................. Less than or equal to 0.006. Physical properties: Width less than or equal to 150 mm ........................................................ Flatness of less than 0.2% of nominal strip width. Width of 150 to 330 mm ........................................................................... Flatness of less than 5mm of nominal strip width. • Microstructure: Completely free from decarburization. Carbides are spheroidal and fine within 1% to 4% (area percentage) and are undissolved in the uniform tempered martensite; • Surface roughness: less than or equal to 0.80 to mm Rz; • Non-metallic inclusion: • Sulfide inclusion less than or equal to 0.04% (area percentage); • Oxide inclusion less than or equal to 0.05% (area percentage); and • The mill test certificate must demonstrate that the steel is proprietary grade ‘‘PK’’ and specify the following: • The exact tensile strength, which must be greater than or equal to 1600 N/ mm2; • The exact hardness, which must be greater than or equal to 465 Vickers hardness number; • The exact elongation, which must be between 2.5% and 9.5%; and • Certified as having residual compressive stress within a range of 100 to 400 N/mm 2. Also excluded from the scope of this order is certain cold-rolled flat-rolled VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES 52364 Federal Register / Vol. 87, No. 164 / Thursday, August 25, 2022 / Notices 17 See Orders. steel meeting the requirements of ASTM A424 Type 1 and having each of the following characteristics: • Continuous annealed cold-reduced steel in coils with a thickness of between 0.30 mm and 0.36 mm that is in widths either from 875 mm to 940 mm or from 1,168 to 1,232 mm; • a chemical composition, by weight, of: D Not more than 0.004% carbon; D not more than 0.010% aluminum; D 0.006%–0.010% nitrogen; D 0.012%–0.030% boron; D 0.010%–0.025% oxygen; D less than 0.002% of titanium; D less than 0.002% by weight of vanadium; D less than 0.002% by weight of niobium; D less than 0.002% by weight of antimony; • a yield strength of from 179.3 MPa to 344.7 MPa; • a tensile strength of from 303.7 MPa to 413.7 MPa; • a percent of elongation of from 28% to 46% on a standard ASTM sample with a 5.08 mm gauge length; • a product shape of flat after annealing, with flat defined as less than or equal to 1 I unit with no coil set as set forth in ASTM A568, Appendix X5 (alternate methods for expressing flatness). The products subject to this order are currently classified in the Harmonized Tariff Schedule of the United States (‘‘HTSUS’’) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs and Border Protection (CBP) purposes only. The written description of the scope of the order is dispositive. Continuation of the AD and CVD Orders on Cold-Rolled Steel From China, India, Japan, Korea, and the UK As a result of the determinations by Commerce and the ITC that revocation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the AD orders on cold- rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next sunset review of the AD orders on cold-rolled steel from China, India, Japan, Korea, and the UK, and the AD and CVD orders on cold-rolled steel from India not later than 30 days prior to the fifth anniversary of the effective date of continuation. Revocation of the AD and CVD Orders on Cold-Rolled Steel From Brazil As a result of the determination by the ITC that revocation of the AD and CVD orders on cold-rolled steel from Brazil would not be likely to lead to continuation or recurrence of material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, 19 CFR 351.222(i)(1)(iii), and 19 CFR 351.218(a), Commerce is revoking the AD and CVD orders on cold-rolled steel from Brazil. Pursuant to section 751(d)(3) of the Act and 19 CFR 351.222(i)(2)(i), the effective date of revocation is September 20, 2021 (i.e., the fifth anniversary of the date of publication in the Federal Register of the notice of the AD and CVD orders).17 Cash Deposits and Assessment of Duties on Cold-Rolled Steel From Brazil Commerce intends to notify CBP to terminate the suspension of liquidation and to discontinue the collection of AD and CVD cash deposits on entries of cold-rolled steel from Brazil, entered or withdrawn from warehouse, on or after September 20, 2021. Commerce intends to further instruct CBP to refund with interest all cash deposits on unliquidated entries made on or after September 20, 2021. Entries of subject merchandise prior to the effective date of revocation will continue to be subject to suspension of liquidation and AD and CVD deposit requirements and assessments. Administrative Protective Order (APO) This notice also serves as the only reminder to parties subject to APO of their responsibility concerning the return, destruction, or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO which may be subject to sanctions. Notification to Interested Parties This five-year sunset review and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and this notice is published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: August 19, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022–18348 Filed 8–24–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–041] Truck and Bus Tires From the People’s Republic of China: Amended Final Results of Countervailing Duty Administrative Review in Part; 2020 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. VerDate Sep<11>2014 16:25 Aug 24, 2022 Jkt 256001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\25AUN1.SGM 25AUN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Final Results - AD - Brazil - China - India - Japan - South Korea - United Kingdom === 54924 Federal Register / Vol. 86, No. 190 / Tuesday, October 5, 2021 / Notices 1 See Certain Cold-Rolled Steel Flat Products from Japan and the People’s Republic of China: Antidumping Duty Orders, 81 FR 45956 (July 14, 2016) (China and Japan Orders); see also Certain Cold-Rolled Steel Flat Products from Brazil, India, the Republic of Korea, and the United Kingdom: Amended Final Affirmative Antidumping Determinations for Brazil and the United Kingdom and Antidumping Duty Orders, 81 FR 64432 (September 20, 2016) (Brazil, India, Korea, and United Kingdom Orders). 