CSMS 7320306·Trade policy·November 16, 2017·View on csms.cbp.gov ↗

Notice of preliminary determination in the antidumping duty investigation of certain tool chests and cabinets from the Socialist Republic of Vietnam (A-552-821)

Plain-English explanation

CSMS 7320306 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin (trade policy), published on November 16, 2017. It carries the official CBP guidance brokers and importers must follow for the topic — "Notice of preliminary determination in the antidumping duty investigation of certain tool chests and cabinets from the Socialist Republic of Vietnam (A-552-821)". It links to 1 AD/CVD case in Tandom's catalog. CSMS messages are the operational layer between Commerce determinations and at-the-border collections: when Commerce publishes a new rate, scope ruling, or instruction, CBP turns it into a CSMS that ACE/ACS systems and brokers act on.

Linked AD/CVD cases(1)

Cases referenced or affected by this CSMS message

A-552-821

Message body

Full text as published by U.S. Customs and Border Protection

1. On 11/16/2017, Commerce published in the Federal Register (82 FR 53452) its preliminary determination of sales at less than fair value and the postponement of the final determination in the antidumping duty investigation of certain tool chests and cabinets from the Socialist Republic of Vietnam (Vietnam). 2. The products covered by this investigation are described as follows: The scope of this investigation covers certain metal tool chests and tool cabinets, with drawers, (tool chests and cabinets), from Vietnam. The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics: (1) a body made of carbon, alloy, or stainless steel and/or other metals; (2) two or more drawers for storage in each individual unit; (3) a width (side to side) exceeding 15 inches for side cabinets and exceeding 21 inches for all other individual units but not exceeding 60 inches; (4) a body depth (front to back) exceeding 10 inches but not exceeding 24 inches; and (5) prepackaged for retail sale. For purposes of this scope, the width parameter applies to each individual unit, i.e., each individual top chest, intermediate top chest, tool cabinet, side cabinet, storage unit, mobile work bench, and work station. Prepackaged for retail sale means the units may, for example, be packaged in a cardboard box, other type of container or packaging, and may bear a Universal Product Code, along with photographs, pictures, images, features, artwork, and/or product specifications. Subject tool chests and cabinets are covered whether imported in assembled or unassembled form. Subject merchandise includes tool chests and cabinets produced in Vietnam but assembled, prepackaged for retail sale, or subject to other minor processing in a third country prior to importation into the United States. Similarly, it would include tool chests and cabinets produced in Vietnam that are later found to be assembled, prepackaged for retail sale, or subject to other minor processing after importation into the United States. Subject tool chests and cabinets may also have doors and shelves in addition to drawers, may have handles (typically mounted on the sides), and may have a work surface on the top. Subject tool chests and cabinets may be uncoated (e.g., stainless steel), painted, powder coated, galvanized, or otherwise coated for corrosion protection or aesthetic appearance. Subject tool chests and cabinets may be packaged as individual units or in sets. When packaged in sets, they typically include a cabinet with one or more chests that stack on top of the cabinet. Tool cabinets act as a base tool storage unit and typically have rollers, casters, or wheels to permit them to be moved more easily when loaded with tools. Work stations and mobile work benches are tool cabinets with a work surface on the top that may be made of rubber, plastic, metal, wood, or other materials. Top chests are designed to be used with a tool cabinet to form a tool storage unit. The top chests may be mounted on top of the base tool cabinet or onto an intermediate chest. They are often packaged as a set with tool cabinets or intermediate chests, but may also be packaged separately. They may be packaged with mounting hardware (e.g., bolts) and instructions for assembling them onto the base tool cabinet or onto an intermediate tool chest which rests on the base tool cabinet. Smaller top chests typically have handles on the sides, while the larger top chests typically lack handles. Intermediate tool chests are designed to fit on top of the floor standing tool cabinet and to be used underneath the top tool chest. Although they may be packaged or used separately from the tool cabinet, intermediate chests are designed to be used in conjunction with tool cabinets. The intermediate chests typically do not have handles. The intermediate and top chests may have the capability of being bolted together. Side cabinets are designed to be bolted or otherwise attached to the side of the base storage cabinet to expand the storage capacity of the base tool cabinet. Subject tool chests and cabinets also may be packaged with a tool set included. Packaging a subject tool chest and cabinet with a tool set does not remove an otherwise covered subject tool chest and cabinet from the scope. When this occurs, the tools are not part of the subject merchandise. All tool chests and cabinets that meet the above definition are included in the scope unless otherwise specifically excluded. Excluded from the scope of the investigation are tool boxes, chests, and cabinets with bodies made of plastic, carbon fiber, wood, or other non-metallic substances. Also excluded from the scope of the investigation are industrial grade steel tool chests and cabinets. The excluded industrial grade steel tool chests and cabinets are those: (1) having a body that is over 60 inches in width; or (2) having each of the following physical characteristics: (a) a body made of steel that is 0.047 inches or more in thickness; (b) a body depth (front to back) exceeding 21 inches; and (c) a unit weight