Initiation of AD/CVD Investigations: Mattresses from multiple countries

CSMS #42461277 - Initiation of AD/CVD Investigations: Mattresses from multiple countries U.S. Customs and Border Protection sent this bulletin at 04/22/2020 05:07 PM EDT   Cargo Systems Messaging Service CSMS #42461277 - Initiation of AD/CVD Investigations: Mattresses from multiple countries Cargo System Messaging Service Announcement of Initiation of Antidumping and Countervailing Duty Investigations: Mattresses from Cambodia, Indonesia, Malaysia, Serbia, Thailand, the Republic of Turkey, the Socialist Republic of Vietnam, and the People’s Republic of China On April 20, 2020, the Department of Commerce (Commerce) initiated its antidumping duty investigations on “Mattresses from Cambodia, Indonesia, Malaysia, Serbia, Thailand, the Republic of Turkey (Turkey), and the Socialist Republic of Vietnam (Vietnam)” and its countervailing duty investigation on “Mattresses from the People’s Republic of China (China)” (Initiation Notices). These investigations have been assigned the following case numbers: A-555-001(Cambodia), A-560-836 (Indonesia), A-557-818 (Malaysia), A-801-002 (Serbia), A-549-841(Thailand), A-489-841 (Turkey), A-552-827 (Vietnam) and C-570-128 (China). The Scope of Merchandise covered by these investigations reads as follows: The products covered by these investigations are all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses may also contain (1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress, or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or (2) “ticking,” the outermost layer of fabric or other material (e.g., vinyl) that encloses the core and any upholstery, also known as a cover. The scope of these investigations is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of size or size description. The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units. “Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams (e.g., polyurethane, memory (viscoelastic), latex foam, gel-infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling. Mattresses covered by the scope of these investigations may be imported independently, as part of furniture or furniture mechanisms (e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set in combination with a “mattress foundation.” “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set, in combination with a mattress foundation. Excluded from the scope of these investigations are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon. Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress. Also excluded is certain multifunctional furniture that is convertible from seating to sleeping, regardless of filler material or components, where that filler material or components are upholstered, integrated into the design and construction of, and inseparable from, the furniture framing, and the outermost layer of the multifunctional furniture converts into the sleeping surface. Such furniture may, and without limitation, be commonly referred to as “convertible sofas,” “sofa beds,” “sofa chaise sleepers,” “futons,” “ottoman sleepers” or a like description. Also excluded from the scope of these investigations are any products covered by the existing antidumping duty orders on uncovered innerspring units from China or Vietnam. See Uncovered Innerspring Units from the People’s Republic of China: Notice of Antidumping Duty Order, 74 Fed. Reg. 7661 (Feb. 19, 2009); Uncovered Innerspring Units From the Socialist Republic of Vietnam, 73 Fed. Reg. 75391 (Dec. 11, 2008). Also excluded from the scope of these investigations are bassinet pads with a nominal length of less than 39 inches, a nominal width less than 25 inches, and a nominal depth of less than 2 inches. Additionally, also excluded from the scope of these investigations are “mattress toppers.” A “mattress topper” is a removable bedding accessory that supplements a mattress by providing an additional layer that is placed on top of a mattress. Excluded mattress toppers have a nominal height of four inches or less. The products subject to these investigations are currently properly classifiable under HTSUS subheadings: 9404.21.0010, 9404.21.0013, 9404.29.1005, 9404.29.1013, 9404.29.9085, and 9404.29.9087. Products subject to these investigations may also enter under HTSUS subheadings: 9404.21.0095, 9404.29.1095, 9404.29.9095, 9401.40.0000, and 9401.90.5081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to these investigations is dispositive. Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below. Deadline for Submitting Comments: As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on May 11, 2020, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on May 21, 2020, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above. Required Entry of Appearance: Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address. All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until May 19, 2020, unless extended. For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures: ACCESS: Help Link https://access.trade.gov/help.aspx ACCESS: External User Guide https://access.trade.gov/help/ACCESS_User_Guide.pdf ACCESS: Handbook on Electronic Filing Procedures https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011) http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html Required Certifications Please note that certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings, parties submitting factual information must adhere to 19 CFR 351.303(g) regarding the requirement to certify submissions of factual information. Understanding Critical Circumstances for Antidumping and Countervailing Duties Critical circumstances is a provision in both the antidumping and countervailing Duty (AD/CVD) laws that allows for the limited retroactive imposition of duties if certain conditions are met. Importers should be aware that entries of subject merchandise made after the initiation of an AD/CVD investigation may retroactively be subject to AD/CVD. A finding of critical circumstances is an important tool for Commerce and the U.S. International Trade Commission (ITC) to offset possible import surges during the early period of an AD/CVD investigation. The petitioner in an AD/CVD investigation may allege critical circumstances during an investigation up to 21 days before the date of Commerce’s final determination. If Commerce makes a determination that critical circumstances exist, it has the statutory authority to order the retroactive suspension of liquidation and posting of a cash deposit for entries made before the issuance of a Preliminary and/or Final AD/CVD determination. Commerce’s authority to suspend entries retroactively for AD/CVD is limited to those entries made on or after the later of: (1) 90 days before the effective date the suspension of liquidation was first ordered, or (2) the date on which the determination to initiate the investigation is published in the Federal Register. In either case, AD/CVD cash deposits are due on entries subject to critical circumstances determinations. If, following a preliminary determination by Commerce that critical circumstances exist, both Commerce and the ITC reach a final affirmative determination of dumping or subsidization, but either agency makes a negative final determination of critical circumstances, Commerce will instruct U.S. Customs and Border Protection (CBP) to lift suspension from the entries made during the 90-day critical circumstances period and refund cash deposits made with respect to those entries. Interest is not payable on refunds of cash deposits at this stage in the AD/CVD case. For Further Information Contact: AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230: John McGowan at (202) 482-3019 (AD Investigation from Cambodia); Michael Bowen at (202) 482-0768 (AD Investigation from Indonesia); Joshua Simonidis at (202) 482-0608 (AD Investigation from Malaysia); Joshua A. DeMoss at (202) 482-3362 (AD Investigation from Serbia); Paola Aleman Ordaz at (202) 482-4031 (AD Investigation from Thailand); Jacob Keller at (202) 482-4849 (AD Investigation from Turkey); Dakota Potts at (202) 482-0223 (AD Investigation from Vietnam); and Theodore Pearson at (202) 482-2631 (CVD Investigation from China). Determinations related to these proceedings, issued by Commerce and the ITC, will be published in the Federal Register. Parties may also view Commerce’s public AD/CVD instructions to CBP in ACE and “ADD CVD Search” at https://aceservices.cbp.dhs.gov/adcvdweb .   Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page . You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com . This service is provided to you at no charge by U.S. Customs and Border Protection . Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes. Powered by Privacy Policy | Cookie Statement | Help