2 See Initiation of Five-Year (Sunset) Review, 86 FR 29239 (June 1, 2021) (Initiation Notice). 3 Cleveland-Cliffs acquired AK Steel and the majority of the U.S. operations of Arcelor Mittal USA LLC, two firms that were among the domestic producing petitioners in the original investigations. See, e.g., Domestic Interested Parties’ Letter, ‘‘First Five-Year (‘‘Sunset’’) Review of the Antidumping Order on Cold-Rolled Steel Flat Products from Brazil: Domestic Industry’s Substantive Response to Notice of Initiation,’’ dated July 1, 2021. 4 California Steel Industries is a domestic interested party for all proceedings except for Brazil and Japan. See Domestic Interested Parties’ Letters, ‘‘First Five-Year (‘‘Sunset’’) Review of the Antidumping Order on Cold-Rolled Steel Flat Products from Brazil: Domestic Industry’s Substantive Response to Notice of Initiation,’’ dated July 1, 2021; see also ‘‘Cold-Rolled Steel Flat Products from the People’s Republic of China: Substantive Response of the Domestic Interested Parties to Commerce’s Notice of Initiation of Five- Year (‘‘Sunset’’) Reviews,’’ dated July 1, 2021; ‘‘First Five-Year (‘‘Sunset’’) Review of the Antidumping Order on Cold-Rolled Steel Flat Products from India: Domestic Industry’s Substantive Response to Notice of Initiation,’’ dated July 1, 2021; ‘‘Cold- Rolled Steel Flat Products from Japan: Substantive Response of the Domestic Interested Parties to Commerce’s Notice of Initiation of Five-Year (‘‘Sunset’’) Reviews,’’ dated July 1, 2021; ‘‘Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Substantive Response to Notice of Initiation of Sunset Review,’’ dated July 1, 2021; and ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order On Cold-Rolled Flat Products From the United Kingdom: Domestic Industry Substantive Response,’’ dated July 1, 2021 (collectively, Substantive Responses). 5 See Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products from Brazil: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; see also United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products from Brazil: Notice of Intent to Participate,’’ dated June 16, 2021; Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Antidumping Duty Order on Cold-Rolled Steel Flat Products from Brazil,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from Brazil: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products From China: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping and Countervailing Duty Orders on Cold-Rolled Steel Flat Products from China: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel Industries’ and Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five- Year Review of the Antidumping Duty Order on Cold-Rolled Steel Flat Products from the People’s Republic of China,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from the People’s Republic of China: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products From India: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping and Countervailing Duty Orders on Cold-Rolled Steel Flat Products from India: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel Industries’ and Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Antidumping Duty Order on Cold-Rolled Steel Flat Products from India,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from India: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products From Japan: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products from Japan: Notice of Intent to Participate,’’ dated June 16, 2021; Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Antidumping Duty Order on Cold-Rolled Steel Flat Products from Japan,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from Japan: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; Cleveland- Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products From the Republic of Korea: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping and Countervailing Duty Orders on Cold-Rolled Steel Flat Products from South Korea: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel Industries’ and Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five- Year Review of the Antidumping Duty order on Cold-Rolled Steel Flat Products from the Republic of Korea,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products From the United Kingdom: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; United States Steel Corporation’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Antidumping Duty Order on Cold-Rolled Steel Flat Products from the United Kingdom: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel Industries’ and Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Antidumping Duty order on Cold-Rolled Steel Flat Products from the United Kingdom,’’ dated June 16, 2021; Nucor Corporation’s Letter, ‘‘Certain Cold-Rolled Steel Flat Products from the United Kingdom: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021 (collectively, Notices of Intent to Participate). 6 See Substantive Responses. 