CSMS 7136307·Trade policy·May 16, 2017·View on csms.cbp.gov ↗

Initiation of antidumping duty investigation of certain cold-drawn mechanical tubing of carbon and alloy steel from the Republic of Korea (A-580-892)

Plain-English explanation

CSMS 7136307 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin (trade policy), published on May 16, 2017. It carries the official CBP guidance brokers and importers must follow for the topic — "Initiation of antidumping duty investigation of certain cold-drawn mechanical tubing of carbon and alloy steel from the Republic of Korea (A-580-892)". It links to 1 AD/CVD case in Tandom's catalog. CSMS messages are the operational layer between Commerce determinations and at-the-border collections: when Commerce publishes a new rate, scope ruling, or instruction, CBP turns it into a CSMS that ACE/ACS systems and brokers act on.

Linked AD/CVD cases(1)

Cases referenced or affected by this CSMS message

A-580-892

Message body

Full text as published by U.S. Customs and Border Protection

1. On 05/16/2017, Commerce published in the Federal Register its initiation of the antidumping duty investigation of certain cold-drawn mechanical tubing of carbon and alloy steel from the Republic of Korea (Korea) (82 FR 22491). The effective date of this initiation is 05/09/2017 (the effective date as stated in the FR notice). 2. The scope of this investigation covers cold-drawn mechanical tubing of carbon and alloy steel (cold-drawn mechanical tubing) of circular cross-section, in actual outside diameters less than 331 mm, and regardless of wall thickness, surface finish, end finish or industry specification. The subject cold-drawn mechanical tubing is a tubular product with a circular cross-sectional shape that has been cold-drawn or otherwise cold-finished after the initial tube formation in a manner that involves a change in the diameter or wall thickness of the tubing, or both. The subject cold-drawn mechanical tubing may be produced from either welded (e.g., electric resistance welded, continuous welded, etc.) or seamless (e.g., pierced, pilgered or extruded, etc.) carbon or alloy steel tubular products. It may also be heat treated after cold working. Such heat treatments may include, but are not limited to, annealing, normalizing, quenching and tempering, stress relieving or finish annealing. Typical cold-drawing methods for subject merchandise include, but are not limited to, drawing over mandrel, rod drawing, plug drawing, sink drawing and similar processes that involve reducing the outside diameter of the tubing with a die or similar device, whether or not controlling the inside diameter of the tubing with an internal support device such as a mandrel, rod, plug or similar device. Subject cold-drawn mechanical tubing is typically certified to meet industry specifications for cold-drawn tubing including but not limited to: (1) American Society for Testing and Materials (ASTM) or American Society of Mechanical Engineers (ASME) specifications ASTM A-512, ASTM A-513 Type 3 (ASME SA513 Type 3), ASTM A-513 Type 4 (ASME SA513 Type 4), ASTM A-513 Type 5 (ASME SA513 Type 5), ASTM A-513 Type 6 (ASME SA513 Type 6), ASTM A-519 (cold-finished); (2) SAE International (Society of Automotive Engineers) specifications SAE J524, SAE J525, SAE J2833, SAE J2614, SAE J2467, SAE J2435, SAE J2613; (3) Aerospace Material Specification (AMS) AMS T-6736 (AMS 6736), AMS 6371, AMS 5050, AMS 5075, AMS 5062, AMS 6360, AMS 6361, AMS 6362, AMS 6371, AMS 6372, AMS 6374, AMS 6381, AMS 6415; (4) United States Military Standards (MIL) MIL-T-5066 and MIL-T-6736; (5) foreign standards equivalent to one of the previously listed ASTM, ASME, SAE, AMS or MIL specifications including but not limited to: (a) German Institute for Standardization (DIN) specifications DIN 2391-2, DIN 2393-2, DIN 2394-2); (b) European Standards (EN) EN 10305-1, EN 10305-2, EN 10305-4, EN 103056 and European national variations on those standards (e.g., British Standard (BS EN), Irish Standard (IS EN) and German Standard (DIN EN) variations, etc.); (c) Japanese Industrial Standard (JIS) JIS G 3441 and JIS G 3445; and (6) proprietary standards that are based on one of the above-listed standards. The subject cold-drawn mechanical tubing may also be dual or multiple certified to more than one standard. Pipe that is multiple certified as cold-drawn mechanical tubing and to other specifications not covered by this scope, is also covered by the scope of this investigation when it meets the physical description set forth above. Steel products included in the scope of this investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is 2 percent or less by weight. For purposes of this scope, the place of cold-drawing determines the country of origin of the subject merchandise. Subject merchandise that is subject to minor working in a third country that occurs after drawing in one of the subject countries including, but not limited to, heat treatment, cutting to length, straightening, nondestruction testing, deburring or chamfering, remains within the scope of the investigation. All products that meet the written physical description are within the scope of this investigation unless specifically excluded or covered by the scope of an existing order. Merchandise that meets the physical description of cold-drawn mechanical tubing above is within the scope of the investigation even if it is also dual or multiple certified to an otherwise excluded specification listed below. The following products are outside of, and/or specifically excluded from, the scope of this investigation: (1) cold-drawn stainless steel tubing, containing 10.5 percent or more of chromium by weight and not more than 1.2 percent of carbon by weight; (2) products certified to one or more of the ASTM, ASME or American Petroleum Institute (API) specifications listed below: • ASTM A-53; • ASTM A-106; • ASTM A-179 (ASME SA 179); • ASTM A-192 (ASME SA 192); • ASTMA-209 (ASME SA 209); • ASTM A-210 (ASME SA 210); • ASTM A-213 (ASME SA 213); • ASTM A-334 (ASME SA 334); • ASTM A-423 (ASME SA 423); • ASTM A-498; • ASTM A-496 (ASME SA 496); • ASTM A-199; • ASTM A-500; • ASTM A-556; • ASTM A-565; • API 5L; and • API 5CT except that any cold-drawn tubing product certified to one of the above excluded specifications will not be excluded from the scope if it is also dual-or multiple-certified to any other specification that otherwise would fall within the scope of this investigation. The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7304.31.3000, 7304.31.6050, 7304.51.1000, 7304.51.5005, 7304.51.5060, 7306.30.5015, 7306.30.5020, 7306.50.5030. Subject merchandise may also enter under numbers 7306.30.1000 and 7306.50.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive. 3. This investigation has been assigned investigation number A-580-892. 4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OVIII:RMJ.) 5. There are no restrictions on the release of this information. Alexander Amdur

Frequently asked questions

What is CSMS 7136307?

CSMS 7136307 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin titled "Initiation of antidumping duty investigation of certain cold-drawn mechanical tubing of carbon and alloy steel from the Republic of Korea (A-580-892)". CSMS bulletins are the operational instructions CBP issues to brokers, importers, and ACE filers covering rate changes, system updates, scope guidance, and other day-to-day customs-operations changes.

When was CSMS 7136307 published?

CBP published CSMS 7136307 on May 16, 2017. The bulletin's instructions are typically operative as of the publication date unless the body specifies a different effective date.

Which AD/CVD cases does CSMS 7136307 affect?

CSMS 7136307 references 1 AD/CVD case (A-580-892). The links on this page take you to each linked order with its current scope, rates, and history.

Is the CBP CSMS the legally binding instruction?

Learn more

Tandom guides relevant to CBP CSMS messages

Trade compliance APIs in broker workflows

Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.

Open resource

Find the right manufacturer or exporter rate in an AD/CVD order

Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.