Message body
Full text as published by U.S. Customs and Border Protection
1.
On 11/25/2015, Commerce published in the Federal Register its initiation of the antidumping duty investigation of circular welded carbon-quality steel pipe from the UAE (80 FR 73708).
2.
This investigation
covers welded carbon-quality steel pipes and tube, of circular cross-section, with an outside diameter (O.D.) not more than nominal 16 inches (406.4 mm), regardless of wall thickness, surface finish (e.g., black, galvanized, or painted), end finish (plain end, beveled end, grooved, threaded, or threaded and coupled), or industry specification (e.g., American Society for Testing and Materials International (ASTM), proprietary, or other), generally known as standard pipe, fence pipe and tube, sprinkler pipe, and structural pipe (although subject product may also be referred to as mechanical tubing).
Specifically, the term “carbon quality” includes products in which:
(a) iron predominates, by weight, over each of the other contained elements;
(b) the carbon content is 2 percent or less, by weight; and
(c) none of the elements listed below exceeds the quantity, by weight, as indicated:
(i) 1.80 percent of manganese;
(ii) 2.25 percent of silicon;
(iii) 1.00 percent of copper;
(iv) 0.50 percent of aluminum;
(v) 1.25 percent of chromium;
(vi) 0.30 percent of cobalt;
(vii) 0.40 percent of lead;
(viii) 1.25 percent of nickel;
(ix) 0.30 percent of tungsten;
(x) 0.15 percent of molybdenum;
(xi) 0.10 percent of niobium;
(xii) 0.41 percent of titanium;
(xiii) 0.15 percent of vanadium; or
(xiv) 0.15 percent of zirconium.
Covered products are generally made to standard O.D. and wall thickness combinations.
Pipe multi-stenciled to a standard and/or structural specification and to other specifications, such as American Petroleum Institute (API) API-5L, is also covered by the scope of these investigations when it meets the physical description set forth above.
Covered products may also possess one or more of the following characteristics: is 32 feet in length or less; is less than 2.0 inches (50mm) in nominal O.D.; has a galvanized and/or painted (e.g., polyester coated) surface finish; or has a threaded and/or coupled end finish.
Standard pipe is ordinarily made to ASTM specifications A53, A135, and A795, but can also be made to other specifications.
Structural pipe is made primarily to ASTM specifications A252 and A500.
Standard and structural pipe may also be produced to proprietary specifications rather than to industry specifications.
Sprinkler pipe is designed for sprinkler fire suppression systems and may be made to industry specifications such as ASTM A53 or to proprietary specifications.
Fence tubing is included in the scope regardless of certification to a specification listed in the exclusions below, and can also be made to the ASTM A513 specification.
Products that meet the physical description set forth above but are made to the following nominal outside diameter and wall thickness combinations, which are recognized by the industry as typical for fence tubing, are included despite being certified to ASTM mechanical tubing specifications:
O.D. in inches (nominal) Wall thickness in inches (nominal Gage
1.315 0.035 20
1.315 0.047 18
1.315 0.055 17
1.315 0.065 16
1.315 0.072 15
1.315 0.083 14
1.315 0.095 13
1.660 0.055 17
1.660 0.065 16
1.660 0.083 14
1.660 0.095 13
1.660 0.109 12
1.900 0.047 18
1.900 0.055 17
1.900 0.065 16
1.900 0.072 15
1.900 0.095 13
1.900 0.109 12
2.375 0.047 18
2.375 0.055 17
2.375 0.065 16
2.375 0.072 15
2.375 0.095 13
2.375 0.109 12
2.375 0.120 11
2.875 0.109 12
2.875 0.165 8
3.500 0.109 12
3.500 0.165 8
4.000 0.148 9
4.000 0.165 8
4.500 0.203 7
The scope of this investigation does not include:
(a) pipe suitable for use in boilers, superheaters, heat exchangers, refining furnaces and feedwater heaters, whether or not cold drawn, which are defined by standards such as ASTM A178 or ASTM A192;
(b) finished electrical conduit, i.e., Electrical Rigid Steel Conduit (aka Electrical Rigid Metal Conduit and Electrical Rigid Metal Steel Conduit), Finished Electrical Metallic Tubing, and Electrical Intermediate Metal Conduit, which are defined by specifications such as American National Standard (ANSI) C80.1-2005, ANSI C80.3-2005, or ANSI C80.6-2005, and Underwriters Laboratories Inc. (UL) UL-6, UL-797, or UL-1242;
(c) finished scaffolding, i.e., component parts of final, finished scaffolding that enter the United States unassembled as a “kit.” A kit is understood to mean a packaged combination of component parts that contains, at the time of importation, all of the necessary component parts to fully assemble final, finished scaffolding;
(d) tube and pipe hollows for redrawing;
(e) oil country tubular goods produced to API specifications;
(f) line pipe produced to only API specifications, such as API 5L, and not multi-stenciled; and
(g) mechanical tubing, whether or not cold-drawn, other than what is included in the above paragraphs.
The products subject to this investigation are currently classifiable in Harmonized Tariff Schedule of the United States (HTSUS) statistical reporting numbers 7306.19.1010, 7306.19.1050, 7306.19.5110, 7306.19.5150, 7306.30.1000, 7306.30.5015, 7306.30.5020, 7306.30.5025, 7306.30.5032, 7306.50.5030, 7306.30.5040, 7306.30.5055, 7306.30.5085, 7306.30.5090, 7306.50.1000, 7306.50.5050, and 7306.50.5070. However, the product description, and not the HTSUS classification, is dispositive of whether the merchandise imported into the United States falls within the scope.
3.
This investigation has been assigned investigation number A-520-807.
4.
If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984.
CBP ports should submit their inquiries through authorized CBP channels only.
(This message was generated by OII:AR.)
5.
There are no restrictions on the release of this information.
Sherri L. Hoffman