7 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on June 1, 2021,’’ dated July 22, 2021. DEPARTMENT OF COMMERCE International Trade Administration [A–351–843, A–570–029, A–533–865, A–588– 873, A–580–881, A–412–824] Cold-Rolled Steel Flat Products From Brazil, China, India, Japan, Republic of Korea, and United Kingdom: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of these expedited sunset reviews, the Department of Commerce (Commerce) finds that revocation of the antidumping duty (AD) orders on certain cold-rolled steel flat products (cold-rolled steel) from Brazil, China, India, Japan, Republic of Korea (Korea), and the United Kingdom would be likely to lead to continuation or recurrence of dumping as indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable October 5, 2021. FOR FURTHER INFORMATION CONTACT : Reginald Anadio, Abdul Alnoor, or Thomas Hanna, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–2000, (202) 482–4554, or (202) 482–0835, respectively. SUPPLEMENTARY INFORMATION : Background On July 14 and September 20, 2016, Commerce published in the Federal Register the China and Japan Orders and the Brazil, India, Korea, and United Kingdom Orders, respectively (collectively, Orders).1 On June 1, 2021, Commerce published the notice of initiation of the sunset reviews of the Orders pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). 2 In accordance with 19 CFR 351.218(d)(1)(i) and (ii), Commerce received notices of intent to participate in these sunset reviews from Cleveland- Cliffs Inc.,3 Nucor Corporation, California Steel Industries, 4 Steel Dynamics Inc., and United States Steel Corporation (collectively, the domestic interested parties) within 15 days after the date of publication of the Initiation Notice.5 The domestic interested parties claimed interested party status under section 771(9)(C) of the Act. Commerce received adequate substantive responses to the Initiation Notice from the domestic interested parties within the 30-day period specified in 19 CFR 351.218(d)(3)(i).6 Commerce did not receive a substantive response from any respondent interested party and no hearing was requested. On July 22, 2021, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from any respondent interested party. 7 VerDate Sep<11>2014 18:56 Oct 04, 2021 Jkt 256001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\05OCN1.SGM 05OCN1 lotter on DSK11XQN23PROD with NOTICES1 54925Federal Register / Vol. 86, No. 190 / Tuesday, October 5, 2021 / Notices 8 See Memorandum, ‘‘Issues and Decision Memorandum for the Expedited Sunset Reviews of the Antidumping Duty Orders on Cold-Rolled Steel Flat Products from Brazil, China, India, Japan, South Korea, and United Kingdom,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 9 As discussed in the accompanying Issues and Decision Memorandum, a result of the changed circumstances review, Commerce modified the scope of the order on cold-rolled steel from Japan to specify an exclusion on certain cold-rolled steel from Japan. See Certain Cold-Rolled Steel Flat Products From Japan: Final Results of Changed Circumstances Review, and Revocation of Antidumping Duty Order, in Part, 82 FR 12337 (March 2, 2017); see also Issues and Decision Memorandum. 10 See Issues and Decision Memorandum. In accordance with section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted expedited, i.e., 120-day, sunset reviews of the Orders. Scope of the Orders: Brazil, India, Korea, the United Kingdom, and China The products covered by the orders on cold-rolled steel from Brazil, India, Korea, the United Kingdom, and China are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the orders on cold-rolled steel from Brazil, India, Korea, the United Kingdom, and China may also enter under the following HTSUS subheadings: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings are provided for convenience and customs purposes. A full description of the scope of the orders on cold-rolled steel from Brazil, India, Korea, the United Kingdom, and China is contained in the Issues and Decision Memorandum. 8 The written description is dispositive. Scope of the Order: Japan 9 The products covered by the order on cold-rolled steel from Japan are currently classified in the HTSUS under subheadings: 7209.15.0000, 7209.16.0030, 7209.16.0040, 7209.16.0045, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0040, 7209.17.0045, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the order on cold-rolled steel from Japan may also enter under the following HTSUS subheadings: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings are provided for convenience and customs purposes. A full description of the scope of the order on cold-rolled steel from Japan is contained in the Issues and Decision Memorandum. 10 The written description is dispositive. Analysis of Comments Received All issues raised in this review are addressed in the Issues and Decision Memorandum, including the likelihood of continuation or recurrence of dumping in the event of revocation and the magnitude of dumping margins likely to prevail if the order was revoked. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in the Issues and Decision Memorandum, which is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be found at http://enforcement.trade.gov/frn/ index.html. Final Results of Sunset Review Pursuant to sections 751(c) and 752(c) of the Act, Commerce determines that revocation of the Orders would be likely to lead to continuation or recurrence of dumping and the magnitude of the margins of dumping likely to prevail would be weighted-average margins up to the following percentages: Country Weighted- average margin (percent) Brazil ........................................... 35.43 China .......................................... 265.79 India ............................................ 7.60 Japan .......................................... 71.35 Korea .......................................... 28.42 United Kingdom .......................... 