Initiation of Antidumping and Countervailing Duty Investigations: Certain Steel Nails from India, the Sultanate of Oman, Sri Lanka, Thailand, and the Republic of Turkey

CSMS #50859290 - Initiation of Antidumping and Countervailing Duty Investigations: Certain Steel Nails from India, the Sultanate of Oman, Sri Lanka, Thailand, and the Republic of Turkey U.S. Customs and Border Protection sent this bulletin at 01/28/2022 12:28 PM EST   Cargo Systems Messaging Service CSMS #50859290 - Initiation of Antidumping and Countervailing Duty Investigations: Certain Steel Nails from India, the Sultanate of Oman, Sri Lanka, Thailand, and the Republic of Turkey CSMS #50859290 Cargo System Messaging Service Announcement of Initiation of Antidumping and Countervailing Duty Investigations: Certain Steel Nails from India, the Sultanate of Oman, Sri Lanka, Thailand, and the Republic of Turkey On January 19, 2022, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Certain Steel Nails from India, the Sultanate of Oman, Sri Lanka, Thailand, and the Republic of Turkey” (Initiation Notices).  These investigations have been assigned the following case numbers: A-533-904 and C-533-905 (India) C-523-817 (Oman) A-542-804 and C-542-805 (Sri Lanka) A-549-844 and C-549-845 (Thailand) A-489-846 and C-489-847 (Turkey). Scope of merchandise covered by these investigations: The merchandise covered by these investigations is certain steel nails having a nominal shaft or shank length not exceeding 12 inches.  Certain steel nails include, but are not limited to, nails made from round wire and nails that are cut from flat-rolled steel or long-rolled flat steel bars. Certain steel nails may be of one-piece construction or constructed of two or more pieces.  Examples of nails constructed of two or more pieces include, but are not limited to, anchors comprised of an anchor body made of zinc or nylon and a steel pin or a steel nail; crimp drive anchors; split-drive anchors, and strike pin anchors.  Also included in the scope are anchors of one-piece construction. Certain steel nails may be produced from any type of steel, and may have any type of surface finish, head type, shank, point type and shaft diameter.  Finishes include, but are not limited to, coating in vinyl, zinc (galvanized, including but not limited to electroplating or hot dipping one or more times), phosphate, cement, and paint.  Certain steel nails may have one or more surface finishes.  Head styles include, but are not limited to, flat, projection, cupped, oval, brad, headless, double, countersunk, and sinker.  Shank or shaft styles include, but are not limited to, smooth, barbed, screw threaded, ring shank and fluted. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the nail using a tool that engages with the head.  Point styles include, but are not limited to, diamond, needle, chisel and blunt or no point.  Certain steel nails may be sold in bulk, or they may be collated in any manner using any material. Excluded from the scope are certain steel nails packaged in combination with one or more non-subject articles, if the total number of nails of all types, in aggregate regardless of size, is less than 25.  If packaged in combination with one or more non-subject articles, certain steel nails remain subject merchandise if the total number of nails of all types, in aggregate regardless of size, is equal to or greater than 25, unless otherwise excluded based on the other exclusions below. Also excluded from the scope are certain steel nails with a nominal shaft or shank length of one inch or less that are a component of an unassembled article, where the total number of nails is sixty (60) or less, and the imported unassembled article falls into one of the following eight groupings:  (1) Builders’ joinery and carpentry of wood that are classifiable as windows, French-windows and their frames; (2) builders’ joinery and carpentry of wood that are classifiable as doors and their frames and thresholds; (3) swivel seats with variable height adjustment; (4) seats that are convertible into beds (with the exception of those classifiable as garden seats or camping equipment); (5) seats of cane, osier, bamboo or similar materials; (6) other seats with wooden frames (with the exception of seats of a kind used for aircraft or motor vehicles); (7) furniture (other than seats) of wood (with the exception of (i) medical, surgical, dental or veterinary furniture; and (ii) barbers’ chairs and similar chairs, having rotating as well as both reclining and elevating movements); or (8) furniture (other than seats) of materials other than wood, metal, or plastics ( e.g. , furniture of cane, osier, bamboo or similar materials).  The aforementioned imported unassembled articles are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings:  4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 9403.89. Also excluded from the scope of these investigations are nails suitable for use in powder-actuated hand tools, whether or not threaded, which are currently classified under HTSUS subheadings 7317.00.2000 and 7317.00.3000. Also excluded from the scope of these investigations are nails suitable for use in gas-actuated hand tools.  These nails have a case hardness greater than or equal to 50 on the Rockwell Hardness C scale (HRC), a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point. Also excluded from the scope of these investigations are corrugated nails.  A corrugated nail is made up of a small strip of corrugated steel with sharp points on one side. Also excluded from the scope of these investigations are thumb tacks, which are currently classified under HTSUS subheading 7317.00.1000. Also excluded from the scope are decorative or upholstery tacks. Certain steel nails subject to these investigations are currently classified under HTSUS subheadings 7317.00.5501, 7317.00.5502, 7317.00.5503, 7317.00.5505, 7317.00.5507, 7317.00.5508, 7317.00.5511, 7317.00.5518, 7317.00.5519, 7317.00.5520, 7317.00.5530, 7317.00.5540, 7317.00.5550, 7317.00.5560, 7317.00.5570, 7317.00.5580, 7317.00.5590, 7317.00.6530, 7317.00.6560 and 7317.00.7500.  Certain steel nails subject to these investigations also may be classified under HTSUS subheadings 7318.15.5060, 7318.15.5090, 7907.00.6000, 8206.00.0000 or other HTSUS subheadings.  