CSMS 0147412·Trade policy·May 26, 2020·View on csms.cbp.gov ↗

Notice of affirmative preliminary CVD determination and alignment of the final CVD determination with the AD investigation of forged steel fluid end blocks from the Federal Republic of Germany (C-428-848)

Plain-English explanation

CSMS 0147412 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin (trade policy), published on May 26, 2020. It carries the official CBP guidance brokers and importers must follow for the topic — "Notice of affirmative preliminary CVD determination and alignment of the final CVD determination with the AD investigation of forged steel fluid end blocks from the Federal Republic of Germany (C-428-848)". It links to 1 AD/CVD case in Tandom's catalog. CSMS messages are the operational layer between Commerce determinations and at-the-border collections: when Commerce publishes a new rate, scope ruling, or instruction, CBP turns it into a CSMS that ACE/ACS systems and brokers act on.

Linked AD/CVD cases(1)

Cases referenced or affected by this CSMS message

C-428-848

Message body

Full text as published by U.S. Customs and Border Protection

1. On 05/26/2020, Commerce published in the Federal Register its affirmative preliminary determination in the countervailing duty (CVD) investigation of forged steel fluid end blocks from the Federal Republic of Germany (85 FR 31454). Additionally, Commerce has aligned the deadline for the final determination in the CVD investigation with the deadline for the final determination in the companion antidumping duty investigation of the same merchandise, currently scheduled to be issued no later than 09/29/2020. 2. The products covered by this investigation are forged steel fluid end blocks (fluid end blocks), whether in finished or unfinished form, and which are typically used in the manufacture or service of hydraulic pumps. The term "forged" is an industry term used to describe the grain texture of steel resulting from the application of localized compressive force. Illustrative forging standards include, but are not limited to, American Society for Testing and Materials (ASTM) specifications A668 and A788. For purposes of this investigation, the term "steel" denotes metal containing the following chemical elements, by weight: (i) iron greater than or equal to 60 percent; (ii) nickel less than or equal to 8.5 percent; (iii) copper less than or equal to 6 percent; (iv) chromium greater than or equal to 0.4 percent, but less than or equal to 20 percent; and (v) molybdenum greater than or equal to 0.15 percent, but less than or equal to 3 percent. Illustrative steel standards include, but are not limited to, American Iron and Steel Institute (AISI) or Society of Automotive Engineers (SAE) grades 4130, 4135, 4140, 4320, 4330, 4340, 8630, 15-5, 17-4, F6NM, F22, F60, and XM25, as well as modified varieties of these grades. The products covered by this investigation are: (1) cut-to-length fluid end blocks with an actual height (measured from its highest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), an actual width (measured from its widest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), and an actual length (measured from its longest point) of 11 inches (279.4 mm) to 75 inches (1,905.0 mm); and (2) strings of fluid end blocks with an actual height (measured from its highest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), an actual width (measured from its widest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), and an actual length (measured from its longest point) up to 360 inches (9,144.0 mm). The products included in the scope of this investigation have a tensile strength of at least 70 KSI (measured in accordance with ASTM A370) and a hardness of at least 140 HBW (measured in accordance with ASTM E10). A fluid end block may be imported in finished condition (i.e., ready for incorporation into a pump fluid end assembly without further finishing operations) or unfinished condition (i.e., forged but still requiring one or more finishing operations before it is ready for incorporation into a pump fluid end assembly). Such finishing operations may include: (1) heat treating; (2) milling one or more flat surfaces; (3) contour machining to custom shapes or dimensions; (4) drilling or boring holes; (5) threading holes; and/or (6) painting, varnishing, or coating. Excluded from the scope of this investigation are fluid end block assemblies which (1) include (a) plungers and related housings, adapters, gaskets, seals, and packing nuts, (b) valves and related seats, springs, seals, and cover nuts, and (c) a discharge flange and related seals, and (2) are otherwise ready to be mated with the "power end" of a hydraulic pump without the need for installation of any plunger, valve, or discharge flange components, or any other further manufacturing operations. The products included in the scope of this investigation may enter under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7218.91.0030, 7218.99.0030, 7224.90.0015, 7224.90.0045, 7326.19.0010, 7326.90.8688, or 8413.91.9055. While these HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the investigation is dispositive. 3. This proceeding has been assigned case number C-428-848. 4. Accordingly, CBP shall suspend liquidation of subject merchandise entered, or withdrawn from warehouse, for consumption on or after 05/26/2020 (the date of publication of the preliminary determination), and shall require, for such entries, a cash deposit equal to the percentages of entered value for the producers and/or exporters listed below. Producer and/or Exporter: BGH Edelstahl Siegen GmbH, and its cross-owned companies: Boschgotthardshütte O. Breyer GmbH, BGH Edelstahlwerke GmbH, Rohstoff-, Press- und Schneidbetrieb Siegen GmbH, and SRG Schrott und Recycling GmbH Case Number: C-428-848-001 Cash Deposit: 5.25 percent Producer and/or Exporter: Schmiedewerke Gröditz GmbH, and its cross-owned companies: GMH Schmiedetechnik GmbH, Georgsmarienhütte Holding GmbH, and GHM Recycling GmbH Case Number: C-428-848-002 Cash Deposit: 6.06 percent Producer and/or Exporter: voestalpine Bohler Group Case Number: C-428-848-003 Cash Deposit: 10.04 percent Producer and/or Exporter: All Others Case Number: C-428-848-000 Cash Deposit Rate: 5.61 percent 5. If there are any questions by the public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OVIII:JD.) 6. There are no restrictions on the release of this information. Alexander Amdur

Frequently asked questions

What is CSMS 0147412?

CSMS 0147412 is a U.S. Customs and Border Protection (CBP) Cargo Systems Messaging Service bulletin titled "Notice of affirmative preliminary CVD determination and alignment of the final CVD determination with the AD investigation of forged steel fluid end blocks from the Federal Republic of Germany (C-428-848)". CSMS bulletins are the operational instructions CBP issues to brokers, importers, and ACE filers covering rate changes, system updates, scope guidance, and other day-to-day customs-operations changes.

When was CSMS 0147412 published?

CBP published CSMS 0147412 on May 26, 2020. The bulletin's instructions are typically operative as of the publication date unless the body specifies a different effective date.

Which AD/CVD cases does CSMS 0147412 affect?

CSMS 0147412 references 1 AD/CVD case (C-428-848). The links on this page take you to each linked order with its current scope, rates, and history.

Is the CBP CSMS the legally binding instruction?

Learn more

Tandom guides relevant to CBP CSMS messages

Trade compliance APIs in broker workflows

Where trade compliance APIs fit in a broker's filing pipeline: HTS classification, duty calculation, AD/CVD scope match, and post-summary corrections.

Open resource

Find the right manufacturer or exporter rate in an AD/CVD order

Cash deposit cascade, separate rates, all-others, and PRC-wide rates. Worked example on case A-570-910 (galvanized welded steel pipe from China) with three exporter-specific rates.