25.17 Notification Regarding Administrative Protective Orders This notice serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely written notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties Commerce is issuing and publishing these final results and notice in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act and 19 CFR 351.221(c)(5)(ii). VerDate Sep<11>2014 18:56 Oct 04, 2021 Jkt 256001 PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 E:\FR\FM\05OCN1.SGM 05OCN1 lotter on DSK11XQN23PROD with NOTICES1 54926 Federal Register / Vol. 86, No. 190 / Tuesday, October 5, 2021 / Notices 1 See Petitioner’s Letter, ‘‘Request for Administrative Review,’’ dated September 30, 2020. 2 See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 85 FR 68840 (October 30, 2020). 3 See Petitioner’s Letter, ‘‘Partial Withdrawal of Request for Administrative Review,’’ dated January 28, 2021. 4 See Memorandum, ‘‘Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from the Republic of Turkey: Extension of Deadline for Preliminary Results of Countervailing Duty Administrative Review; 2019,’’ dated May 18, 2021. 5 See Memorandum, ‘‘Decision Memorandum for the Preliminary Results: Administrative Review of the Countervailing Duty Order on Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from the Republic of Turkey; 2019,’’ dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum). 6 See sections 771(5)(B) and (D) of the Act regarding financial contribution; section 771(5)(E) of the Act regarding benefit; and section 771(5A) of the Act regarding specificity. 7 See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 85 FR 68840 (Oct. 30, 2020). 8 See Petitioner’s Letter, ‘‘Partial Withdrawal of Request for Administrative Review,’’ dated January 28, 2021. Dated: September 29, 2021. Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Orders IV. History of the Orders V. Legal Framework VI. Discussion of the Issues VII. Final Results of Expedited Sunset Reviews VIII. Recommendation [FR Doc. 2021–21658 Filed 10–4–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–489–825] Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Turkey: Preliminary Results and Rescission in Part of Countervailing Duty Administrative Review; 2019 AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : The Department of Commerce (Commerce) is conducting an administrative review of the countervailing duty (CVD) order on heavy walled rectangular welded carbon steel pipes and tubes (HWR pipes and tubes) from the Republic of Turkey (Turkey) for the period January 1, 2019, through December 31, 2019. Commerce preliminarily determines that Ozdemir Boru Profil San. Ve Tic. Ltd. Sti. (Ozdemir), the sole producer/exporter of HWR pipes and tubes from Turkey subject to this review, received de minimis countervailable subsidies. In addition, we are also rescinding this review with regard to eight companies for which the request for review was timely withdrawn by Nucor Tubular Products Inc. (the petitioner). DATES : Applicable October 5, 2021. FOR FURTHER INFORMATION CONTACT : Janae Martin or Jaron Moore, AD/CVD Operations, Office VIII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0238 or (202) 482–3640, respectively. SUPPLEMENTARY INFORMATION : Background On September 30, 2020, Commerce received a timely request for an administrative review of several companies from the petitioner, in accordance with section 751(a) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.213(b). 1 Commerce received no other requests for administrative review of these companies. On October 30, 2020, Commerce published a notice of initiation of an administrative review of the CVD order on HWR pipes and tubes from Turkey. 2 On January 28, 2021, the petitioner timely withdrew its request for an administrative review with respect to the following eight companies: Agir Haddecilik A.S., Cag Celik Demir ve Celik Endustri A.S., Cinar Boru Profil San Ve Tic. A.S., Mescier Dis Ticaret Ltd. Sti., MTS Lojistik ve Tasimacilik Hizmetleri TIC A.C. Istanbul, Noksel Celik Boru Sanayi A, SEBA Dis Ticaret AS., and Tosyali Toyo Celik A.S.3 As a result, the only company for which the request for review was not withdrawn is Ozdemir. On May 18, 2021, Commerce extended the deadline for the preliminary results to September 30, 2021. 4 For a complete description of the events that followed the initiation of this review, see the Preliminary Decision Memorandum. 5 A list of topics discussed in the Preliminary Decision Memorandum is included as an appendix to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http:// access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. Scope of the Order The merchandise covered by the order is HWR pipes and tubes from Turkey. For a complete description of the scope of the order, see the Preliminary Decision Memorandum. Methodology Commerce is conducting this review in accordance with section 751(a)(1)(A) of the Act. For each of the subsidy programs found countervailable, we preliminarily determine that there is a subsidy, i.e., a government financial contribution that gives rise to a benefit to the recipient, and that the subsidy is specific.6 For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum. Rescission of Administrative Review, in Part Pursuant to 19 CFR 351.213(d)(1), Commerce will rescind an administrative review, in whole or in part, if the party that requested a review withdraws the request within 90 days of the publication date of the notice of initiation of the requested review. On October 30, 2020, Commerce published the notice of initiation of the requested review in the Federal Register.7 The petitioner’s withdrawal request was timely submitted,8 and no other interested party requested an administrative review of the eight companies named above. Therefore, in accordance with 19 CFR 351.213(d)(1), we are rescinding this administrative review of the CVD order on HWR pipes and tubes from Turkey, in part, with respect to the aforementioned eight companies. Preliminary Results of Review Commerce preliminarily determines that the following countervailable subsidy rate exists for Ozdemir for the period January 1, 2019, through December 31, 2019: VerDate Sep<11>2014 18:56 Oct 04, 2021 Jkt 256001 PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 E:\FR\FM\05OCN1.SGM 05OCN1 lotter on DSK11XQN23PROD with NOTICES1 ──────────────────────────────────────────────────────────── === Final Results - CVD - Brazil === 77Federal Register / Vol. 87, No. 1 / Monday, January 3, 2022 / Notices 1 See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID–19, 85 FR 41363 (July 10, 2020). 