that exceeds the maximum unit weight shown below for each width range: Weight to Width Ratio Tool Chests Inches Maximum Pounds Greater than 21 and less than or equal to 25 90 Greater than 25 and less than or equal to 28 115 Greater than 28 and less than or equal to 30 120 Greater than 30 and less than or equal to 32 130 Greater than 32 and less than or equal to 34 140 Greater than 34 and less than or equal to 36 150 Greater than 36 and less than or equal to 38 160 Greater than 38 and less than or equal to 40 170 Greater than 40 and less than or equal to 42 180 Greater than 42 and less than or equal to 44 190 Greater than 44 and less than or equal to 46 200 Greater than 46 and less than or equal to 48 210 Greater than 48 and less than or equal to 50 220 Greater than 50 and less than or equal to 52 230 Greater than 52 and less than or equal to 54 240 Greater than 54 and less than or equal to 56 250 Greater than 56 and less than or equal to 58 260 Greater than 58 and less than or equal to 60 270 Weight to Width Ratio Tool Cabinets Inches Maximum Pounds Greater than 21 and less than or equal to 25 155 Greater than 25 and less than or equal to 28 170 Greater than 28 and less than or equal to 30 185 Greater than 30 and less than or equal to 32 200 Greater than 32 and less than or equal to 34 215 Greater than 34 and less than or equal to 36 230 Greater than 36 and less than or equal to 38 245 Greater than 38 and less than or equal to 40 260 Greater than 40 and less than or equal to 42 280 Greater than 42 and less than or equal to 44 290 Greater than 44 and less than or equal to 46 300 Greater than 46 and less than or equal to 48 310 Greater than 48 and less than or equal to 50 320 Greater than 50 and less than or equal to 52 330 Greater than 52 and less than or equal to 54 340 Greater than 54 and less than or equal to 56 350 Greater than 56 and less than or equal to 58 360 Greater than 58 and less than or equal to 60 370 Also excluded from the scope of the investigation are service carts. The excluded service carts have all of the following characteristics: (1) casters, wheels, or other similar devices which allow the service cart to be rolled from place to place; (2) a flat top or flat lid on top of the unit that opens; (3) a space or gap between the casters, wheels, or other similar devices, and the bottom of the enclosed storage space (e.g., drawers) of at least 10 inches; and (4) a total unit height, including casters, of less than 48 inches. Also excluded from the scope of the investigation are non-mobile work benches. The excluded non-mobile work benches have all of the following characteristics: (1) a solid top working surface; (2) no drawers, one drawer, or two drawers in a side-by-side configuration; and (3) the unit is supported by legs and has no solid front, side, or back panels enclosing the body of the unit. Also excluded from the scope of this investigation are metal filing cabinets that are configured to hold hanging file folders and are classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 9403.10.0020. Merchandise subject to this investigation is classified under HTSUS categories 9403.20.0021, 9403.20.0026, 9403.20.0030 and 7326.90.8688, but may also be classified under HTSUS category 7326.90.3500. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of this investigation is dispositive. 3. This proceeding has been assigned case number A-552-821. 4. For imports of certain tool chests and cabinets from Vietnam, CBP shall suspend liquidation of such shipments entered, or withdrawn from warehouse, for consumption on or after 11/16/2017. Effective 11/16/2017, CBP shall require, for entries of certain tool chests and cabinets from Vietnam from the exporter/producer combinations listed below, a cash deposit equal to the antidumping duty cash deposits shown below: Exporter: Vietnam-Wide Entity Case number: A-552-821-000 Cash deposit rate: 230.31% Exporter: Clearwater Metal Single Entity Producer: Clearwater Metal Single Entity Case number: A-552-821-001 Cash deposit rate: 230.31% Note: The Clearwater Metal Single Entity is comprised of Clearwater Metal VN JSC, Rabat Corporation, and CSPS Co., Ltd. 5. For all other entries of certain tool chests and cabinets from Vietnam, the following cash deposit instructions apply: A. For all Vietnamese exporters of certain tool chests and cabinets from Vietnam which have not received their own rate, the cash deposit rate will be the Vietnam-wide rate. B. For all non-Vietnamese exporters of certain tool chests and cabinets from Vietnam which have not received their own rate, the cash deposit rate will be the rate applicable to the exporter/producer combinations that supplied that non-Vietnamese exporter. 6. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OI:DV.) 7. There are no restrictions on the release of this information. Alexander Amdur

Frequently asked questions

What is CSMS 7320306?

CSMS 7320306 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin titled "Notice of preliminary determination in the antidumping duty investigation of certain tool chests and cabinets from the Socialist Republic of Vietnam (A-552-821)". CSMS bulletins are the operational instructions CBP issues to brokers, importers, and ACE filers covering rate changes, system updates, scope guidance, and other day-to-day customs-operations changes.

When was CSMS 7320306 published?

CBP published CSMS 7320306 on November 16, 2017. The bulletin's instructions are typically operative as of the publication date unless the body specifies a different effective date.

Which AD/CVD cases does CSMS 7320306 affect?

CSMS 7320306 references 1 AD/CVD case (A-552-821). The links on this page take you to each linked order with its current scope, rates, and history.

Is the CBP CSMS the legally binding instruction?

Learn more

Tandom guides relevant to CBP CSMS messages

Trade compliance APIs in broker workflows

Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.

Open resource

Find the right manufacturer or exporter rate in an AD/CVD order

Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.