CSMS 8004302·Trade policy·January 4, 2018·View on csms.cbp.gov ↗

Antidumping duty order and amended final determination on certain softwood lumber products from Canada (A-122-857)

Plain-English explanation

CSMS 8004302 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin (trade policy), published on January 4, 2018. It carries the official CBP guidance brokers and importers must follow for the topic — "Antidumping duty order and amended final determination on certain softwood lumber products from Canada (A-122-857)". It links to 1 AD/CVD case in Tandom's catalog. CSMS messages are the operational layer between Commerce determinations and at-the-border collections: when Commerce publishes a new rate, scope ruling, or instruction, CBP turns it into a CSMS that ACE/ACS systems and brokers act on.

Linked AD/CVD cases(1)

Cases referenced or affected by this CSMS message

A-122-857

Message body

Full text as published by U.S. Customs and Border Protection

1. On 1/3/2018, Commerce published in the Federal Register its antidumping duty order and amended final determination on certain softwood lumber products from Canada (83 FR 350). This message amends certain instructions pertaining to the final determination in this proceeding. See message 7321302, dated 11/17/2017. 2. The merchandise covered by this order is softwood lumber, siding, flooring and certain other coniferous wood (softwood lumber products). The scope includes: • Coniferous wood, sawn, or chipped lengthwise, sliced or peeled, whether or not planed, whether or not sanded, or whether or not finger-jointed, of an actual thickness exceeding six millimeters. • Coniferous wood siding, flooring, and other coniferous wood (other than moldings and dowel rods), including strips and friezes for parquet flooring, that is continuously shaped (including, but not limited to, tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded) along any of its edges, ends, or faces, whether or not planed, whether or not sanded, or whether or not end-jointed. • Coniferous drilled and notched lumber and angle cut lumber. • Coniferous lumber stacked on edge and fastened together with nails, whether or not with plywood sheathing. • Components or parts of semi-finished or unassembled finished products made from subject merchandise that would otherwise meet the definition of the scope above. Finished products are not covered by the scope of this investigation. For the purposes of this scope, finished products contain, or are comprised of, subject merchandise and have undergone sufficient processing such that they can no longer be considered intermediate products, and such products can be readily differentiated from merchandise subject to this investigation at the time of importation. Such differentiation may, for example, be shown through marks of special adaptation as a particular product. The following products are illustrative of the type of merchandise that is considered “finished,” for the purpose of this scope: I-joists; assembled pallets; cutting boards; assembled picture frames; garage doors. The following items are excluded from the scope of this investigation: • Softwood lumber products certified by the Atlantic Lumber Board as being first produced in the Provinces of Newfoundland and Labrador, Nova Scotia, or Prince Edward Island from logs harvested in Newfoundland and Labrador, Nova Scotia, or Prince Edward Island. • U.S.-origin lumber shipped to Canada for processing and imported into the United States if the processing occurring in Canada is limited to one or more of the following: (1) Kiln drying; (2) planing to create smooth-to-size board; or (3) sanding. • Box-spring frame kits if they contain the following wooden pieces – two side rails, two end (or top) rails and varying numbers of slats. The side rails and the end rails must be radius-cut at both ends. The kits must be individually packaged and must contain the exact number of wooden components needed to make a particular box-spring frame, with no further processing required. None of the components exceeds 1” in actual thickness or 83” in length. • Radius-cut box-spring-frame components, not exceeding 1” in actual thickness or 83” in length, ready for assembly without further processing. The radius cuts must be present on both ends of the boards and must be substantially cut so as to completely round one corner. Softwood lumber product imports are generally entered under Chapter 44 of the Harmonized Tariff Schedule of the United States (HTSUS). This chapter of the HTSUS covers “Wood and articles of wood.” Softwood lumber products that are subject to this investigation are currently classifiable under the following ten-digit HTSUS subheadings in Chapter 44: 4407.10.01.01; 4407.10.01.02; 4407.10.01.15; 4407.10.01.16; 4407.10.01.17; 4407.10.01.18; 4407.10.01.19; 4407.10.01.20; 4407.10.01.42; 4407.10.01.43; 4407.10.01.44; 4407.10.01.45; 4407.10.01.46; 4407.10.01.47; 4407.10.01.48; 4407.10.01.49; 4407.10.01.52; 4407.10.01.53; 4407.10.01.54; 4407.10.01.55; 4407.10.01.56; 4407.10.01.57; 4407.10.01.58; 4407.10.01.59; 4407.10.01.64; 4407.10.01.65; 4407.10.01.66; 4407.10.01.67; 4407.10.01.68; 4407.10.01.69; 4407.10.01.74; 4407.10.01.75; 4407.10.01.76; 4407.10.01.77; 4407.10.01.82; 4407.10.01.83; 4407.10.01.92; 4407.10.01.93; 4409.10.05.00; 4409.10.10.20; 4409.10.10.40; 4409.10.10.60; 4409.10.10.80; 4409.10.20.00; 4409.10.90.20; 4409.10.90.40; and 4418.99.10.00. Subject merchandise as described above might be identified on entry documentation as stringers, square cut box-spring-frame components, fence pickets, truss components, pallet components, flooring, and door and window frame parts. Items so identified might be entered under the following ten-digit HTSUS subheadings in Chapter 44: 4415.20.40.00; 4415.20.80.00; 4418.99.90.05; 4418.99.90.20; 4418.99.90.40; 4418.99.90.95; 4421.99.70.40; and 4421.99.97.80. Although these HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive. 3. For imports of certain softwood lumber products from Canada, CBP shall suspend liquidation of entries of subject merchandise entered, or withdrawn from warehouse, for consumption on or after 12/28/2017 (date of publication of the International Trade Commission final determination in the Federal Register). Effective 12/28/2017, CBP shall require a cash deposit equal to the percentages identified below. All Others Case Number: A-122-857-000 Cash Deposit Rate: 6.04% Producer and/or Exporter: Canfor Corporation Case number: A-122-857-001 Cash deposit rate: 7.28% Producer and/or Exporter: Resolute FP Canada Inc. Case number: A-122-857-002 Cash deposit rate: 3.20% Producer and/or Exporter: Tolko Industries Ltd. and Tolko Marketing & Services, Ltd. Case number: A-122-857-003 Cash deposit rate: 7.22% Producer and/or Exporter: West Fraser Mills Ltd. Case number: A-122-857-004 Cash deposit rate: 5.57% 4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OIV: SMB) 5. There are no restrictions on the release of this information. Alexander Amdur

Frequently asked questions

What is CSMS 8004302?

CSMS 8004302 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin titled "Antidumping duty order and amended final determination on certain softwood lumber products from Canada (A-122-857)". CSMS bulletins are the operational instructions CBP issues to brokers, importers, and ACE filers covering rate changes, system updates, scope guidance, and other day-to-day customs-operations changes.

When was CSMS 8004302 published?

CBP published CSMS 8004302 on January 4, 2018. The bulletin's instructions are typically operative as of the publication date unless the body specifies a different effective date.

Which AD/CVD cases does CSMS 8004302 affect?

CSMS 8004302 references 1 AD/CVD case (A-122-857). The links on this page take you to each linked order with its current scope, rates, and history.

Is the CBP CSMS the legally binding instruction?

Learn more

Tandom guides relevant to CBP CSMS messages

Trade compliance APIs in broker workflows

Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.

Open resource

Find the right manufacturer or exporter rate in an AD/CVD order

Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.