2 See 19 CFR 351.218(d)(1)(iii). 1 See Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (Order). 2 See Initiation of Five-Year (Sunset) Reviews, 86 FR 29239 (June 1, 2021) (Initiation Notice). 3 See Cleveland-Cliffs Inc.’s Letter, ‘‘Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; Nucor Corporation’s Letter, ‘‘Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021; United States Steel Corporation’s Letter, ‘‘Notice of Intent to Participate,’’ dated June 16, 2021; Steel Dynamic Inc.’s Letter, ‘‘Notice of Intent to Participate,’’ dated June 16, 2021. Filing Information As a courtesy, we are making information related to sunset proceedings, including copies of the pertinent statute and Commerce’s regulations, Commerce’s schedule for Sunset Reviews, a listing of past revocations and continuations, and current service lists, available to the public on Commerce’s website at the following address: https://enforcement. trade.gov/sunset/. All submissions in these Sunset Reviews must be filed in accordance with Commerce’s regulations regarding format, translation, and service of documents. These rules, including electronic filing requirements via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), can be found at 19 CFR 351.303. In accordance with section 782(b) of the Act, any party submitting factual information in an AD/CVD proceeding must certify to the accuracy and completeness of that information. Parties must use the certification formats provided in 19 CFR 351.303(g). Commerce intends to reject factual submissions if the submitting party does not comply with applicable revised certification requirements. Letters of Appearance and Administrative Protective Orders Pursuant to 19 CFR 351.103(d), Commerce will maintain and make available a public service list for these proceedings. Parties wishing to participate in any of these five-year reviews must file letters of appearance as discussed at 19 CFR 351.103(d). To facilitate the timely preparation of the public service list, it is requested that those seeking recognition as interested parties to a proceeding submit an entry of appearance within 10 days of the publication of the Notice of Initiation. Because deadlines in Sunset Reviews can be very short, we urge interested parties who want access to proprietary information under administrative protective order (APO) to file an APO application immediately following publication in the Federal Register of this notice of initiation. Commerce’s regulations on submission of proprietary information and eligibility to receive access to business proprietary information under APO can be found at 19 CFR 351.304–306. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.1 Information Required From Interested Parties Domestic interested parties, as defined in section 771(9)(C), (D), (E), (F), and (G) of the Act and 19 CFR 351.102(b), wishing to participate in a Sunset Review must respond not later than 15 days after the date of publication in the Federal Register of this notice of initiation by filing a notice of intent to participate. The required contents of the notice of intent to participate are set forth at 19 CFR 351.218(d)(1)(ii). In accordance with Commerce’s regulations, if we do not receive a notice of intent to participate from at least one domestic interested party by the 15-day deadline, Commerce will automatically revoke the order without further review. 2 If we receive an order-specific notice of intent to participate from a domestic interested party, Commerce’s regulations provide that all parties wishing to participate in a Sunset Review must file complete substantive responses not later than 30 days after the date of publication in the Federal Register of this notice of initiation. The required contents of a substantive response, on an order-specific basis, are set forth at 19 CFR 351.218(d)(3). Note that certain information requirements differ for respondent and domestic parties. Also, note that Commerce’s information requirements are distinct from the ITC ’s information requirements. Consult Commerce’s regulations for information regarding Commerce’s conduct of Sunset Reviews. Consult Commerce’s regulations at 19 CFR part 351 for definitions of terms and for other general information concerning antidumping and countervailing duty proceedings at Commerce. This notice of initiation is being published in accordance with section 751(c) of the Act and 19 CFR 351.218(c). Dated: December 14, 2021. James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2021–28405 Filed 12–30–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–351–844] Certain Cold-Rolled Steel Flat Products of Brazil: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of this expedited sunset review, the Department of Commerce (Commerce) finds that revocation of the countervailing duty (CVD) order on certain cold-rolled steel flat products (CRS) from Brazil would be likely to lead to continuation or recurrence of countervailable subsidies at the levels as indicated in the ‘‘Final Results of Sunset Review’’ section of this notice. DATES : Applicable January 3, 2022. FOR FURTHER INFORMATION CONTACT : Alex Wood or Steven Seifert, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–1959 or (202) 482–3350, respectively. SUPPLEMENTARY INFORMATION : Background On September 20, 2016, Commerce published in the Federal Register a notice of the CVD order on CRS from Brazil. 