While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of these investigations is dispositive. Requirements For Submitting Comments On The Scope Of The Investigations:   Please be sure to comply with all three requirements established below. Deadline for Submitting Comments: As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope).  The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate.  If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information.  Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on February 8, 2022, which is 20 calendar days from the signature date of this notice.  Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on February 18, 2022, which is 10 calendar days after the initial comments deadline.  Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period.  However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information.  All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above. Note that the scope inadvertently includes HTSUS subheading 7318.15.5060, which is no longer active.  The correct subheading should be 7318.15.5090, which is already included in the scope.  Commerce has invited parties to comment on this as well. Required Entry of Appearance: Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance.  Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access).  Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.  If you have an E-Filer account for Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS), you may also enter your appearance by logging into ACCESS at https://access.trade.gov and clicking on “Manage Entry of Appearance” and then “Create New Entry of Appearance.” All submissions to Commerce must be filed electronically using ACCESS.  An electronically filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due.  Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information until further notice.[1] For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures: ACCESS:  Help Link  https://access.trade.gov/help.aspx ACCESS:  External User Guide https://access.trade.gov/help/ACCESS_User_Guide.pdf ACCESS:  Handbook on Electronic Filing Procedures https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf Federal Register notice:  Antidumping and Countervailing Duty Proceedings:  Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011) http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf Enforcement and Compliance:  Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf Enforcement and Compliance:  General Filing Requirements https://enforcement.trade.gov/filing/index.html Required Certifications Please note that certification requirements are in effect for company / government officials as well as their representatives.  In all segments of antidumping duty or countervailing duty proceedings, parties submitting factual information must adhere to 19 CFR 351.303(g) regarding the requirement to certify submissions of factual information. Understanding Critical Circumstances for Antidumping and Countervailing Duties Critical circumstances is a provision in both the antidumping and countervailing Duty (AD/CVD) laws that allows for the limited retroactive imposition of duties if certain conditions are met.  Importers should be aware that entries of subject merchandise made after the initiation of an AD/CVD investigation may retroactively be subject to AD/CVD .   A finding of critical circumstances is an important tool for Commerce and the U.S. International Trade Commission (ITC) to offset possible import surges during the early period of an AD/CVD investigation.  The petitioner in an AD/CVD investigation may allege critical circumstances during an investigation up to 21 days before the date of Commerce’s final determination.  If Commerce makes a determination that critical circumstances exist, it has the statutory authority to order the retroactive suspension of liquidation and posting of a cash deposit for entries made before the issuance of a Preliminary and/or Final AD/CVD determination.  Commerce’s authority to suspend entries retroactively for AD/CVD is limited to those entries made on or after the later of: (1) 90 days before the effective date the suspension of liquidation was first ordered, or (2) the date on which the determination to initiate the investigation is published in the Federal Register.  In either case, AD/CVD cash deposits are due on entries subject to critical circumstances determinations. If, following a preliminary determination by Commerce that critical circumstances exist, both Commerce and the ITC reach a final affirmative determination of dumping or subsidization, but either agency makes a negative final determination of critical circumstances, Commerce will instruct U.S. Customs and Border Protection (CBP) to lift suspension from the entries made during the 90-day critical circumstances period and refund cash deposits made with respect to those entries.  Interest is not payable on refunds of cash deposits at this stage in the AD/CVD case.  For Further Information Contact: AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230:  Thomas Martin at (202) 482-3936 (Countervailing Duty Investigation from the Sultanate of Oman); David Lindgren at (202) 482-1671 and Genevieve Coen at (202) 482-3251 (Antidumping and Countervailing Duty Investigations from India); Allison Hollander at (202) 482-2805 and Nathan James at (202) 482-5305 (Antidumping and Countervailing Duty Investigations from Sri Lanka);  Laurel LaCivita at (202) 482-4243 and Charles Doss at (202) 482-4474 (Antidumping and Countervailing Duty Investigations from Thailand);  Tara Moran at (202) 482-3619 and Benjamin Luberda at (202) 482-2185 (Antidumping and Countervailing Duty Investigations from the Republic of Turkey).  Determinations related to these proceedings, issued by Commerce and the ITC, will be published in the Federal Register.  Parties may also view Commerce’s public AD/CVD instructions to CBP in ACE and “ADD CVD Search” at https://aceservices.cbp.dhs.gov/adcvdweb . [1] See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 10, 2020).     Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page . You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com . This service is provided to you at no charge by U.S. Customs and Border Protection . Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes. Powered by Privacy Policy | Cookie Statement | Help