1 On June 1, 2021, Commerce published the notice of initiation of the first five-year (sunset) review of the Order, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). 2 Commerce received notices of intent to participate from Cleveland- Cliffs Inc., Nucor Corporation, Steel Dynamics Inc., and United States Steel Corporation (collectively, domestic interested parties) within the deadline specified in 19 CFR 351.218(d)(1)(i). 3 VerDate Sep<11>2014 17:14 Dec 30, 2021 Jkt 256001 PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 E:\FR\FM\03JAN1.SGM 03JAN1 khammond on DSKJM1Z7X2PROD with NOTICES 78 Federal Register / Vol. 87, No. 1 / Monday, January 3, 2022 / Notices 4 See id. 5 See Domestic Interested Parties’ Letter, ‘‘Domestic Industry’s Substantive Response to Notice of Initiation,’’ dated July 1, 2021. 6 See GOB’s Letter, ‘‘Initial Comments,’’ dated August 31, 2021. The GOB initially filed its comments on June 30, 2021, but we subsequently requested that the GOB revise the bracketing of certain information in its submission and refile it. See Commerce’s Letter, ‘‘Five-Year (‘‘Sunset’’) Review of Cold-Rolled Steel Flat Products from Brazil: Rejection of Response to Notice of Initiation,’’ dated August 25, 2021. 7 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on June 1, 2021,’’ dated July 22, 2021. 8 See Memorandum, ‘‘Meeting with Government of Brazil,’’ dated September 7, 2021. 9 For a complete description of the scope of the Order, see Memorandum, ‘‘Issues and Decision Memorandum for the Final Results of the First Sunset Review of the Countervailing Duty Order on Certain Hot-Rolled Steel Flat Products from Brazil,’’ dated concurrently with, and herby adopted by, this notice (Issues and Decision Memorandum). The domestic interested parties claimed interested party status under section 771(9)(C) of the Act as manufacturers or producers of the domestic like product.4 On July 1, 2021, Commerce received an adequate substantive response to the Initiation Notice from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).5 Commerce also received a response from the Government of Brazil (GOB). 6 However, we did not receive a substantive response from any other interested party in this proceeding. On July 22, 2021, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties. 7 As a result, Commerce conducted an expedited (120-day) sunset review of the Order. On September 1, 2021, officials from Commerce and the GOB met to discuss certain procedural aspects of the expedited sunset review on CRS from Brazil. 8 Scope of the Order The products covered by this order are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products subject to this order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to this order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the order is dispositive. 9 Analysis of Comments Received A complete discussion of all issues raised in this sunset review, including the likelihood of continuation or recurrence of subsidization in the event of revocation of the Order and the countervailable subsidy rates likely to prevail if the Order were to be revoked, is provided in the Issues and Decision Memorandum. A list of the topics discussed in the Issues and Decision Memorandum is attached as an appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. Final Results of Sunset Review Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Order would be likely to lead to continuation or recurrence of countervailable subsidies at the following rates: Manufacturer/producer/exporter Net countervailable subsidy (percent) Companhia Siderurgica Nacional (CSN) ........................................... 11.31 Usinas Siderurgicas de Minas Gerais S.A. (Usiminas) ................ 11.09 All Others ........................................ 11.20 Administrative Protective Order This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation. Notification to Interested Parties Commerce is issuing and publishing these final results and notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act. Dated: December 27, 2021. Ryan Majerus, Deputy Assistant Secretary for Policy and Negotiations, Performing the Non-Exclusive Functions and Duties of the Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. History of the Order V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Rates Likely to Prevail 3. Nature of the Subsidiesy VII. Final Results of the Sunset Review VIII. Recommendation [FR Doc. 2021–28402 Filed 12–30–21; 8:45 am] BILLING CODE 3510–DS–P VerDate Sep<11>2014 17:14 Dec 30, 2021 Jkt 256001 PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 E:\FR\FM\03JAN1.SGM 03JAN1 khammond on DSKJM1Z7X2PROD with NOTICES ──────────────────────────────────────────────────────────── === Final Results - CVD - China - South Korea === 54677Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Notices 1 See Certain Cold-Rolled Steel Flat Products from the People’s Republic of China: Countervailing Duty Order, 81 FR 45960 (July 14, 2016); and Certain Cold-Rolled Steel Flat Products from Brazil, India, and the Republic of Korea: Amended Final Affirmative Countervailing Duty Determination and Countervailing Duty Order (the Republic of Korea) and Countervailing Duty Orders (Brazil and India), 81 FR 64436 (September 20, 2016) (collectively, the Orders). 2 See Initiation of Five-Year (Sunset) Review, 86 FR 29239 (June 1, 2021). 3 See Cleveland-Cliffs Inc.’s Letter, ‘‘Five-Year (‘Sunset’) Review Of Countervailing Duty Order on ColdRolled Steel Flat Products from China: Notice Continued 800–877–8339 and providing the Service with the conference call number and conference ID number. Members of the public are also entitled to submit written comments; the comments must be received in the regional office within 30 days following the meeting. Written comments may be emailed to Liliana Schiller at lschiller@ usccr.gov. Persons who desire additional information may contact the Regional Programs Unit at (312) 353– 8311. Records generated from this meeting may be inspected and reproduced at the Regional Programs Unit Office, as they become available, both before and after the meeting. Records of the meeting will be available via www.facadatabase.gov under the Commission on Civil Rights, North Carolina Advisory Committee link. Persons interested in the work of this Committee are directed to the Commission’s website, http:// www.usccr.gov, or may contact the Regional Programs Unit at the above email or street address. Agenda 1. Roll Call 2. Discussion 3. Next Steps 4. Public Comment 5. Adjourn Dated: Tuesday, September 28, 2021. David Mussatt, Supervisory Chief, Regional Programs Unit. [FR Doc. 2021–21453 Filed 10–1–21; 8:45 am] BILLING CODE P COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the South Dakota Advisory Committee AGENCY : U.S. Commission on Civil Rights. ACTION : Announcement of public meeting. SUMMARY : Notice is hereby given, pursuant to the provisions of the rules and regulations of the U.S. Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that the South Dakota State Advisory Committee to the Commission will convene a meeting on Monday, November 8, 2021, at 3:30 p.m. (CT). The purpose of the meeting is to review project topics for study and potentially vote on a new project topic. DATES : Monday, November 8, 2021, at 3:30 p.m. (CT). Public Web Conference Registration Link (video and audio): https://bit.ly/ 3AnTnxv; password, if needed: USCCR. If Joining by Phone Only, Dial: 1–800– 360–9505; access code: 2762 840 3606#. FOR FURTHER INFORMATION CONTACT : Mallory Trachtenberg at mtrachtenberg@usccr.gov or by phone at (202) 809–9618. SUPPLEMENTARY INFORMATION : The meeting is available to the public through the web link above. If joining only via phone, callers can expect to incur charges for calls they initiate over wireless lines, and the Commission will not refund any incurred charges. Individuals who are deaf, deafblind and hard of hearing may also follow the proceedings by first calling the Federal Relay Service at 1–800–877–8339 and providing the Service with conference details found through registering at the web link above. To request other accommodations, please email mtrachtenberg@usccr.gov at least 7 days prior to the meeting for which accommodations are requested. Members of the public are entitled to make comments during the open period at the end of the meeting. Members of the public may also submit written comments; the comments must be received in the Regional Programs Unit within 30 days following the meeting. Written comments may be emailed to Mallory Trachtenberg at mtrachtenberg@usccr.gov. Persons who desire additional information may contact the Regional Programs Unit at (202) 809–9618. Records and documents discussed during the meeting will be available for public viewing as they become available at www.facadatabase.gov. Persons interested in the work of this advisory committee are advised to go to the Commission’s website, www.usccr.gov, or to contact the Regional Programs Unit at the above phone number or email address. Agenda: Monday, November 8, 2021, from 3:30 p.m. (CT) I. Welcome and Roll Call II. Announcements and Updates III. Approval of Minutes IV. Planning Meeting: Project Topics Discussion and Potential Vote V. Public Comment VI. Next Steps VII. Adjournment Dated: September 29, 2021. David Mussatt, Supervisory Chief, Regional Programs Unit. [FR Doc. 2021–21532 Filed 10–1–21; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE International Trade Administration [C–570–030; C–580–882] Certain Cold-Rolled Steel Flat Products From the People’s Republic of China and the Republic of Korea: Final Results of the Expedited First Sunset Reviews of the Countervailing Duty Orders AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY : As a result of these expedited sunset reviews, the Department of Commerce (Commerce) finds that revocation of the countervailing duty orders on certain cold-rolled steel flat products (cold-rolled steel) from the People’s Republic of China (China) and the Republic of Korea (Korea) would be likely to lead to continuation or recurrence of countervailable subsidies at the levels as indicated in the ‘‘Final Results of Sunset Reviews’’ section of this notice. DATES : Applicable October 4, 2021. FOR FURTHER INFORMATION CONTACT : Tyler Weinhold or Harrison Tanchuck, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3362 and (202) 482–7421 respectively. SUPPLEMENTARY INFORMATION : Background On June 1, 2021, Commerce published the notice of initiation of the first sunset reviews of the Orders,1 pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). 2 Commerce received a notice of intent to participate from Cleveland-Cliffs Inc., California Steel Industries and Steel Dynamics Inc., Nucor Corporation, and United States Steel Corporation (collectively, domestic interested parties) within the deadline specified in 19 CFR 351.218(d)(1)(i). 3 Each claimed VerDate Sep<11>2014 22:52 Oct 01, 2021 Jkt 256001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\04OCN1.SGM 04OCN1 54678 Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Notices of Intent to Participate in Sunset Review,’’ dated June 14, 2021; see also California Steel Industries and Steel Dynamics Inc.’s Letter, ‘‘Certain Cold- Rolled Steel Flat Products from the Republic of Korea: Notice of Intent to Participate in Sunset Notice of Intent to Participate in the First Five-Year Review of the Countervailing Duty Order on Cold- Rolled Steel Flat Products from the People’s Republic of China,’’ dated June 16, 2021; Cleveland- Cliffs Inc.’s Letter, ‘‘Five-Year (‘Sunset’) Review of Countervailing Duty Order on Cold Rolled Steel Flat Products from the Republic of Korea: Notice of Intent to Participate in Sunset Review,’’ dated June 14, 2021; U.S. Steel’s Letter, ‘‘Five-Year (‘Sunset’) Review of Antidumping and Countervailing Duty Orders on Cold-Rolled Steel Flat Products from South Korea: Notice of Intent to Participate,’’ dated June 16, 2021; California Steel Industries and Steel Dynamics Inc.’s Letter, ‘‘Notice of Intent to Participate in the First Five-Year Review of the Countervailing Duty Order on Cold-Rolled Steel Flat Products from the Republic of Korea,’’ dated June 16, 2021; and Nucor Corporation’s Letter ‘‘Certain Cold-Rolled Steel Flat Products from the Republic of Korea: Notice of Intent to Participate in Sunset Review,’’ dated June 16, 2021. 4 See Domestic Interested Parties’ Letters, ‘‘Cold- Rolled Steel Flat Products from the People’s Republic of China: Substantive Response of the Domestic Interested Parties to Commerce’s Notice of Initiation of Five-Year (‘Sunset’) Reviews,’’ dated July 1, 2021; and ‘‘Cold-Rolled Steel Flat Products from the Republic of Korea: Substantive Response to Notice of Initiation of Sunset Review,’’ dated July 1, 2021. 5 See Commerce’s Letter, ‘‘Sunset Reviews Initiated on June 1, 2021,’’ dated June 1, 2021. 6 See Memorandum, ‘‘Issues and Decision Memorandum for the Expedited First Sunset Review of the Countervailing Duty Orders of Certain Cold-Rolled Steel Flat Products from the People’s Republic of China and the Republic of Korea,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 7 Id. interested party status under section 771(9)(C) of the Act as domestic producers engaged in the production in the United States of cold-rolled steel. Commerce received a substantive response from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).4 We did not receive a substantive response from any other interested party in these proceedings, and no party requested a hearing. On July 22, 2021, Commerce notified the U.S. International Trade Commission that it did not receive an adequate substantive response from respondent interested parties. 5 As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted expedited (120-day) sunset reviews of these Orders. Scope of the Orders The products covered by these Orders are certain cold-rolled (cold-reduced), flat-rolled steel products. For a complete description of the scope of this order, see the Issues and Decision Memorandum.6 Analysis of Comments Received All issues raised in these sunset reviews are addressed in the Issues and Decision Memorandum, including the likelihood of continuation or recurrence of countervailable subsidies and the net countervailable subsidy likely to prevail if the Orders were revoked. 7 The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Services System (ACCESS). ACCESS is available to registered users at http:// access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://enforcement.trade.gov/frn/ index.html. Final Results of Sunset Reviews Pursuant to sections 751(c)(1) and 752(b) of the Act, Commerce determines that revocation of the Orders would be likely to lead to the continuation or recurrence of countervailable subsidies at the following rates: Manufacturer/producer/ exporter Subsidy rate (percent) Cold-Rolled Steel From China Angang Group Hong Kong Co., Ltd ............................. 256.44 Benxi Iron and Steel (Group) Special Steel Co., Ltd ....... 256.44 Qian’an Golden Point Trad- ing Co., Ltd ....................... 256.44 All Others .............................. 256.44 Cold-Rolled Steel From Korea Hyundai Steel Co., Ltd ......... 4.04 POSCO ................................. 51.80 All Others .............................. 13.19 Administrative Protective Order This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a). Timely written notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. Notification to Interested Parties We are issuing and publishing this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act. Dated: September 28, 2021. Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Orders IV. History of the Orders V. Legal Framework VI. Discussion of the Issues 1. Likelihood of Continuation or Recurrence of a Countervailable Subsidy 2. Net Countervailable Subsidy Rates Likely To Prevail 3. Nature of the Subsidies VII. Final Results of Review VIII. Recommendation [FR Doc. 2021–21563 Filed 10–1–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Advance Notification of Sunset Review AGENCY : Enforcement and Compliance, International Trade Administration, Department of Commerce. Background Every five years, pursuant to the Tariff Act of 1930, as amended (the Act), the Department of Commerce (Commerce) and the International Trade Commission automatically initiate and conduct reviews to determine whether revocation of a countervailing or antidumping duty order or termination of an investigation suspended under section 704 or 734 of the Act would be likely to lead to continuation or recurrence of dumping or a countervailable subsidy (as the case may be) and of material injury. Upcoming Sunset Reviews for November 2021 Pursuant to section 751(c) of the Act, the following Sunset Reviews are scheduled for initiation in November 2021 and will appear in that month’s Notice of Initiation of Five-Year Sunset Reviews (Sunset Review). VerDate Sep<11>2014 22:52 Oct 01, 2021 Jkt 256001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\04OCN1.SGM 04OCN1